Engineering topics

Monk, Kevin J.

Publications and source records attributed to Monk, Kevin J..

11 records

NASA NTRS2020

ACAS-Xu Run 5 HITL (June 2019) SC-228 WG 1.3 Results Outbrief

This presentation provides an overview of a recently completed human-in-the-loop simulation, conducted as part of the Unmanned Aircraft Systems (UAS) Integration in the National Airspace System (NAS) Project. This study examined how to present resolution advisories (RAs) issued by Airborne Collision Avoidance System (ACAS) Xu, which can be in the vertical dimension, the horizontal dimension, or both (i.e., â€œblendedâ€). The study varied the location of the ACAS Xu traffic information - it was either presented within an 'integrated' display or a 'standalone' display, where the traffic information was separated from the vehicle control interfaces and navigational information. Results revealed generally positive feedback on the visual and aural presentation of RAs, with special considerations and performance implications noted throughout.

Monk, Kevin J.↗

NASA NTRS2020

Unmanned Aircraft Systems (UAS) Integration in the National Airspace System (NAS) Project: Low SWaP HITL 2, SC-228 Outbrief, EO/IR & ATAR Breakout

This presentation provides an overview of a recently completed human-in-the-loop simulation, conducted as part of the Unmanned Aircraft Systems (UAS) Integration in the National Airspace System (NAS) Project. This study explored the differential effects of four low size, weight, and power radar declaration ranges on pilot and system performance. Pilots were to avoid DAA well clear against cooperative and non-cooperative aircraft under 1.5, 2, 2.5, and 3 nautical mile non-cooperative detection ranges. Results revealed that pilot performance was primarily influenced by warning-level alert duration, with sufficient alerting time being most prevalent at 2.5 nautical miles and above.

Monk, Kevin J.↗

NASA NTRS2019

Unmanned Aircraft Systems (UAS) Integration in the National Airspace System (NAS) Project: ACAS-Xu Run 5 Human-In-The-Loop Sim SC-147 Results Outbrief

This presentation provides an overview of a recently completed human-in-the-loop simulation, conducted as part of the Unmanned Aircraft Systems (UAS) Integration in the National Airspace System (NAS) Project. This study examined how to present resolution advisories (RAs) issued by Airborne Collision Avoidance System (ACAS) Xu, which can be in the vertical dimension, the horizontal dimension, or both (i.e., "blended"). The study varied the location of the ACAS Xu traffic information - it was either presented within an 'integrated' display or a 'standalone' display, where the traffic information was separated from the vehicle control interfaces and navigational information. Results revealed generally positive feedback on the visual and aural presentation of RAs, with special considerations and performance implications noted throughout.

Monk, Kevin J.↗

NASA NTRS2019

A Detect and Avoid System in the Context of Multiple-Unmanned Aircraft Systems Operations

NASA's Unmanned Aircraft Systems Integration into the National Airspace System (UAS in the NAS) project examines the technical barriers associated with the operation of UAS in civil airspace. For UAS, the removal of the pilot from onboard the aircraft has eliminated the ability of the ground-based pilot in command (PIC) to use out-the-window visual information to make judgements about a potential threat of a loss of well clear with another aircraft. NASA's Phase 1 research supported the development of a Detect and Avoid (DAA) system that supports the ground-based pilot's ability to detect potential traffic conflicts and determine a resolution maneuver, but existing display/alerting requirements did not account for multiple UAS control (1:N). Demands for increased scalability of UAS in the NAS operations are expected to create a need for simultaneous control of UAs, and thus, a new DAA HMI design will likely be necessary. Previous research, however, has found performance degradations as the number of vehicles under operator control has increased. The purpose of the current human-in-the-loop (HITL) simulation was to examine the viability of 1:N operations with the Phase 1 DAA alerting and guidance. Sixteen UAS pilots flew three scenarios with varying number of UAs under their control (1:1, 1:3, 1:5). In addition to their supervisory and sensor mission responsibilities, pilots were to utilize the DAA system to remain DAA well clear (DWC) during scripted conflicts of mixed severity. Measured response times, separation performance, mission task data, and subjective feedback were collected to assess how the multi-UAS control configuration impacted pilots' ability to maintain DAA well clear and perform the mission tasks. Overall, the DAA system proved surprisingly adaptive to multi-UAS control for preventing losses of DAA well clear (LoDWC). The findings suggest that, while multi-UAS operators are able to maintain safe separation (DWC) from other traffic, their ability to efficiently perform missions drastically decreases with their number of controlled vehicles. Pilot feedback indicated that, for this context, the use of automation support tools for completing and managing mission tasks would be appropriate and desired, especially for ensuring efficient use of assets. Finally, human-machine interface (HMI) design considerations for multi-UAS operations are discussed.

Monk, Kevin J.↗

NASA NTRS2019

Unmanned Aircraft Systems (UAS) Integration in the National Airspace System (NAS) Project

Phase 1 of the UAS-NAS (Unmanned Aircraft Systems-National Airspace System) project focused on MOPS (Minimum Operational Performance Standards) development for large UAS transitioning through Class D, E, and G airspace. Phase 2 activities are currently focused on extended UAS operations in Class D, E, and G airspace, as well as sensors and architectures that will enable DAA (Detect and Avoid) equipment to be installed on a wider range of UAS. Encounters with non-cooperative intruders in low altitude airspace under 10,000 feet will be explored for UAS with a low Size, Weight, and Power (SWaP) radar. New sensors for detecting non-cooperative intruder aircraft will have a more limited detection range and field of regard; therefore, the analysis of non-cooperative encounter geometries may help in developing the requirements for an onboard low SWaP radar (and electro-optical sensor). The current simulation, led by HSI (Human Systems Integration Division at NASA Ames Research Center) as part of the DAA subproject, will support efforts toward developing a modified DAA Well Clear (DWC) definition that would be more appropriate for UAS equipped with limited surveillance and aircraft performance capabilities compared to the Phase 1 DAA system. The findings will inform Phase 2 display requirements for alternative surveillance use cases.

Collision Avoidance↗

NASA NTRS2018

Utility of Visual and Auditory Warning Alerting for Traffic Avoidance During UAS Operations

This presentation covers the results of a human-in-the-loop simulation that examined the effect of caution versus warning-level alerting in the context of Unmanned Aircraft System (UAS) operations in civil airspace. Minimum Operational Performance Standards (MOPS) are currently being developed by RTCA Special Committee 228 for UAS Detect-and-Avoid (DAA) systems. Input from subject matter experts and multiple research studies have informed display requirements for DAA systems aimed at supporting timely and appropriate pilot responses to collision hazards. DAA alerting is designed to inform pilots of potential threats to DAA "well clear"; the two highest alert levels - caution and warning - indicate how soon pilot action is required and whether there is adequate time to coordinate with the air traffic controller (ATC). Additional empirical support is needed to clarify the extent to which warning-level alerting impacts DAA task performance. The present study explores the differential effects of the auditory and visual cues provided by the DAA Warning alert, and performance implications compared to caution-only alerting are discussed.

detect and avoid↗

NASA NTRS2018

An Exploratory Evaluation of UAS Detect and Avoid Operations in the Terminal Environment

New technical standards for Unmanned Aircraft Systems (UAS) detect and avoid (DAA) systems mark recent progress toward realizing the goal of full integration of UAS into the National Airspace System (NAS). The DAA system is intended to provide a means of compliance with operating regulations that required pilots on board manned aircraft to remain "well clear" of other aircraft which is accomplished through out-the-window visual acquisition of other aircraft and application of a subjective judgment of safe separation. The requirements for the DAA system, including the specification of a DAA well clear threshold as well as functional requirements for detecting, tracking, alerting and guidance processing, and displays, are specified in DO-365, Minimum Operational Performance Standards (MOPS) for DAA Systems developed within RTCA (Radio Technical Commission for Aeronautics) Special Committee 228 (SC-228). Intended as the first in a series of phased versions, these requirements are frequently referred to as the "Phase 1" DAA system. The Phase 1 DAA system is limited for use by aircraft transitioning to and from Class A or special use airspace, through Class D, E, and G airspace. In particular, the Phase 1 DAA MOPS are not intended for terminal airspace operations, a critical gap for enabling a full range of UAS operations. The application of the Phase 1 DAA system and DAA well clear threshold within the terminal area is predicted to result in a high number of unnecessary alerts when the UAS is safely separated from other traffic. The goal of the present study was to examine pilot performance and operational issues related to the operation of the Phase 1 DAA system in a terminal area. This experiment was intended as an exploratory study that would be used to inform the development of a new terminal area-specific DAA well clear definition, and associated alerting and guidance requirements. The two main objectives of this study were to: 1) characterize pilot behavior in the terminal environment with the Phase 1 DAA system, and 2) investigate the effect of modifications to the Phase 1 DAA alerting and guidance structure. In particular, the authors were interested in determining whether the removal of specific alerting and guidance levels, without changing the DAA well clear definition or alerting thresholds, would impact pilot performance while conducting terminal operations. The results indicate that the Phase 1 well clear definition and alerting and guidance resulted in frequent alerting that degraded pilots' ability to discriminate between encounters where another aircraft was safely separated versus when a maneuver was necessary. The resulting impact on pilot performance was slower response times and higher frequency and severity of losses of DAA well clear compared to those observed for experiments examining pilot performance in the en route environment. There was no significant effect of alerting and guidance display configuration on pilot performance.

terminal area↗

NASA NTRS2018

Warning Alert HITL Experiment Results

Minimum Operational Performance Standards (MOPS) are being developed to support the integration of Unmanned Aircraft Systems (UAS) in the National Airspace (NAS). Input from subject matter experts and multiple research studies have informed display requirements for Detect-and-Avoid (DAA) systems aimed at supporting timely and appropriate pilot responses to collision hazards. Phase 1 DAA MOPS alerting is designed to inform pilots if an avoidance maneuver is necessary; the two highest alert levels - caution and warning - indicate how soon pilot action is required and whether there is adequate time to coordinate with the air traffic controller (ATC). Additional empirical support is needed to clarify the extent to which warning-level alerting impacts DAA task performance. The present study explores the differential effects of the auditory and visual cues provided by the DAA Warning alert, and performance implications compared to caution-only alerting are discussed.

alerting↗

NASA NTRS2017

Maintain and Regain Well Clear: Maneuver Guidance Designs for Pilots Performing the Detect-and-Avoid Task

In order to support the future expansion and integration of Unmanned Aircraft Systems (UAS), ongoing research efforts have sought to produce findings that inform the minimum display information elements required for acceptable UAS pilot response times and traffic avoidance. Previous simulations have revealed performance benefits associated with DAA displays containing predictive information and suggestive maneuver guidance tools in the form of banding. The present study investigated the impact of various maneuver guidance display configurations on detect-and-avoid (DAA) task performance in a simulated airspace environment. UAS pilots ability to maintain DAA well clear was compared between displays with either the presence or absence of green DAA bands, which indicated conflict-free flight regions. Additional display comparisons assessed pilots ability to regain DAA well clear with two different guidance presentations designed to aid in DAA well clear recovery during critical encounters. Performance implications and display considerations for future UAS DAA systems are discussed.

user interface design↗

NASA NTRS2017

Maintain and Regain Well Clear: Maneuver Guidance Designs for Pilots Performing the Detect-and-Avoid Task

unmanned aircraft systems (UAS)↗

NASA NTRS2016

UAS Pilot Evaluations of Suggestive Guidance on Detect-and-Avoid Displays

Minimum display requirements for Detect-and-Avoid (DAA) systems are being developed in order to support the expansion of Unmanned Aircraft Systems (UAS) into the National Airspace System (NAS). The present study examines UAS pilots subjective assessments of four DAA display configurations with varying forms of maneuver guidance. For each configuration, pilots rated the intuitiveness of the display and how well it supported their ability to perform the DAA task. Responses revealed a clear preference for the DAA displays that presented suggestive maneuver guidance in the form of banding compared to an Information Only display, which lacked any maneuver guidance. Implications on DAA display requirements, as well as the relation between the subjective evaluations and the objective performance data from previous studies are discussed.

unmanned aircraft systems↗