Search NASA⌕ Search

Engineering topics

Mittal, Ashutosh

Publications and source records attributed to Mittal, Ashutosh.

At least 19 records

A simultaneous depolymerization and hydrodeoxygenation process to produce lignin-based jet fuel in continuous flow reactor

Economical production of lignin-based jet fuel (LJF) can improve the sustainability of sustainable aviation fuels (SAFs) as well as can reduce the overall greenhouse gas emissions. However, the challenge lies in converting technical lignin polymer from biorefinery directly to jet fuel in a continuous operation. In this work, we demonstrate a simultaneous depolymerization and hydrodeoxygenation (SDHDO) process to produce lignin-based jet fuel from the alkali corn stover lignin (ACSL) using engineered Ru-HY-60-MI catalyst in a continuous flow reactor at first time. The maximum carbon yield of LJF of 17.9wt% was obtained, and it comprised of 60.2wt% monocycloalkanes, and 21.6wt% polycycloalkanes. Catalyst characterization of Ru-HY-60-MI suggested there was no significant change in HY zeolite structure and its crystallinity after catalyst engineering. Catalyst characterizations performed post the SDHDO experiments indicate presence of carbon and K content in the catalyst. K content presence in the spent catalyst was due to K + ion was exchanged between lignin solution and HY-60 while carbon presence validated the SDHDO chemistry on the catalyst surface. Tier a fuel property testing indicates that LJF production using SDHDO chemistry can offer SAF with high compatibility, good sealing properties, low emissions, and high energy density for aircraft.

09 BIOMASS FUELS↗

Effect of cellulose reducing ends and primary hydroxyl groups modifications on cellulose-cellulase interactions and cellulose hydrolysis

Cellulose reducing ends are believed to play a vital role in the cellulose recalcitrance to enzymatic conversion. However, their role in insoluble cellulose accessibility and hydrolysis is not clear. Thus, in this study, reducing ends of insoluble cellulose derived from various sources were modified by applying reducing and/or oxidizing agents. Here, the effects of cellulose reducing ends modification on cellulose reducing ends, cellulose structure, and cellulose accessibility to cellulase were evaluated along with the impact on cellulose hydrolysis with complete as well purified cellulase components. Sodium borohydride (NaBH 4 ) reduction and sodium chlorite-acetic acid (SC/AA) oxidation were able to modify more than 90% and 60% of the reducing ends, respectively, while the bicinchoninic acid (BCA) reagent applied for various cycles oxidized cellulose reducing ends to various extents. X-ray diffractograms of the treated solids showed that these treatments did not change the cellulose crystalline structure and the change in crystallinity index was insignificant. Surprisingly, it was found that the cellulose reducing ends modification, either through selective NaBH 4 reduction or BCA oxidation, had a negligible impact on cellulose accessibility as well on cellulose hydrolysis rates or final conversions with complete cellulase at loadings as low as 0.5 mg protein/g cellulose. In fact, in contrast to what is traditionally believed, modifications of cellulose reducing ends by these two methods had no apparent impact on cellulose conversion with purified cellulase components and their synergy. However, SC/AA oxidation resulted in significant drop in cellulose conversion (10%–50%) with complete as well purified cellulase components. Nonetheless, further research revealed that the cause for drop in cellulose conversion for the SC/AA oxidation case was due to primary hydroxyl groups (PHGs) oxidation and not the oxidation of reducing ends. Furthermore, it was found that the PHGs modification affects cellulose accessibility and slows the cellulase uptake as well resulting in significant drop in cellulose conversions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Life-Cycle Assessment of Sustainable Aviation Fuel Derived from Paper Sludge

Converting waste paper sludge to sustainable aviation fuel (SAF) offers a circular economy strategy to decarbonize the aviation sector. Here, this study develops a life-cycle assessment (LCA) for converting high-ash paper sludge to SAF in the U.S. using a catalytic sugar upgrading system that consists of ash removal, enzymatic hydrolysis, dehydration, aldol condensation, and hydroprocessing. The LCA is coupled with a process simulation for an industrial-scale biorefinery based on experimental data. We quantified the carbon intensity as 35.7–41.8 gCO 2 eq MJ –1 SAF (–636 to –584 gCO 2 eq per dry kg paper sludge) with acetone as a solvent, renewable fuel, and biobased chemicals; this is further reduced to 5.1–11.1 gCO 2 eq MJ –1 (–925 to –873 gCO 2 eq per dry kg paper sludge) if ash is recycled and used for substituting cement. Converting 1 dry kg paper sludge to SAF with acetone, renewable fuel, and biobased chemicals (–925 to –584 gCO 2 eq) is more climate beneficial than landfilling without landfill gas recovery (791 gCO 2 eq) and with landfill gas recovery (–294 gCO 2 eq). More than 330 million gallons of SAF can be produced annually (>4 million dry t paper sludge/year in the U.S.), resulting in a reduction of 2–7 million tCO 2 eq.

09 BIOMASS FUELS↗

Techno-economic analysis of biomass value-added processing informed by pilot scale de-ashing of paper sludge feedstock

Paper sludge biomass represents an underutilized feedstock rich in pulped and processed cellulose which is currently a waste stream with significant disposal cost to industry for landfilling services. Effective fractionation of the cellulose from paper sludge presents an opportunity to yield cellulose as feedstock for value-added processes. A novel approach to cellulose fractionation is the sidehill screening system, herein studied at the pilot-plant scale. Composition analysis determined ash removal and carbohydrate retention of both sidehill and high-performance benchtop screening systems. Sidehill screening resulted in greater carbohydrates retention relative to benchtop screening (90% vs 66%) and similar ash removal (95% vs 98%). Techno-economic analysis for production of sugar syrup yielded a minimum selling price of $331/metric ton of sugar syrup including disposal savings, significantly less than a commercial sugar syrup without fractionation. Furthermore, sensitivity analysis showed that screening conditions played a significant role in economic feasibility for cellulosic yield and downstream processes.

09 BIOMASS FUELS↗

Engineered $\mathrm{Ru}$ on $\mathrm{HY}$ zeolite catalyst for continuous and selective hydrodeoxygenation of lignin phenolics to cycloalkanes under moderate conditions

Here we report a continuous selective hydrodeoxygenation (HDO) process of guaiacol conversion to cycloalkanes under 180 °C/1 MPa, which results in improved HDO chemistry for lignin-based jet fuel production. The incipient wetness impregnation method was modified to prepare an HY zeolite-supported Ru catalyst with better metal dispersion and acid site uniformity, which overcomes the low conversion and selectivity of previous literature. The modified catalyst (Ru-HY-60-MI) was tested in a continuous fixed bed reactor, resulting in increased HDO conversion of guaiacol to cycloalkanes compared to the unmodified catalyst. Pressure, temperature, and weight hourly space velocity-dependent tests validate guaiacol HDO over Ru-HY-60-MI catalyzed ring hydrogenation of guaiacol to 2-methoxycyclohexanol, acid-catalyzed demethoxylation and dehydration to cyclohexene, and further hydrogenation of cyclohexene to cyclohexane. These experiments enable exploring a continuous HDO process, demonstrate effectiveness for other ß-ß and a-O-4 lignin representatives and real lignin bio-oil, and pave the way towards commercialization of lignin-based jet fuel

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A critical review of existing and emerging technologies and systems to optimize solid waste management for feedstocks and energy conversion

Solid waste generation and its accumulation is increasing at an alarming pace due to population growth and urbanization posing severe risks to health, safety, and natural ecosystems. Herein this review strategically addresses the challenges and solutions to increasing the sustainability footprint of solid waste management (SWM) systems by revealing multipronged approaches that reduce solid waste and handling costs while generating revenue and reducing greenhouse gas and related emissions. For example, the United States sends ~150 million tons of waste to landfills, which is composed of over 75% organic and recyclable materials having a potential to be diverted to alternative scenarios. The emergence of an automated upstream and downstream sorting process for solid waste to increase material diversion from landfills is a promising approach for creating sustainable SWM. The utilization of artificial-intelligence-enabled smart and automated systems at the home and industrial scales, comprehensive public re-education including awareness of the adverse effects of landfilled waste on the ecosystem, and more eco-friendly product development are required to significantly reduce landfills and their negative footprint.

09 BIOMASS FUELS↗

Chapter 4 - Pretreatment Technologies for Lignocellulosic Biomass Refineries

Pretreatment is a critical step in processing lignocellulosic biomass into biofuel and bioproducts and is considered the energy and cost center of the biomass conversion process. Although a large number of pretreatment technologies have been developed, not all the techniques are viable on a commercial scale at this stage. Moreover, the technology choice and process conditions depend highly on the type of biomass and the overall biorefinery scheme. This chapter provides an overview of different pretreatment methods, including their mechanism, important process parameters, current status, and challenges. The opportunities associated with new technologies and approaches are presented. Emphasis is placed on low-severity thermal pretreatment technologies. The chapter also provides a brief discussion of the challenges to achieving the economic viability of the technologies on a commercial scale.

BIOMASS FUELS↗

Effect of ash in paper sludge on enzymatic hydrolysis

The valorization of paper sludge is a high-potential process to develop renewable fuels and chemicals, which can be integrated with pulp and paper mills. Calcium carbonate is the main ash component in sludge, which plays a role in buffering pH and potentially lowering the conversion during enzymatic hydrolysis. Therefore, it is important to investigate the effect of ash on sugar yields and examine pH change to introduce efficient and economical enzymatic hydrolysis of sludge. Carbohydrate conversion was enhanced when the ash was removed by fractionation. On the other hand, the highest sugar recovery was obtained when the sludge contained 20% ash content. The pH change during enzymatic hydrolysis was influenced by ash and explained why sludge-derived hydrolysate showed lower carbohydrate conversion. Therefore, a high shear process with the increased acid amount is suggested to prohibit the negative effect of ash and enhance the accessibility of cellulase to fibers. Finally, this study highlights the feasibility of using wet waste streams generated by the paper industry.

09 BIOMASS FUELS↗

Viscoelastic-Mapping of Cellulose Nanofibrils Using Low-Total-Force Contact Resonance Force Microscopy (LTF-CRFM)

Low-total-force contact resonance force microscopy (LTF-CRFM), an atomic force microscopy method, is introduced as a non-destructive means to quantify the local viscoelastic loss tangent (tan..delta..) of supported cellulose nanofibrils (CNFs). The method limits static and dynamic forces during measurement to minimize substrate and geometry effects and to reduce the potential for stress-induced CNF damage. LTF-CRFM uses Brownian motion to achieve the thermally-limited lowest dynamic force, while approaching adhesive pull-off to achieve the low static force. LTF-CRFM measurements were shown to generate analyzable data without evidence of nonlinear artifacts and without damage to the CNF over static forces ranging from 11.6 to 84.6 nN. The measured tan..delta.. of CNFs was 0.015 +/- 0.0094, which is the first reported tan..delta.. measurement of an isolated CNF. Finally, LTF-CRFM successfully mapped tan..delta.. along the length of CNFs to determine that kink defects along the CNF do not impart a local viscoelastic property change at the spatial resolution of the measurement.

BIOMASS FUELS↗

Techno-Economic Assessment for the Production of Hydrocarbon Fuels via Catalytic Upgrading of Furans

This technical report documents the techno-economic analysis (TEA) implications of a biochemical/catalytic pathway for the production of long-chain hydrocarbon fuels in support to the multi-lab Catalytic Upgrading of Biochemical Intermediates (CUBI) project within the Chemical Catalysis for Bioenergy Consortium (ChemCatBio). Two distinct conceptual biorefineries centered around the process encompassing sugar dehydration to furans, aldol condensation between furans and a ketone (methyl ethyl ketone [MEK]), and a final step of hydrotreating to obtain hydrocarbons in the C 14 -C 16 range are considered: an integrated plant that simultaneously produces both furans (furfural and HMF) and ketone (MEK via 2,3-butanediol [BDO]) from sugars and a dedicated facility focused on producing furans from corn stover hydrolysate and procuring the ketone externally. In either plant, the main coproducts are adipic acid (derived from lignin) and sodium sulfate. The results from the assessment are quite comparable to those reported in previous design case focused on biological conversion of sugars to fermentation intermediates with subsequent catalytic upgrading of those intermediates to hydrocarbon fuels, thus presenting another viable alternative pathway to achieve similar fuel cost targets through purely catalytic upgrading of sugars. Since this study considers long-term performance targets for the full pathway dedicated to sugar upgrading to fuels, the critical remaining research points needed to achieve future cost goals are also discussed. Finally, this report presents a single-point sensitivity analysis around selected parameters to identify the major cost drivers of the biorefineries and provides a qualitative discussion on additional opportunities for cost reduction within the proposed concepts, namely through adding value to furans, to coproducts that may be obtained following BDO dehydration, and to lignin through alternative pathways.

09 BIOMASS FUELS↗

Self-Assembling Metabolon Enables the Cell Free Conversion of Glycerol to 1,3-Propanediol

Cell free biocatalysis is showing promise as a replacement or complement to conventional microbial biocatalysts due to the potential for achieving high yields, titers, and productivities. However, there exist several challenges that need to be addressed before its broader industrial adoption is achieved. New paradigms and innovative solutions are needed to overcome these challenges. In this study we demonstrate high levels of glycerol conversion to 1,3-propanediol using a self-assembling metabolic pathway leveraging the arraying strategy (protein scaffolds) used by thermophilic cellulolytic bacteria to assemble their biomass degrading enzymes. These synthetic metabolons were capable of producing 1,3-PDO at a yield more than 95% at lower glycerol concentration and close to 70% at higher concentrations at a higher productivity rate than the equivalent microbial strain. One of the benefits of our approach is the fact that no enzyme purification is required, and that the assembly of the complex is accomplished in vivo before immobilization, while product formation is conducted in vitro. We also report the recovery of enzymatic activity upon fusion enzymes binding to these protein scaffolds, which could have broader applications when assembling arrayed protein complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Prediction of Hydroxymethylfurfural Yield in Glucose Conversion through Investigation of Lewis Acid and Organic Solvent Effects

Hydroxymethylfurfural (HMF) is one of the important renewable platform compounds that can be obtained from biomass feedstocks through glucose conversion catalyzed by Brønsted and Lewis acids. However, it is challenging to enhance the HMF yield due to side reactions. In this study, a systematic approach combining theory and experiment was performed to investigate the influence of Lewis acids and organic solvents on the HMF yield. For the Lewis acid effect, a relationship between chemical hardness and experimental HMF yields was found in the rate-limiting step of glucose-to-fructose isomerization for six metal chlorides; HMF production was promoted when the metal chloride and a substrate had a similar chemical hardness. To study the organic solvent effect, a multivariate model was developed based on the insights gained from the mechanistic study of fructose dehydration, to predict HMF yields in a given water-organic cosolvent system. It showed a reliable accuracy in evaluating HMF yields with a mean absolute error (MAE) of 3.0% with respect to experimental HMF yields for 13 solvents, and also predicted HMF yields with a MAE of 10.7% for four new solvents. Chemical interpretation of the model revealed that it is desirable to use a solvent capable of stabilizing the carbocation intermediates with low proton transfer activity and high hydrogen bond basicity, to maximize the HMF yield. This multivariate model informs experimentalists about rational selection of solvents with very low computational costs needed to calculate only six variables for each solvent. It can be expanded to other catalytic systems such as heterogeneous Brønsted–Lewis bifunctional catalysts and enables optimization of reaction conditions to obtain other useful platform molecules through biomass conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Techno-Economic Analysis of Biofuel Production via Catalytic Upgrading of Carbohydrates in Paper Sludge

A full-plant model was developed using correlations from a rigorous mass and energy balance and based on experimental results to determine the MFSP and its Sensitivity Analysis in the production of a hydrocarbon product from Paper Sludge. In this base case a preliminary MFSP of $5.97/GGE has been determined. This value is higher than the results reported in recent NREL reports. The difference is explained since much larger capacity plants are considered in those reports, and because we are not considering the production of co-products that bring the fuel costs down. The obtained model is being used to guide the next steps in our laboratory work since the team is now aware of which are the more sensitive process parameters "impacting" the MFSP of the final product.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Direct Conversion of Biomass Carbohydrates to Platform Chemicals: 5-Hydroxymethylfurfural (HMF) and Furfural

5-hydroxymethylfurfural (HMF) and furfural are promising platform molecules which can be converted to fuel intermediates and hydrocarbon fuels. Herein, one-step, direct conversion of the carbohydrates in never treated biomass to HMF and furfural in a microwave reactor was investigated. The influence of reaction temperature, time, feedstock, addition of Lewis and Bronsted acids, solvent and solvent to aqueous ratio were studied to find the optimum process conditions to maximize the yields of furfurals. The reaction conditions of 200 degrees C for 5 min with 33 mM HCl and 8 mM AlCl 3 using a dioxane/water (4:1) miscible solvent system were found to be the most conducive for direct dehydration of the glucan and hemicelluloses present in untreated poplar wood to furfural and HMF in yields of 91 and 69%, respectively. Furfural could be easily produced in yields greater than 80%, and once formed, it was found to be stable under the various process conditions explored. In contrast, HMF yields varied with both reaction time and temperature, as it readily underwent rehydration to levulinic acid in yields approaching 25-30% at increased reaction severity. The additions of both Bronsted (HCl) and Lewis (AlCl 3 ) acids in catalytic amounts, i.e., 33 and 8 mM, respectively, were required to maximize the yield of furfurals. Reactions were also performed on other feedstocks (corn stover, switchgrass, loblolly pine, and pure cellulose) to investigate the effect of feedstock type on furfurals yields. Results showed that HMF and furfural yields were primarily dependent on hexosan and pentosan loading regardless of the type of feedstock. In addition, biomass physical features, such as crystallinity or the presence of other biomass constituents, such as lignin, had little influence on furfurals yields.

09 BIOMASS FUELS↗