Engineering topics

Montgomery, Rose [ORNL] (ORCID:0000000286038936)

Publications and source records attributed to Montgomery, Rose [ORNL] (ORCID:0000000286038936).

3 records

DOE OSTI2025

Developing New Fuels for High Performance Research Reactors

The National Nuclear Security Administration (NNSA) Material Management and Minimization (M3) program works globally to minimize the civilian use of highly enriched uranium (HEU), a weapon-usable nuclear material. Supporting this effort, M3’s Office of Reactor Conversion and Uranium Supply is developing new fuels capable of converting research reactors from HEU fuel to high-assay low-enriched uranium (HALEU) fuel. Some of the remaining research and test reactors (RTRs) operating on HEU today have unique designs, fuel configurations, and demanding performance requirements that cannot be met with an existing regulatory-approved low-enriched uranium (LEU) fuel. M3, DOE’s national laboratories, and other industry partners are qualifying new high-density LEU fuels to convert these RTRs while maintaining their unique capabilities supporting a wide variety of science and technology research in areas such as medicine, industry, defense, education, and training. Current efforts are focused on two options for the remaining US high-performance research reactor conversions: a monolithic uranium 10wt% molybdenum (U-10Mo) fuel form and a dispersion uranium silicide fuel form. This paper reviews the history and status of M3’s fuel qualification efforts for the U-10Mo LEU fuel form.

Montgomery, Rose [ORNL] (ORCID:0000000286038936)↗

DOE OSTI2025

Hydride Reprecipitation in Prototypical 17x17 PWR Fuel Rods after Simulated Vacuum Drying Conditions

Light water reactor (LWR) fuel rod cladding picks up hydrogen as it oxidizes in reactor. Once the hydrogen concentration exceeds the solubility limit, zirconium hydride platelets precipitate, generally in the circumferential direction. In preparation for dry storage, elevated temperatures can dissolve some of the circumferential hydrides, which during cooling can then reprecipitate in a direction perpendicular to the hoop stress (radially). From 2019 to 2024, ORNL published a series of reports that included metallographic observations of cladding after a thermal transient to 400°C followed by slow cooling. The simulated dry storage process was performed on three full-length 17x17 PWR fuel rods at their as-discharged rod internal pressure. There were two important observations from the metallographic examinations of these heat-treated rods: (1) the propensity for hydride reorientation is strongly influenced by nearby as-discharged precipitated hydrides, (2) the radial hydrides observed near the cladding inner diameter were often associated with cracks in the pellet. Subsequent modeling using the BISON fuel performance code that considered the effects of pellet cracks and pellet-cladding bonding observed in high-burnup fuel support the conclusion that pellet cracks enhance the local hoop stress in the cladding creating preferential sites for hydride reorientation, and that the influence of the pellet cannot be ignored in accurate fuel rod performance predictions.

Montgomery, Rose [ORNL] (ORCID:0000000286038936)↗

DOE OSTI2025

Considerations for Thermal Annealing of Zr-Alloy Cladding During Dry Storage

In January 2025, the U.S. Department of Energy (DOE) sponsored a technical workshop with fuel vendors that provided a forum for increased collaboration on backend fuel cycle research. The workshop reviewed observations of thermal annealing of irradiated zirconium alloys in simulated dry storage conditions and discussed implications to the industry’s interest in reducing wet storage to optimize operational flexibility and the expected trend of increasing discharge burnup (and decay heats), which could lead to an increase in dry storage temperatures. One approach to accommodate increased decay heats in dry storage is to increase the regulatory temperature limit during dry storage, which is now 400°C. However, this could lead to thermal annealing of the cladding, which will tend to increase creep rates, creep strains, and ductility while decreasing yield strength. These considerations are compounded by bonding between the pellet and cladding at high burnup, which results in the pellet carrying more load during fuel rod deformations, especially in bending, which is the dominant deformation phenomenon in canister drop analyses. Because the U.S. Nuclear Regulatory Commission (NRC) recommends yield strength as a primary failure criterion for accident analyses in storage and transportation, particularly for canister drop scenarios, the purpose of the workshop was to develop options for alternative failure criterion that could replace yield strength in canister drop analyses. Topics discussed were (1) the regulatory framework, (2) the effect of thermal annealing on microhardness and tensile properties of cladding materials, (3) the effect of thermal annealing on fuel rod failure during bending, bending fatigue, and pinch loading, and (4) an alternative failure criterion for canister drop analyses. This paper provides a summary of the key discussions and outcomes of the workshop

Cantonwine, Paul [ORNL] (ORCID:0009000522247033)↗