Engineering topics

Moll, Philip J. W.

Publications and source records attributed to Moll, Philip J. W..

9 records

DOE OSTI2024

Semi-classical origin of the extreme magnetoresistance in PtSn 4

The so-called “extreme magnetoresistance” (XMR) found in few conductors poses interesting conceptual challenges which address needs in technology. In contrast to the more common XMR in semi-metals, PtSn 4 stands out as a rare example of a high carrier density multi-band metal exhibiting XMR, sparking an active debate about its microscopic origin. Here we report a sharp sensitivity of its XMR upon the field angle, with an almost complete collapse only for one specific current and field direction (B//b, I//a). Corroborated by band-structure calculations, we identify a singular open orbit on one of its Fermi surface sheets as the origin of this collapse. This remarkably switchable XMR resolves the puzzle in PtSn 4 as a semi-classical effect of an ultra-pure, compensated carrier metal. It further showcases the importance of Ockham’s razor in uncommon magnetotransport phenomena and demonstrates the remarkable physical properties conventional metals can exhibit given they are superbly clean.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Nonlinear optical diode effect in a magnetic Weyl semimetal

Diode effects are of great interest for both fundamental physics and modern technologies. Electrical diode effects (nonreciprocal transport) have been observed in Weyl systems. Optical diode effects arising from the Weyl fermions have been theoretically considered but not probed experimentally. Here, we report the observation of a nonlinear optical diode effect (NODE) in the magnetic Weyl semimetal CeAlSi, where the magnetization introduces a pronounced directionality in the nonlinear optical second-harmonic generation (SHG). We demonstrate a six-fold change of the measured SHG intensity between opposite propagation directions over a bandwidth exceeding 250 meV. Supported by density-functional theory, we establish the linearly dispersive bands emerging from Weyl nodes as the origin of this broadband effect. We further demonstrate current-induced magnetization switching and thus electrical control of the NODE. Our results advance ongoing research to identify novel nonlinear optical/transport phenomena in magnetic topological materials and further opens new pathways for the unidirectional manipulation of light.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Layered metals as polarized transparent conductors

The quest to improve transparent conductors balances two key goals: increasing electrical conductivity and increasing optical transparency. To improve both simultaneously is hindered by the physical limitation that good metals with high electrical conductivity have large carrier densities that push the plasma edge into the ultra-violet range. Technological solutions reflect this trade-off, achieving the desired transparencies only by reducing the conductor thickness or carrier density at the expense of a lower conductance. Here we demonstrate that highly anisotropic crystalline conductors offer an alternative solution, avoiding this compromise by separating the directions of conduction and transmission. We demonstrate that slabs of the layered oxides Sr 2 RuO 4 and Tl 2 Ba 2 CuO 6+δ are optically transparent even at macroscopic thicknesses >2 μm for c-axis polarized light. Underlying this observation is the fabrication of out-of-plane slabs by focused ion beam milling. This work provides a glimpse into future technologies, such as highly polarized and addressable optical screens.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Ionic Liquid Gating of SrTiO 3 Lamellas Fabricated with a Focused Ion Beam

Here, in this work, we combine two previously incompatible techniques for defining electronic devices: shaping three-dimensional crystals by focused ion beam (FIB), and two-dimensional electrostatic accumulation of charge carriers. The principal challenge for this integration is nanometer-scale surface damage inherent to any FIB-based fabrication. We address this by using a sacrificial protective layer to preserve a selected pristine surface. The test case presented here is accumulation of 2D carriers by ionic liquid gating at the surface of a micron-scale SrTiO 3 lamella. Preservation of surface quality is reflected in superconductivity of the accumulated carriers. This technique opens new avenues for realizing electrostatic charge tuning in materials that are not available as large or exfoliatable single crystals, and for patterning the geometry of the accumulated carriers.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2022

Controlling superconductivity of CeIrIn 5 microstructures by substrate selection

Superconductor/metal interfaces are usually fabricated in heterostructures that join these dissimilar materials. A conceptually different approach has recently exploited the strain sensitivity of heavy-fermion superconductors, selectively transforming regions of the crystal into the metallic state by strain gradients. The strain is generated by differential thermal contraction between the sample and the substrate. Here, we present an improved finite-element model that reliably predicts the superconducting transition temperature in CeIrIn 5 even in complex structures. Different substrates are employed to tailor the strain field into the desired shapes. Using this approach, both highly complex and strained as well as strain-free microstructures are fabricated to validate the model. This enables a high degree of control over the microscopic strain fields and forms the basis for more advanced structuring of superconductors as in Josephson junctions yet also finds natural use cases in any material class in which a modulation of the physical properties on a chip is desirable.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Temperature dependence of quantum oscillations from non-parabolic dispersions

The phase offset of quantum oscillations is commonly used to experimentally diagnose topologically nontrivial Fermi surfaces. This methodology, however, is inconclusive for spin-orbit-coupled metals where π -phase-shifts can also arise from non-topological origins. Here, we show that the linear dispersion in topological metals leads to a T 2 -temperature correction to the oscillation frequency that is absent for parabolic dispersions. We confirm this effect experimentally in the Dirac semi-metal Cd 3 As 2 and the multiband Dirac metal LaRhIn 5 . Both materials match a tuning-parameter-free theoretical prediction, emphasizing their unified origin. For topologically trivial Bi 2 O 2 Se, no frequency shift associated to linear bands is observed as expected. However, the π -phase shift in Bi 2 O 2 Se would lead to a false positive in a Landau-fan plot analysis. Our frequency-focused methodology does not require any input from ab-initio calculations, and hence is promising for identifying correlated topological materials.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Evidence of a coupled electron-phonon liquid in NbGe 2

Whereas electron-phonon scattering relaxes the electron’s momentum in metals, a perpetual exchange of momentum between phonons and electrons may conserve total momentum and lead to a coupled electron-phonon liquid. Such a phase of matter could be a platform for observing electron hydrodynamics. Here we present evidence of an electron-phonon liquid in the transition metal ditetrelide, NbGe 2 , from three different experiments. First, quantum oscillations reveal an enhanced quasiparticle mass, which is unexpected in NbGe 2 with weak electron-electron correlations, hence pointing at electron-phonon interactions. Second, resistivity measurements exhibit a discrepancy between the experimental data and standard Fermi liquid calculations. Third, Raman scattering shows anomalous temperature dependences of the phonon linewidths that fit an empirical model based on phonon-electron coupling. We discuss structural factors, such as chiral symmetry, short metallic bonds, and a low-symmetry coordination environment as potential design principles for materials with coupled electron-phonon liquid.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2021

Scanning SQUID microscopy in a cryogen-free dilution refrigerator

We report a scanning superconducting quantum interference device (SQUID) microscope in a cryogen-free dilution refrigerator with a base temperature at the sample stage of at least 30 mK. The microscope is rigidly mounted to the mixing chamber plate to optimize thermal anchoring of the sample. The microscope housing fits into the bore of a superconducting vector magnet, and our design accommodates a large number of wires connecting the sample and sensor. Through a combination of vibration isolation in the cryostat and a rigid microscope housing, we achieve relative vibrations between the SQUID and the sample that allow us to image with micrometer resolution over a 150 μm range while the sample stage temperature remains at base temperature. To demonstrate the capabilities of our system, we show images acquired simultaneously of the static magnetic field, magnetic susceptibility, and magnetic fields produced by a current above a superconducting micrometer-scale device.

47 OTHER INSTRUMENTATION↗

DOE OSTI2021

Sondheimer oscillations as a probe of non-ohmic flow in WP 2 crystals

As conductors in electronic applications shrink, microscopic conduction processes lead to strong deviations from Ohm’s law. Depending on the length scales of momentum conserving (l MC ) and relaxing (l MR ) electron scattering, and the device size (d), current flows may shift from ohmic to ballistic to hydrodynamic regimes. So far, an in situ methodology to obtain these parameters within a micro/nanodevice is critically lacking. In this context, we exploit Sondheimer oscillations, semi-classical magnetoresistance oscillations due to helical electronic motion, as a method to obtain l MR even when l MR $\gg$ d. We extract l MR from the Sondheimer amplitude in WP 2 , at temperatures up to T ~ 40 K, a range most relevant for hydrodynamic transport phenomena. Our data on μm-sized devices are in excellent agreement with experimental reports of the bulk l MR and confirm that WP 2 can be microfabricated without degradation. These results conclusively establish Sondheimer oscillations as a quantitative probe of l MR in micro-devices.

36 MATERIALS SCIENCE↗