Search NASA⌕ Search

Engineering topics

Mittal, S.

Publications and source records attributed to Mittal, S..

The Second Radio Synchrotron Background Workshop: Conference Summary and Report

We summarize the second radio synchrotron background workshop, which took place on 2022 June 15–17 in Barolo, Italy. This meeting was convened because available measurements of the diffuse radio zero level continue to suggest that it is several times higher than can be attributed to known Galactic and extragalactic sources and processes, rendering it the least well-understood electromagnetic background at present and a major outstanding question in astrophysics. The workshop agreed on the next priorities for investigations of this phenomenon, which include searching for evidence of the radio Sunyaev–Zel’dovich effect, carrying out cross-correlation analyses of radio emission with other tracers, and supporting the completion of the 310 MHz absolutely calibrated sky map project.

79 ASTRONOMY AND ASTROPHYSICS↗

Waveform processing using neural network algorithms on the front-end electronics

In a multi-channel radiation detector readout system, waveform sampling, digitization, and raw data transmission to the data acquisition system constitute a conventional processing chain. The deposited energy on the sensor is estimated by extracting peak amplitudes, area under pulse envelopes from the raw data, and starting times of signals or time of arrivals. However, such quantities can be estimated using machine learning algorithms on the front-end Application-Specific Integrated Circuits (ASICs), often termed as “edge computing”. Edge computation offers enormous benefits, especially when the analytical forms are not fully known or the registered waveform suffers from noise and imperfections of practical implementations. In this work, we aim to predict peak amplitude from a single waveform snippet whose rising and falling edges containing only 3 to 4 samples. We thoroughly studied two well-accepted neural network algorithms, Multi-Layer Perceptron (MLP) and Convolutional Neural Network (CNN) by varying their model sizes. Further, to better fit front-end electronics, neural network model reduction techniques, such as network pruning methods and variable-bit quantization approaches, were also studied. By combining pruning and quantization, our best performing model has the size of 1.5 KB, reduced from 16.6 KB of its full model counterpart. It can reach mean absolute error of 0.034 comparing to that of a naive baseline of 0.135. Such parameter-efficient and predictive neural network models established feasibility and practicality of their deployment on front-end ASICs.

47 OTHER INSTRUMENTATION↗

Effects of Home Energy Management Systems on Distribution Utilities and Feeders Under Various Market Structure; NREL (National Renewable Energy Laboratory)

The combination of distributed energy resources (DER) and retail tariff structures to provide benefits to both utility consumers and the utilities is not well understood. To improve understanding, an Integrated Energy System Model (IESM) is being developed to simulate the physical and economic aspects of DER technologies, the buildings where they reside, and feeders servicing them. The IESM was used to simulate 20 houses with home energy management systems on a single feeder under a time-of-use (TOU) tariff to estimate economic and physical impacts on both the households and the distribution utilities. Home energy management systems (HEMS) reduce consumers’ electric bills by precooling houses in the hours before peak electricity pricing. Utilization of HEMS reduce peak loads during high price hours but shifts it to hours with off-peak and shoulder prices, resulting in a higher peak load. used to simulate 20 houses with home energy management systems on a single feeder under a time-of-use (TOU) tariff to estimate economic and physical impacts on both the households and the distribution utilities. Home energy management systems (HEMS) reduce consumers’ electric bills by precooling houses in the hours before peak electricity pricing. Utilization of HEMS reduce peak loads during high price hours but shifts it to hours with off-peak and shoulder prices, resulting in a higher peak load.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

A finite element study of incompressible flows past oscillating cylinders and aerofoils

We present our numerical results for certain unsteady flows past oscillating cylinders and aerofoils. The computations are based on the stabilized space-time finite element formulation. The implicit equation systems resulting from the space-time finite element discretizations are solved using iterative solution techniques. One of the problems studied is flow past a cylinder which is forced to oscillate in the horizontal direction. In this case we observe a change from an unsymmetric mode of vortex shedding to a symmetric one. An extensive study was carried out for the case in which a cylinder is mounted on lightly damped springs and allowed to oscillate in the vertical direction. In this case the motion of the cylinder needs to be determined as part of the solution, and under certain conditions this motion changes the vortex-shedding pattern of the flow field significantly. This nonlinear fluid-structure interaction exhibits certain interesting behavior such as 'lock-in' and 'hysteresis', which are in good agreement with the laboratory experiments carried out by other researchers in the past. Preliminary results for flow past a pitching aerofoil are also presented.

Mittal, S.↗

Finite element computation of incompressible flows

Among the solution techniques presented for FEM computation of incompressible flows are stabilized formulations designed to prevent the numerical oscillations that may be generated by (1) the presence of dominant advection terms in the governing equations, or (2) the failure to use an acceptable combination of interpolation functions to represent velocity and pressure fields. It is shown that the space-time formulation, in conjunction with the Galerkin-least squares methods, can be used to compute steady incompressible flows involving moving boundaries and interfaces; it is recommended that iteration methods be used to reduce the associated computational costs.

Tezduyar, T. E.↗

Time-accurate incompressible flow computations with quadrilateral velocity-pressure elements

Quadrilateral velocity-pressure elements with constant and linear pressure interpolations are examined in the context of time-accurate finite element computation of unsteady incompressible flows. These elements involve streamline-upwind/Petrov-Galerkin stabilization and are implemented in conjunction with the one-step and multi-step temporal integration of the Navier-Stokes equations. The two test cases chosen for the performance evaluation of the formulations are the standing vortex problem and flow past a circular cylinder at Reynolds number 100.

Tezduyar, T. E.↗

Unsteady incompressible flow computations with quadrilateral elements

A comparative investigation, based on a series of numerical tests, of various velocity-pressure elements used for incompressible flow computations is presented. These elements are implemented in conjunction with one-step and multi-step temporal integration of unsteady Navier-Stokes equations. The test cases chosen are the standing vortex problem, the lid-driven cavity flow, and flow past a circular cylinder.

Tezduyar, T. E.↗

Spacecraft redesign to reduce microphonic response of a VCO component

Reaction wheel vibration was found to induce out of specification sidebands on the carrier frequencies of some spacecraft components containing mechanical voltage control oscillators (VCOs). Concurrent investigations were performed to redesign the VCOs to reduce their response to the wheel vibration, and to design a reaction wheel isolation system to reduce the vibration input to the affected components. Component level tests indicated that both efforts provided viable solutions. The redesigned VCO will be incorporated into future spacecraft in the series, while affected spacecraft already in production will be retrofitted with the reaction wheel isolation system.

Strain, J. C.↗

An Unusual Application of NASTRAN Contour Plotting Capability

A procedure is presented for obtaining contour plots of any physical quantity defined on a number of points of the surface of a structure. Rigid Format 1 of HEAT approach in Cosmic NASTRAN is ALTERED to enable use of contour plotting capability for scalar quantities. The ALTERED DMAP sequence is given. Examples include temperature distribution on the face of a cooled laser mirror and the angle of incidence or a radome surface.

Mittal, S.↗

A New NASTRAN Capability for Data Reduction

A new module, MODB, for the data reduction of NASTRAN results is described. NASTRAN analysis results can be filtered and sorted for minimum/maximum values and the printed output resulting from large NASTRAN runs can be limited based on a number of available user options. The sorting is done on stresses, forces and vector quantities like displacements, velocity, and acceleration. The module can be accessed via DMAP alters to existing rigid formats, and has been used on a large number of statics and dynamics problems resulting in considerable savings in cost, time, and the amount of printing.

Gallo, M.↗