Search NASA⌕ Search

Engineering topics

Mitchell, C. M.

Publications and source records attributed to Mitchell, C. M..

11 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

Atmospheric Entry Studies and the Smallest Impact Craters on Mars

High-resolution images from the Mars Orbiter Camera reveal impact craters as small as 10 m [1], and still smaller craters (< 0.5 m) have been inferred from surface boulders at the Pathfinder landing site [2]. Any small-scale impact environment at scales of meters or smaller would obviously be a potent contributor to erosive processes on Mars, to the small-scale evolution of its surface, and to mineralogic/ compositional alterations of its surface materials. It is not very clear from the analysis of Viking and Pathfinder images, however, what the smallest craters are on Mars. As a consequence, it might be informative to consult atmospheric-entry calculations that specify the smallest meteoroid able to survive passage through the present martian atmosphere. We conducted such calculations and perceive them as providing useful constraints for understanding small-scale surface processes on Mars and as possible guides for the interpretation of surface images from past and future lander missions.

Hoerz, F.↗
NASA NTRS1994

Operator modeling in commerical aviation: Cognitive models, intelligent displays, and pilot's assistants

One of the goals of the National Aviation Safety/Automation program is to address the issue of human-centered automation in the cockpit. Human-centered automation is automation that, in the cockpit, enhances or assists the crew rather than replacing them. The Georgia Tech research program focused on this general theme, with emphasis on designing a computer-based pilot's assistant, intelligent (i.e, context-sensitive) displays, and an intelligent tutoring system for understanding and operating the autoflight system. In particular, the aids and displays were designed to enhance the crew's situational awareness of the current state of the automated flight systems and to assist the crew's situational awareness of the current state of the automated flight systems and to assist the crew in coordinating the autoflight system resources. The activities of this grant included: (1) an OFMspert to understand pilot navigation activities in a 727 class aircraft; (2) an extension of OFMspert to understand mode control in a glass cockpit, Georgia Tech Crew Activity Tracking System (GT-CATS); (3) the design of a training system to teach pilots about the vertical navigation portion of the flight management system -VNAV Tutor; and (4) a proof-of-concept display, using existing display technology, to facilitate mode awareness, particularly in situations in which controlled flight into terrain (CFIT) is a potential.

Govindaraj, T.↗
NASA NTRS1989

Characteristics of an ITS that evolves from tutor to operator's assistant

This paper discusses the motivation and goals of a research project which addresses the problems and issues of operator training in complex engineering sytems. The research proposes a tutor/aid paradigm for the design of an intelligent tutoring system (ITS) that evolves from a tutor to an operator's assistant for supervisory control of complex dynamic systems. Characteristics of an intelligent tutoring/aiding system are identified with respect to the representation of domain knowledge, the tutor's pedagogical structure, and the student knowledge representation. The research represents a first step in the design of an intelligent complex dynamic systems.

Chu, R. W.↗
NASA NTRS1985

Pilot interaction with automated airborne decision making systems

Progress was made in the three following areas. In the rule-based modeling area, two papers related to identification and significane testing of rule-based models were presented. In the area of operator aiding, research focused on aiding operators in novel failure situations; a discrete control modeling approach to aiding PLANT operators was developed; and a set of guidelines were developed for implementing automation. In the area of flight simulator hardware and software, the hardware will be completed within two months and initial simulation software will then be integrated and tested.

Rouse, W. B.↗
NASA NTRS1985

A discrete control model of PLANT

A model of the PLANT system using the discrete control modeling techniques developed by Miller is described. Discrete control models attempt to represent in a mathematical form how a human operator might decompose a complex system into simpler parts and how the control actions and system configuration are coordinated so that acceptable overall system performance is achieved. Basic questions include knowledge representation, information flow, and decision making in complex systems. The structure of the model is a general hierarchical/heterarchical scheme which structurally accounts for coordination and dynamic focus of attention. Mathematically, the discrete control model is defined in terms of a network of finite state systems. Specifically, the discrete control model accounts for how specific control actions are selected from information about the controlled system, the environment, and the context of the situation. The objective is to provide a plausible and empirically testable accounting and, if possible, explanation of control behavior.

Mitchell, C. M.↗
NASA NTRS1983

Guidelines on ergonomic aspects of control rooms

The anthropometry, workstation design, and environmental design of control rooms are outlined. The automated interface and VDTs and displays and various modes of communication between the system and the human operator using VDTs are discussed. The man in the loop is examined, the single controller single task framework and multiple controller multiple tasks issues are considered.

Mitchell, C. M.↗
NASA NTRS1983

The human as supervisor in automated systems

This hierarchical approach to information display forces the development of a set of human oriented system models which will guide the design of the displays. If the appropriate information is provided at the appropriate time, it is likely that less information will be displayed at any given time, and the quality of the displayed information will require less operator effort to integrate into an assimilatable form. A problem with contemporary control rooms is that there is too much information for an operator to be able to assimilate quickly, easily, and accurately. It is suggested that necessary direction for research in the area of automated control room design is to develop displays which provide active decision aiding for the modern controller. Displays are needed which provide information compatible with the operator's current internal model, filter out irrelevant information, and summarize and condense lower level information.

Mitchell, C. M.↗
NASA NTRS1983

A human factors methodology for real-time support applications

A general approach to the human factors (HF) analysis of new or existing projects at NASA/Goddard is delineated. Because the methodology evolved from HF evaluations of the Mission Planning Terminal (MPT) and the Earth Radiation Budget Satellite Mission Operations Room (ERBS MOR), it is directed specifically to the HF analysis of real-time support applications. Major topics included for discussion are the process of establishing a working relationship between the Human Factors Group (HFG) and the project, orientation of HF analysts to the project, human factors analysis and review, and coordination with major cycles of system development. Sub-topics include specific areas for analysis and appropriate HF tools. Management support functions are outlined. References provide a guide to sources of further information.

Murphy, E. D.↗
NASA NTRS1982

Human factors analysis of workstation design: Earth Radiation Budget Satellite Mission Operations Room

A human factors analysis addressed three related yet distinct issues within the area of workstation design for the Earth Radiation Budget Satellite (ERBS) mission operation room (MOR). The first issue, physical layout of the MOR, received the most intensive effort. It involved the positioning of clusters of equipment within the physical dimensions of the ERBS MOR. The second issue for analysis was comprised of several environmental concerns, such as lighting, furniture, and heating and ventilation systems. The third issue was component arrangement, involving the physical arrangement of individual components within clusters of consoles, e.g., a communications panel.

Stewart, L. J.↗
NASA NTRS1982

Human factors dimensions in the evolution of increasingly automated control rooms for near-earth satellites

The NASA-Goddard Space Flight Center is responsible for the control and ground support for all of NASA's unmanned near-earth satellites. Traditionally, each satellite had its own dedicated mission operations room. In the mid-seventies, an integration of some of these dedicated facilities was begun with the primary objective to reduce costs. In this connection, the Multi-Satellite Operations Control Center (MSOCC) was designed. MSOCC represents currently a labor intensive operation. Recently, Goddard has become increasingly aware of human factors and human-machine interface issues. A summary is provided of some of the attempts to apply human factors considerations in the design of command and control environments. Current and future activities with respect to human factors and systems design are discussed, giving attention to the allocation of tasks between human and computer, and the interface for the human-computer dialogue.

Mitchell, C. M.↗