Search NASA⌕ Search

Engineering topics

Moore, Cameron M.

Publications and source records attributed to Moore, Cameron M..

At least 19 records

Butene-Rich Alkene Formation from 2,3-Butanediol through Dioxolane Intermediates

The cost-effective production of sustainable aviation fuels (SAF) remains a major challenge within the energy sector. One approach to address this is the fermentation of biomass feedstocks into oxygenates followed by catalytic conversion to alkenes or other oligomerization precursors. 2,3-Butanediol (BDO) is a promising fermentation product due to its four-carbon nature, its decreased microorganism toxicity and associated higher maximum fermentation titers relative to other alcohols and oxygenates, and its capacity to be readily converted into butene isomers and longer chain alkenes. BDO conversion is currently constrained by separation challenges for BDO isolation due to its high boiling point and hydrophilicity. Here, this work expands upon previous BDO reactive separation via dioxolane formation over a solid acid catalyst by investigating the conversion of dioxolanes into alkene mixtures. Dioxolanes were formed from a range of aldehydes and subsequently converted over a Cu/ZSM-5 catalyst (448–523 K) via an ether cleavage, hydrogenation, and dehydration reaction network to form alkene-rich product mixtures (96% C 3+ alkene yield, 523 K). This selectivity is greater than that of direct BDO conversion to alkenes over an identical catalyst (89%, 523 K). C 3+ alkene selectivity is maximized between 498 and 523 K at complete dioxolane conversion without significant alkene hydrogenation to alkanes. The alkene product distributions can be tailored via both aldehyde selection during dioxolane formation and the dioxolane conversion reaction temperature. Alkene mixtures from dioxolane conversion predominantly reflect the carbon chain length and stereochemistry of BDO and the initial aldehyde at or below 498 K, yet higher reaction temperatures yield alkene mixtures of similar carbon chain distributions, regardless of initial aldehyde selection. Deactivation of the Cu/ZSM-5 catalyst is observed for multiple steps of the overall reaction network but can be minimized by facilitating the complete dioxolane-to-alkene reaction network at temperatures of at least 498 K.

2,3-butanediol↗

Method for conversion of diols to olefin products

A method for converting a diol in solution to an olefin fraction, the method comprising: (i) reacting a diol of the formula HO—R—OH in solution with a carbonyl-containing molecule of the formula: in the presence of an acid catalyst to result in a dioxolane molecule of the formula: wherein R is a hydrocarbon linker containing 1-12 carbon atoms, and R 1 and R 2 are independently selected from hydrogen atom and hydrocarbon groups containing 1-12 carbon atoms, wherein R 1 and R 2 optionally interconnect; (ii) removing the dioxolane molecule from the solution by phase separation; and (iii) contacting the dioxolane molecule with a metal-loaded zeolite at a temperature of 100-500° C. to convert the dioxolane molecule to an olefin fraction.

Li, Zhenglong↗

Processes for the preparation of alkyl furans using bifunctional copper catalysts

The present disclosure relates to the selective hydrodeoxygenation (HDO) of bio-based furanic ketones with a bifunctional copper-based catalyst in the presence of a solvent to prepare alkyl furans with high yield, purity, and scalability. The alkyl furans prepared herein are useful in the preparation of surfactants.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Recyclable polymers from environmentally benign building blocks

Disclosed herein are embodiments of a method for making recyclable polymers and a method for decomposing the polymers back to the monomers which can then be reused. The polymer are stable to aqueous and/or acid conditions and may have a formula II ##STR00001## The method to decompose the polymer back to the monomers may comprise heating the polymer in a protic organic solvent.

Sutton, Andrew D.↗

Separation, Recovery and Upgrading of 2,3-Butanediol from Fermentation Broth

2,3-Butanediol (BDO) is a bio-derived building block available from biomass through biochemical methods in high titers (>120 g L-1) making it an attractive target for production and further upgrading to chemical products and fuels such as sustainable aviation fuel. A key challenge to enable the adoption of BDO as a precursor is the effective separation and isolation of this molecule from the fermentation broth. 2,3-Butanediol has a boiling point higher than that of water (177 degrees C), and as a consequence, separation via distillation methods is an energy-intensive and therefore costly approach. We have improved the BDO separation through conversion to a 1,3-dioxolane directly in fermentation broth via reaction with bio-derived aldehydes catalyzed by a solid acid catalyst. The resulting dioxolane phase separates from the fermentation broth, allowing for easy decantation and isolation in >90% isolated yield. Isolated dioxolane can be used directly as a compression iginition fuel, trans-acetalized to recover high-purity BDO or used directly in a catalytic process as a BDO synthon to produce methyl ethyl ketone with aldehyde recovery in near quantitative yield.

aviation fuel↗

High Explosives and Energetics Asset Analysis Tool

The High Explosives and Energetics (HE&E) Asset Analysis Tool is a database and reference for LANL facilities, equipment, staffing and financial information pertinent to the HE&E program. The tool is used for the communication of the current state and investment planning for the program assets. Additional analyses can offer more insights into the dependencies and impacts of the assets within the HE&E portfolio. This tool is developed under collaboration with the HE&E Program Office.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

System and method for making fuels

Embodiments of a system and method are disclosed for obtaining high-energy fuels. In some embodiments, the system and method produces one or more fused cyclic compounds that can include one or more bridging points. The fused cyclic compounds are suitable for use as a high-energy fuels, and may be derived from biomass.

Sutton, Andrew D.↗

Impacts of Biologically Induced Degradation on Surface Energy, Wettability, and Cohesion of Corn Stover

The impacts of biological degradation on surface area, surface energy, wettability, and cohesion of anatomically fractionated (i.e., leaf, stalk, and cob) and bulk corn stover are presented in this study. The physical, thermal and chemical properties of corn stover are critical material attributes that not only influence the mechanical processing and chemical conversion of corn stover, but also the bulk solids handling and transport. The measured surface areas were observed to be dependent on the degree of biological degradation (mild vs. moderate vs. severe) and on the anatomical fraction. The surface area of the bulk corn stover samples increased with the degree of biological degradation. The leaf fraction was the most sensitive to biological degradation, resulting in an increase in surface area from 0.5 m 2 /g (mildly degraded) to 1.2 m 2 /g (severely degraded). In contrast, the surface area of the cob fraction remained relatively unaffected by the degree of biological degradation (i.e., mildly degraded–0.55 m 2 /g, severely degraded–0.40 m 2 /g. All biologically degraded samples resulted in significant changes to the surface chemistry (evidenced by an increase in surface energy. As a general trend, the surface energy of bulk corn stover increased with the degree of biological degradation—the same trend was observed for the leaf and stalk anatomical fractions; however, the surface energy for the cob fraction remained unchanged. Wettability, calculated from surface energy, for bulk corn stover samples did not reveal any discernable trend with the degree of biological degradation. However, trends in wettability were observed for the anatomical fractions, with wettability increasing for the stalk and leaf fractions, and decreasing for the cob fraction. Excluding the cob fraction, the work of cohesion increased with the degree of biological degradation. Understanding the impacts of biological degradation on the physical, chemical and thermal properties of corn stover offers insights to improve the overall operational reliability, efficiency and economics of integrated biorefineries.

09 BIOMASS FUELS↗

System and method for making fuels

Embodiments of a system and method are disclosed for obtaining high-energy fuels. In some embodiments, the system and method produces one or more fused cyclic compounds that can include one or more bridging points. The fused cyclic compounds are suitable for use as a high-energy fuels, and may be derived from biomass.

Sutton, Andrew D.↗

Building Structure-Property Relationships of Cycloalkanes in Support of Their Use in Sustainable Aviation Fuels

In 2018 13.7 EJ of fuel were consumed by the global commercial aviation industry. Worldwide, demand will increase into the foreseeable future. Developing Sustainable Aviation Fuels (SAFs), with decreased CO 2 and soot emissions, will be pivotal to the on-going mitigation efforts against global warming. Minimizing aromatics in aviation fuel is desirable because of the high propensity of aromatics to produce soot during combustion. Because aromatics cause o-rings to swell, they are important for maintaining engine seals, and must be present in at least 8 vol% under ASTM-D7566. Recently, cycloalkanes have been shown to exhibit some o-ring swelling behavior, possibly making them an attractive substitute to decrease the aromatic content of aviation fuel. Cycloalkanes must meet specifications for a number of other physical properties to be compatible with jet fuel, and these properties can vary greatly with the cycloalkane chemical structure, making their selection difficult. Building a database of structure-property relationships (SPR) for cycloalkanes greatly facilitates their furthered inclusion into aviation fuels. The work presented in this paper develops SPRs by building a data set that includes physical properties important to the aviation industry. The physical properties considered are energy density, specific energy, melting point, density, flashpoint, the Hansen solubility parameter, and the yield sooting index (YSI). Further, our data set includes cycloalkanes drawn from the following structural groups: fused cycloalkanes, n-alkylcycloalkanes, branched cycloalkanes, multiple substituted cycloalkanes, and cycloalkanes with different ring sizes. In addition, a select number of cycloalkanes are blended into Jet-A fuel (POSF-10325) at 10 and 30 wt%. Comparison of neat and blended physical properties are presented. One major finding is that ring expanded systems, those with more than six carbons, have excellent potential for inclusion in SAFs. Our data also indicate that polysubstituted cycloalkanes have higher YSI values.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Easier Access to Functional Furans

Traditional furan alkylation utilizes catalyst materials are unsafe, produce hazardous waste, and yield low reaction products. Researchers at Los Alamos National Laboratory have developed a new method to enable industries to produce valuable chemicals from biomass more safely with higher yields and less waste. This method has been successfully demonstrated on the benchtop, and is ready for testing to scale up for industrial synthesis applications. Los Alamos is seeking a licensee to scale this technology in-house, or a Cooperative Research and Development Agreement (CRADA) partner to scale the method within the Laboratory for a specific purpose.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modulation of H + /H - exchange in iridium-hydride 2-hydroxypyridine complexes by remote Lewis acids

In this study, a series of iridium hydride complexes featuring dihydrogen bonding are presented and shown to undergo rapid H + /H - exchange (1240 s -1 at 25 °C). We demonstrate that the H + /H - exchange rate can be modified by post-synthetic modification at a remote site using BH 3 , Zn(C 6 F 5 ) 2 , and [Me 3 O][BF 4 ]. This route provides a complementary strategy to traditional methods that rely on pre-metalation modifications to a metal's primary sphere.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Recycled Paper as a Source of Renewable Jet Fuel in the United States

Converting biomass into jet fuel involves more than the core chemical process. The overall process includes the logistics of harvesting and transporting the biomass, handling and preparing the material for processing, and processing and disposal of waste. All of these activities contribute to cost. Controlling cost involves more than developing efficient process chemistry. Choice of feedstock also has a significant impact on process economics. We consider chemical conversion of paper from municipal solid waste as a feedstock for the production of jet fuel and diesel. Paper has a significantly higher cellulose content than raw lignocellulosic biomass such as corn stover, so it requires less pretreatment to convert it into hydrocarbons than lignocellulosic biomass. Our techno-economic analysis showed that the cost of converting paper waste into jet fuel is about $1.00/gal less than jet fuel produced from corn stover. Although the cost of recycling paper into jet fuel is less than producing it from corn stover, the process is not competitive with petroleum. We estimated a minimum selling price of $3.97/gal for paper-derived jet fuel. Our sensitivity studies indicated that the biggest economic obstacle is the cost of cellulose hydrolysis. Direct hydrogenation of paper to sugar alcohols combined with increased economy of scale could make recycling paper jet fuel competitive.

09 BIOMASS FUELS↗

The compatibility performance of fuel system elastomers with two dioxolane molecules as blends with diesel

The compatibility of 17 elastomers with two dioxolane molecules was assessed by volume change and hardness measurements. Each molecule was blended with diesel in concentrations of 0, 10, 20 and 30 wt.%. The elastomers included two fluorocarbons, six acrylonitrile butadiene rubbers (NBRs), and one each of fluorosilicone, chloroprene rubber (CR), polyurethane, styrene butadiene rubber (SBR), hydrogenated NBR (HNBR), a blend of NBR and PVC (OZO), epichlorohydrin/ ethylene oxide (ECO), ethylene propylene diene monomer (EPDM), and silicone. Specimens of each elastomer were immersed in the test fuels for a period of 4 weeks and measured for property change. Afterwards they were dried at 60°C for 20 h and remeasured. The results showed that the dioxolanes were suitable with many of the elastomers and that the performances were essentially the same for both molecules. The dioxolanes were found to either have negligible impact beyond neat diesel or they produced a small increase in swell. This minimal impact is attributed to the fact that the solubility parameters (especially those associated with polarity and hydrogen bonding) of the dioxolanes are similar to those of diesel. As a result, little change in solubility and hence swell occurred when dioxolane was added to the diesel.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Top 13 Blendstocks Derived from Biomass for Mixing-Controlled Compression-Ignition (Diesel) Engines: Bioblendstocks with Potential for Decreased Emissions and Improved Operability

Reducing the impacts of medium- and heavy-duty (MD/HD) ground transportation can be enabled by fuel-engine combinations that use lower compression ignition liquid fuels and reduce criteria pollutant emissions. Fuels and blendstocks combined with advanced engine technologies could reduce the cost of ownership and the emission of pollutants, including soot, nitrogen oxides (NOx) and greenhouse gases (GHGs), from MD/HD vehicles. This report describes the evaluation and screening of MD/HD mixing-controlled compression ignition (MCCI) biofuel candidates for further development and commercialization. The report is aimed at 1) biofuel researchers looking to better understand options to reduce criteria pollutant and GHG emissions while maintaining efficiency and meeting requirements for engine operability and 2) engine researchers who want to evaluate biofuels that meet diesel fuel properties for their impact on conventional and advanced diesel combustion strategies.

09 BIOMASS FUELS↗

Fully Recyclable Polycarbonates from Simple, Bio-Derived Building Blocks

Plastic buildup and accumulation in the environment are an increasingly large problem facing civilization. Petroleum-based plastics can exist for hundreds to thousands of years in the environment, destroying habitats and polluting water. Environmentally conscious replacements for plastics are urgently needed. In this publication, we present a biobased alternative to petroleum-based polycarbonates. Using a diol monomer derived from glycerol and glycerol products, we have synthesized aliphatic polycarbonates with comparable physical properties to petroleum-based incumbents. The polymer can be quantitatively depolymerized using warm methanol to recover the monomer which can be repolymerized multiple times, or alternatively, the monomer, which is inherently nontoxic, can slowly break apart to the original components. This provides two end-of-life options for this material recycle or decomposition under environmental conditions to benign building blocks, thus providing a potential pathway to avoid environmental and bioaccumulation of plastics. We also demonstrate the ability to selectively recover the monomer from a simulated mixed-plastic waste environment; the monomer recovered this way functions identically to the virgin monomer after purification. This work represents an important step in the progress toward environmentally conscious polymer design with multiple end-of-life options.

36 MATERIALS SCIENCE↗

A Process for Converting Corn Bran to Furfural without Mineral Acids

Furfural is a bio-derived industrial chemical that has been identified as a platform chemical for the production of renewable fuels and chemicals. Currently, domestic feedstock and processing costs are high, so United States-based furfural production is not competative on the global market. Furthermore, furfural production costs must be much less than the current market price if it is to be competative platform for bio fuels and chemicals. An alternative low-cost feedstock for furfural is corn bran from a corn ethanol process. We have proposed a new process for producing furfural from corn bran that consumes no mineral acids. The high hemicellulose content of corn bran reduces capital and operating costs. Eliminating mineral acids reduces chemical consumption and makes the residual solids suitable for consumption as animal feed. The combination of a low cost source of hemicellulose and high valued residue could make the proposed process more economical than current processes based on corncobs.

09 BIOMASS FUELS↗