Engineering topics

Monson, Daryl J.

Publications and source records attributed to Monson, Daryl J..

4 records

NASA NTRS1993

Boundary-layer transition and global skin friction measurement with an oil-fringe imaging technique

A new oil-fringe imaging system skin friction (FISF) technique to measure skin friction on wind tunnel models is presented. In the method used to demonstrate the technique, lines of oil are applied on surfaces that connect the intended sets of measurement points, and then a wind tunnel is run so that the oil thins and forms interference fringes that are spaced in proportion to local skin friction. After a run the fringe spacings are imaged with a CCD-array digital camera and measured on a computer. Skin friction and transition measurements on a two-dimensional wing are presented and compared with computational predictions.

Monson, Daryl J.↗

NASA NTRS1993

Boundary-layer transition and global skin friction measurement with an oil-fringe imaging technique

A new oil-fringe imaging fkin friction (FISF) technique to measure skin friction on wind tunnel models is presented. In the method used to demonstrate the technique, lines of oil are applied on surfaces that connect the intended sets of measurement points, and then a wind tunnel is run so that the oil thins and forms interference fringes that are spaced proportional to local skin friction. After a run the fringe spacings are imaged with a CCD-array digital camera and measured on a computer. Skin friction and transition measurements on a two-dimensional wing are presented and compared with computational predictions.

Monson, Daryl J.↗

NASA NTRS1992

Computed And Measured Flow In A Turnaround Duct

Report presents theoretical and experimental study of subsonic flow of air in 180 degree-turnaround duct of rectangular cross section. Purpose of study to conduct partial simulation of conditions similar to those in axisymmetric duct of Space Shuttle main engine. Part of continuing effort to develop capability to simulate complicated turbulent internal flows with large curvatures like those in rocket engines and turbomachinery.

Monson, Daryl J.↗

NASA NTRS1989

Comparison of LDV measurements and Navier-Stokes solutions in a two-dimensional 180-degree turn-around duct

Results from an experimental and numerical investigation of turbulent subsonic flow inside a two-dimensional, strongly curved, 180 deg turn-around duct are presented. Data measured with a two-component, two-color laser Doppler velocimeter include profiles of mean axial velocity and local flow angle. Static pressure distributions are also measured. Results are obtained at a Mach number of 0.1, and at Reynolds numbers of 100,000 and a million based on channel height. Numerical calculations are performed using the incompressible Navier-Stokes equations with a Prandtl mixing length zero-equation turbulence model modified for internal flows. Theory and experiment are compared to evaluate the ability of the turbulence model to predict this class of internal flows with strong curvature.

Monson, Daryl J.↗