Search NASA⌕ Search

Engineering topics

Moore, E. E.

Publications and source records attributed to Moore, E. E..

Low- and high-temperature heat capacity of metallic technetium

The heat capacity of technetium metal has been measured from 2.1 K to 293 K using relaxation calorimetry and the enthalpy increment up to 1700 K using drop calorimetry. The low-temperature calorimetry measurements revealed a superconducting transition temperature of T C = (7.76 ± 0.08) K. The zero-degree Debye temperature(θ E ) and the electronic heat capacity coefficient ($γ_{e}$) of the normal state were derived as (307 ± 5) K and (4.22 ± 0.20) mJ·K –2 ·mol –1 , respectively. The standard entropy of the superconducting standard state was derived as $S^{°}_{m}$ (298.15) = (36.8 ± 1.3) J·K –1 ·mol –1 . The fitting of enthalpy-increment data together with high-temperature heat capacity data reported in literature yielded a heat capacity equation up to 1700 K.

36 MATERIALS SCIENCE↗

Strength mechanisms and tunability in Al-Ce-Mg ternary alloys enabled by additive manufacturing

Al-Ce-based alloys are promising candidates for additive manufacturing (AM) due to their hot-cracking resistance and because they do not require heat treatment to obtain precipitation strengthening. Rapid solidification rates enabled by AM methods can lead to enhanced mechanical properties; however, the strengthening mechanisms over large composition ranges were unclear. Here, combinatorial synthesis by directed-energy deposition (DED) and hardness measurements were used to rapidly map the composition-dependent strength of the ternary Al-Ce-Mg system. Tensile testing and microstructure characterization of selected compositions were performed to elucidate the compositional dependence of the strengthening mechanisms. Al 11 Ce 3 precipitates were present in all cases, and the maximum hardness (1.25 GPa) was measured for the Al-8Ce-10Mg composition. A combination of (i) Hall-Petch strengthening, based on the FCC-matrix-phase cell size; (ii) particle strengthening, based on Al 11 Ce 3 volume fraction and size; and (iii) solid-solution strengthening, based on Mg composition of the matrix phase, were used to account for the measured strengths. Vickers hardness is shown to correlate well with ultimate tensile strength in these alloys, highlighting the value of surface-based techniques for rapid screening.

36 MATERIALS SCIENCE↗

Phase Formation in Nuclear Fallout

An understanding of the physical and chemical process occurring in a nuclear explosion enables predictions of the effects of nuclear weapons, including characteristics of radioactive fallout resulting from the explosion. Near-surface nuclear explosions are of particular interest due to the potential for significant amounts of environmental material to interact with and alter the physical and chemical behavior of the fireball. Such interactions have the potential to affect the distribution of radioactive species in the fireball and subsequently become incorporated into fallout through a process known as radiochemical fractionation. Studying variations in fallout formed in different historical testing environments allows us to understand the influence of local environments on fallout formation processes. In particular, constraining variations in thermal evolution and redox conditions during the evolution of the fireball can be useful to understanding how sensitive fallout radiochemical fractionation may be to the local explosion environment. However, untangling these conditions in complex, multicomponent fallout is a challenge. Here we present one method of constraining and interpreting fallout formation conditions by relating computationally derived phase stability predictions to observations in historic fallout. Development of such approaches will help improve physics-based models of fallout formation and radiochemical fractionation in complex, near surface nuclear detonations.

36 MATERIALS SCIENCE↗

Experimental and computational assessment of U Si N ternary phases

Uranium nitride-silicide composites are being considered as a high-density and high thermal conductivity fuel option for light water reactors. During development, chemical interactions were observed near the silicide melting point which resulted in formation of an unknown U-Si-N ternary phase. Here in the present work, U-Si-N composite samples were produced by arc-melting U 3 Si 2 under an argon-nitrogen atmosphere to form the ternary phase. The resulting samples were characterized by SEM/EDS-EPMA and XRD, and demonstrated an equilibrium between U 3 Si 2 , UN, USi and a U-Si-N phase with a distinct crystallographic structure. Rietveld refinement of the ternary structure was performed, considering the ternary structures existent in the analogue U-Si-C system, and a good fit was obtained for the hexagonal U 20 Si 16 N 3 phase. DFT + U calculations were performed in parallel to evaluate the thermodynamic and dynamic stability of the ternaries U 20 Si 16 N 3 and U 3 Si 2 N 2 . The calculated enthalpy of formation and phonon dispersion support the existence of stable U 20 Si 16 N 3 and U 3 Si 2 N 2 , although some soft modes in the U 20 Si 16 N 3 phase phonons are observed. The results presented here thus demonstrate the occurrence of at least one ternary phase in the U-Si-N system.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗