Search NASA⌕ Search

Engineering topics

Mizrahi Rodriguez, Katherine

Publications and source records attributed to Mizrahi Rodriguez, Katherine.

12 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Rational sub-nanometer manipulation of polymer morphology for efficient chemical separations

The ability to control polymer morphology on the sub-nanometer length scale has broad implications for chemical separations. To achieve such control on easily processable systems, this proposal focuses on the synthesis and characterization of polymers containing appended labile moieties that are easily detached by thermolysis or UV irradiation deep within the glassy state. Once liberated, these moieties can diffuse from the polymer matrix as gaseous products, leaving behind templated pathways for selective diffusion and sorption of small molecules. With a specific target of creating polymeric membrane materials with unprecedented diffusion and (ad)sorption characteristics for chemical separations, synthesis of new materials will be complemented with advanced metrologies, simulations, and evaluation of thermodynamic and transport theory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Multi-lab study on the pure-gas permeation of commercial polysulfone (PSf) membranes: Measurement standards and best practices

Gas-separation membranes are a critical industrial component for a low-carbon and energy-efficient future. As a result, many researchers have been testing membrane materials over the past several decades. Unfortunately, almost all membrane-based testing systems are home-built, and there are no widely accepted material standards or testing protocols in the literature, making it challenging to accurately compare experimental results. Further, in this multi-lab study, ten independent laboratories collected high-pressure pure-gas permeation data for H 2 , O 2 , CH 4 , and N 2 in commercial polysulfone (PSf) films. Equipment information, testing procedures, and permeation data from all labs were collected to provide (1) accepted H 2 , O 2 , CH 4 , and N 2 permeability values at 35°C in PSf as a reference standard, (2) statistical analysis of lab-to-lab uncertainties in evaluating permeability, and (3) a list of best practices for sample preparation, equipment set-up, and permeation testing using constant-volume variable-pressure apparatuses. Results summarized in this work provide a reference standard and recommended testing protocols for pure-gas testing of membrane materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Revisiting group contribution theory for estimating fractional free volume of microporous polymer membranes

Fractional free volume (FFV) is a commonly used metric for the development of structure–property relationships for polymer membranes. The most common method to calculate FFV uses Bondi's group contribution method, first introduced in 1964. While updated in 1997, there has not been a significant compilation of new structural motifs since the advent of linear microporous polymers. Here, in this study, we critically examined the assumptions in Bondi's original method and provide four recommendations to streamline and improve the accuracy of calculating van der Waals volume (V W ) for any group. Using these recommendations, we created an updated list of (V W ) values for structural groups commonly present in microporous polymers. The (V W ) and FFV values were then calculated for a database of 123 microporous and high free volume polymers from the literature, showing an average 7% decrease in (V W ) and corresponding increase in FFV by a factor of 24% when compared to prior group contribution correlations in the literature. The significant apparent increase in estimated FFV provides a new perspective to understand and interpret the role of free volume on the separation performance of linear microporous polymers. Additionally, standardization of the group contribution method allows for the direct comparison of FFV values across studies.

42 ENGINEERING↗
DOE OSTI2021

Leveraging Free Volume Manipulation to Improve the Membrane Separation Performance of Amine‐Functionalized PIM‐1

Abstract Gas‐separation polymer membranes display a characteristic permeability–selectivity trade‐off that has limited their industrial use. The most comprehensive approach to improving performance is to devise strategies that simultaneously increase fractional free volume, narrow free volume distribution, and enhance sorption selectivity, but generalizable methods for such approaches are exceedingly rare. Here, we present an in situ crosslinking and solid‐state deprotection method to access previously inaccessible sorption and diffusion characteristics in amine‐functionalized polymers of intrinsic microporosity. Free volume element (FVE) size can be increased while preserving a narrow FVE distribution, enabling below‐upper bound polymers to surpass the H 2 /N 2 , H 2 /CH 4 , and O 2 /N 2 upper bounds and improving CO 2 ‐based selectivities by 200 %. This approach can transform polymers into chemical analogues with improved performance, thereby overcoming traditional permeability–selectivity trade‐offs.

Mizrahi Rodriguez, Katherine↗
DOE OSTI2020

Free volume manipulation of a 6FDA-HAB polyimide using a solid-state protection/deprotection strategy

We report tert-butoxycarbonyl (t-BOC) is a thermally labile moiety that can be used to protect hydroxyl groups on polymers. In this study, t-BOC was appended onto a polyimide consisting of 2,2'-bis-(3,4-dicarboxyphenyl) hexafluoropropane dianhydride (6FDA) and 3,3'-dihydroxy-4,4'-diamino-biphenyl (HAB), after which the polymer was formed into self-standing films. Solid-state thermal treatments were performed to systematically remove t-BOC moieties to alter the physical packing structure and concomitant gas transport properties of the polymer. Despite performing deprotection reactions well below the glass transition temperature of 6FDA-HAB (~300 °C), this free volume manipulation (FVM) approach produced only subtle differences in polymer density, fractional free volume, average free volume element size, and gas transport properties relative to the unprotected polymer. While these findings suggest that thermally removing covalently bound functional groups from polymer films can be used to manipulate free volume and gas transport performance for glassy polymers, more robust polymer systems than linear polyimides are required to preserve the nascent free volume architecture generated from this approach.

36 MATERIALS SCIENCE↗