Search NASA⌕ Search

Engineering topics

Moon, Jaeyun

Publications and source records attributed to Moon, Jaeyun.

Metal-organic-framework and walnut shell biochar composites for lead and hexavalent chromium removal from aqueous environments

Extensive research in recent years has explored the realm of porous carbon composites for various applications, including electrochemistry, structural materials, environmental remediation, and more. In particular, the fabrication of porous carbon composites using a metal-organic framework (MOF) and biochar (BC) for aqueous remediation is a fairly new avenue of research. In this study, a MOF-BC composite was synthesized with unmodified and chemically modified BCs using solvothermal synthesis. The composites were used as adsorbents to remediate heavy metals, such as lead (II) and chromium (VI), from aqueous environments. Here, it was verified that the MOF was homogeneously deposited onto the BC's surface using various material characterization techniques. Lead and chromium adsorption studies revealed a high adsorption capacity with greater than 99% removal for lead and ∼65% for chromium, respectively. Impressively, for lead, the highest observed experimental adsorption capacity of the MOF-chemically modified BC composite was 535 mg/g, compared to 240 mg/g for pristine BC. Meanwhile, the adsorption capacity of the same MOF-BC composite for chromium ions was low at 18 mg/g, compared to 80 mg/g for the chemically modified BC. The MOF-BC had a rapid adsorption rate, achieving equilibrium at only 150 min of reaction time for lead ions. MOF-BCs have higher adsorption for cationic lead through physisorption and ion-exchange mechanisms, whereas, for anionic chromium, removal is dominated only by physisorption mechanisms. The outcomes and methodological developments attained in this study offer a novel and compelling approach for synthesizing MOF-BC composites for aqueous remediation applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Novel alkali intercalated and acid-exfoliated biochars with enhanced surface areas for contaminant adsorption applications

Cost-effective and eco-friendly adsorbents are essential in environmental engineering and biochar is a promising material from the perspective. A novel and efficient surface modification approach involving alkali intercalation and acid exfoliation was designed in this study to enhance the physicochemical properties of biochar. Here, the alkali intercalation process utilizes potassium hydroxide (KOH), while acid exfoliation involves varying HNO 3 , H 2 SO 4 , and H 3 PO 4 concentrations. A simple two-stage pyrolysis process was employed to facilitate the intercalation-exfoliation modification. The modified biochars were characterized using BET, SEM, XRD, etc., to understand physicochemical properties. To quantify the effectiveness of the modifications, adsorption of malachite green dye as a model moiety was investigated. Dye removal sorption rates exceeding 99 % were recorded in the case of the biochars modified through a two-step process using KOH and 0.1MH 3 PO 4 . Specifically, the highest contaminant removal of 99.9 % was recorded when 60 mg of the KOH-0.1MH 3 PO 4 biochar was employed, which is significantly higher than unmodified biochar’s 45.41 % removal at a higher dosage of 100 mg. Moreover, the adsorption kinetics revealed that all the modified biochars attained the maximum removal concentrations (~99 % removal) in a mere 300 min, indicating a tenfold improvement in adsorption rate from unmodified biochar's requirement of over 5000 min. The results achieved through this study provide a cost-effective, fast, and environment-friendly technology for enhancing the adsorption characteristics and performance of biochars toward contaminant removal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Normal mode description of phases of matter: Application to heat capacity

Understanding thermodynamics in liquids at the atomic level is challenging because of strong atomic interactions and lack of spatial symmetry. Recent prior theoretical works have focused on describing heat capacity of liquids in terms of phonon-like excitations but often rely on fitting factors and assumptions. In this work, we propose characterizing various phases in terms of instantaneous normal modes (INMs) of structural snapshots from molecular dynamics simulations of single-element systems over wide ranges of temperature and pressure. We use the INMs to build a mode-level microscopic description of heat capacity and demonstrate that heat capacity of liquids can be described by a combination of both solidlike and gaslike degrees of freedom, leading to a more unified framework to fundamentally describe heat capacity of all three phases of matter: solid, liquid, and gas. Published by the American Physical Society 2024

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic dynamics in fluids: Normal mode analysis revisited

Developing microscopic understanding of the thermal properties of liquids is challenging due to their strong dynamic disorder, which prevents characterization of the atomic degrees of freedom. There have been significant research interests in the past few decades to extend the normal mode analysis for solids to instantaneous structures of liquids. However, the nature of normal modes that arise from these unstable structures is still elusive. Here, in this paper, we explore the instantaneous eigenmodes of dynamical matrices of various Lennard-Jones argon liquid and gas systems at high temperatures and show that the normal modes can be interpreted as an interpolation of T →∞ (gas) and T=0 (solid) mode descriptions. We find that normal modes become increasingly collisional and translational, recovering atomistic gaslike behavior rather than vibrational with increase in temperature, suggesting that normal modes in liquids may be described by both solidlike and gaslike modes.

74 ATOMIC AND MOLECULAR PHYSICS↗

Biochar Nanocomposite as an Inexpensive and Highly Efficient Carbonaceous Adsorbent for Hexavalent Chromium Removal

Biochar is commonly used for soil amendment, due to its excellent water-holding capacity. The Cr(VI) contamination of water is a current environmental issue in industrial regions. Here, we evaluated the effects of two-step modifications on boosting biochar’s performance in terms of the removal of aqueous hexavalent chromium (Cr(VI)), along with investigating the alterations to its surface properties. The first modification step was heat treatment under air at 300 °C, producing hydrophilic biochar (HBC). The resulting HBC was then impregnated with zero-valent iron nanoparticles (nZVI), creating an HBC/nZVI composite, adding a chemical reduction capability to the physical sorption mechanism. Unmodified biochar (BC), HBC, and HBC/nZVI were characterized for their physicochemical properties, including surface morphology and elemental composition, by SEM/EDS, while functional groups were ascertained by FTIR and surface charge by zeta potential. Cr(VI) removal kinetic studies revealed the four-time greater sorption capacity of HBC than BC. Although unmodified BC showed faster initial Cr(VI) uptake, it rapidly worsened and started desorption. After nZVI impregnation, the Cr(VI) removal rate of HBC increased by a factor of 10. FTIR analysis of biochars after Cr(VI) adsorption showed the presence of Cr(III) oxide only on the used HBC/nZVI and demonstrated that the carbonyl and carboxyl groups were the main groups involved in Cr(VI) sorption. Modified biochars could be considered an economical substitute for conventional methods.

36 MATERIALS SCIENCE↗

Transient nature of fast relaxation in metallic glass

Metallic glasses exhibit fast mechanical relaxations at temperatures well below the glass transition, one of which shows little variation with temperature known as nearly constant loss (NCL). Despite the important implications of this phenomenon to deformation, the origin of the relaxation is unclear. Through molecular dynamics simulations of a model metallic glass, Cu 64.5 Zr 35.5 , we implement molecular dynamics dynamical mechanical spectroscopy (MD-DMS) with system stress decomposed into atomic-level stresses to identify the group of atoms responsible for NCL. This work demonstrates that NCL relaxation is due to transient groups of atoms that revert to the typical atomic-level viscoelastic behavior over picosecond timescales. They are homogenously distributed throughout the glass and have no outstanding features, rather than having defect-like local structure as previously reported.

36 MATERIALS SCIENCE↗

Enhancing elastic properties of single element amorphous solids through long-range interactions

Elastic properties of amorphous solids remain a topic of intense interest due to their important roles in a wide range of applications. Prior works have focused on short-range, local structural features, such as number density and coordination number, to elucidate the underlying mechanism of elastic moduli in glasses. Here, we report strong correlations among the spatial extension of the interatomic potential, elastic moduli, and the coherence lengths of the medium-range structural order through molecular dynamics simulations for single element glasses. Our findings demonstrate an unconventional design principle to engineer elastic properties by extending the medium-range order and provide insights into the microscopic origin of elastic properties in amorphous solids.

36 MATERIALS SCIENCE↗

Examining normal modes as fundamental heat carriers in amorphous solids: The case of amorphous silicon

Normal mode decomposition of atomic vibrations has been used to provide microscopic understanding of thermal transport in amorphous solids for decades. In normal mode methods, it is naturally assumed that atoms vibrate around their equilibrium positions, and that individual normal modes are the fundamental vibrational excitations transporting heat. With the abundance of predictions from normal mode methods and experimental measurements now available, we carefully analyze these calculations in amorphous silicon, a model amorphous solid. We find a number of discrepancies, suggesting that treating individual normal modes as fundamental heat carriers may not be accurate in amorphous solids. Furthermore, our classical and ab initio molecular dynamics simulations of amorphous silicon demonstrate a large degree of atomic diffusion, especially at high temperatures, leading to the conclusion that thermal transport in amorphous solids could be better described starting from the perspectives of liquid physics rather than from crystalline solids.

36 MATERIALS SCIENCE↗

High frequency atomic tunneling yields ultralow and glass-like thermal conductivity in chalcogenide single crystals

Crystalline solids exhibiting glass-like thermal conductivity have attracted substantial attention both for fundamental interest and applications such as thermoelectrics. In most crystals, the competition of phonon scattering by anharmonic interactions and crystalline imperfections leads to a non-monotonic trend of thermal conductivity with temperature. Defect-free crystals that exhibit the glassy trend of low thermal conductivity with a monotonic increase with temperature are desirable because they are intrinsically thermally insulating while retaining useful properties of perfect crystals. However, this behavior is rare, and its microscopic origin remains unclear. Here, we report the observation of ultralow and glass-like thermal conductivity in a hexagonal perovskite chalcogenide single crystal, BaTiS 3 , despite its highly symmetric and simple primitive cell. Elastic and inelastic scattering measurements reveal the quantum mechanical origin of this unusual trend. A two-level atomic tunneling system exists in a shallow double-well potential of the Ti atom and is of sufficiently high frequency to scatter heat-carrying phonons up to room temperature. While atomic tunneling has been invoked to explain the low-temperature thermal conductivity of solids for decades, our study establishes the presence of sub-THz frequency tunneling systems even in high-quality, electrically insulating single crystals, leading to anomalous transport properties well above cryogenic temperatures.

36 MATERIALS SCIENCE↗

Development of the Intelligent, Preventive Infrared (IR) Inspection System Housed in Hybrid Robotic Platforms

Robots and robotic systems that are designed for inspection, environmental study, and health and safety aid are becoming an increasing necessity. However, there is a number of challenges that accompany robots that are designed for these specific applications. These challenges include: navigating compact, enclosed spaces, travelling over multiple terrains and large obstacles, using the proper sensing and detection methods to assess an environment, and the use of lightweight and durable materials. The robotic platforms currently in development look at all of these challenges and attempt to overcome them. These designs specific use of hybrid robotic platforms, or platform that utilizes soft and rigid materials, allows for a more flexible platform and makes environments more navigable. To further improve the navigation of the platforms and environmental assessment, a novel infrared detection system is housed in the platforms to create a robot that can be used for the applications listed above and more. Objectives: Further develop two types of robotic platforms that utilize additive manufacturing, soft materials, and rigid materials. Continue the development of an intelligent and inhibitory infrared detection system based on an artificial intelligence (AI) algorithm. Continued study and fabrication of active soft materials designed for both sensing and actuation in hybrid robotic systems. Improve additive manufacturing fabrication to design rigid and semi-rigid components for hybrid robotic platforms. Transformable Wheel Robotic Platform: The chassis, wheels, tires and inspection system housing use different additive manufacturing techniques for fabrication. Continued work with additive manufacturing has lead to studies in metal-based printing and modular design and manufacturing. The new platform design with integrated electrical component printed. This will allow integration of the sensor housing onto the platform. Electrical components are being tested for battery life and performance. To improve this performance, such as integration of Lithium Polymer (LiPo) batteries. Snake Robotic Platform: The main focus of the development has centered around liquid-based soft actuators. That act on the principles of electrostatic and hydraulic actuation. A liquid dielectric sits between two compliant electrodes, contained by a flexible polymer shell. The electrodes and film gradually collapse toward each other from one corner of the electrode to the other. When the electrodes and film close together, a majority of the fluid is pushed into the area not covered by an electrode. A thin layer of the liquid dielectric remains between the electrode. The actuators will be stacked to cause large displacement, and move the linkages. The chassis of this platform uses purely additively manufactured linkages. Intelligent, Preventive IR Inspection System: Development of the AI for the system has lead to using a Scikit-Learn which assists in creating predictive models based on Regression, clustering, classification etc. To improve the infrared thermometry for low emissivity sources, work on the fabrication of a tandem photoconductive infrared thermometer was a main focus. Distance-Voltage-Temperature response data has been collected in the range of 7 cm - 100 cm and 200-400 deg. C. Modifications were made to the existing test bench to have a better control over the data. Automated data collection was realized using a Python code and an Arduino controlled stepper motor to increase the sample rate. A protective enclosure has been built around the setup to minimize the effect of the environment on the measurements. To better predict temperature, different AI models are being optimized. The regression model, LARS showed a high accuracy but had convergence issues and only works for the current test set-up. Results: The Transformable Wheel Robot has developed into a more flexible and modular platform. With the improvements to the current work, effort on the tire or soft gripper design been a large focus. The soft grippers will be interchange able to allow for increased performance in identified terrain types. The development of the liquid-based actuators allows the snake robotic platform to achieve the goals of being flexible and able to navigate confined spaces. However, there is room for improvement. Optimization work is currently being done in COMSOL Multiphysics. With the current IR system set-up the LARS model perfectly predicts the data; however, considering the mobility aspect of the project other models will allow for an optimized system. Testing of other model types is currently being done.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Thermal acoustic excitations with atomic-scale wavelengths in amorphous silicon

The vibrational properties of glasses remain a topic of intense interest due to several unresolved puzzles, including the origin of the Boson peak and the mechanisms of thermal transport. Inelastic scattering measurements have revealed that amorphous solids support collective acoustic excitations with low THz frequencies despite the atomic disorder, but these frequencies are well below most of the thermal vibrational spectrum. Here, we report the observation of acoustic excitations with frequencies up to 10 THz in amorphous silicon. The excitations have atomic-scale wavelengths as short as 6 Å and exist well into the thermal vibrational frequencies. Simulations indicate that these high-frequency waves are supported due to the high group velocity and monatomic composition of a-Si, suggesting that other glasses with these characteristics may also exhibit such excitations. Furthermore, our findings demonstrate that a substantial portion of thermal vibrational modes in amorphous materials can still be described as a phonon gas despite the lack of atomic order.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Regents of the University of California (Oakland, CA)

Methods, systems, and devices are disclosed for fabricating and implementing optically absorbing coatings. In one aspect, an optically selective coating includes a substrate formed of a solar energy absorbing material, and a nanostructure material formed over the substrate as a coating capable of absorbing solar energy in a selected spectrum and reflecting the solar energy in another selected spectrum. A concentrating solar power (CSP) system includes heat transfer fluids (HTFs); thermal energy storage system (TES); and solar receivers in communication with HTFs and including a light absorbing coating layer based on cobalt oxide nanoparticles.

Jin, Sungho↗

Enhanced removal of aqueous hexavalent chromium (Cr(VI)) as a nuclear industry water contaminant by a polymer-modified activated carbon - 18354

Cr (VI) is produced through industrial processes including nuclear activities. It is one of the highly toxic pollutants defined by US EPA, classified as a know human carcinogen. Some of the health effects caused by Cr (VI) exposure are: severe skin and eye damage, nose, throat and lung irritations, damage to the mucous membranes results in ulcers. At Hanford and Savannah River nuclear sites in the United States, the chromium concentration vary from 20 - 30,000 μg/L in water. The maximum level of Cr(VI) for drinking water has been regulated by California Environmental Protection Agency (Cal/EPA) at 0.01 mg/L. Activated carbon (AC) is a widely-used adsorbent for water treatment. However, AC has a limited selectivity for chromium species. Thiol compounds (R-S-H) have also been reported to reduce Cr(VI) to Cr(III) which is harmless. To enhance the removal efficiency of chromium, polysulfide rubber polymer containing thiol was synthesized and coated on Activated Carbon (AC-PSR). Polymer coating on activated carbon enhances its sorption capacity by increasing the chromium binding sites. Conclusions: Polysulfide rubber polymer successfully coated on granular activated carbon. AC-PSR provided greater Cr(VI) removal capacity, due to the reduction of Cr(VI) to Cr(III) by thiol compounds in PSR, as well as physical adsorption onto AC. Future Work: Investigating intra-particle diffusion mechanism of of Cr(VI) in AC-PSR. Evaluating reusability of AC-PSR. Investigating the competition of mercury and chromium ions to be adsorbed onto AC-PSR.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗