Engineering topics

Moore, H. J.

Publications and source records attributed to Moore, H. J..

At least 55 records · Page 3

NASA NTRS1980

Surface erosion caused on Mars from Viking descent engine plume

During the Martian landings the descent engine plumes on Viking Lander 1 (VL-1) and Viking Lander 2 (VL-2) eroded the Martian surface materials. This had been anticipated and investigated both analytically and experimentally during the design phase of the Viking spacecraft. This paper presents data on erosion obtained during the tests of the Viking descent engine and the evidence for erosion by the descent engines of VL-1 and VL-2 on Mars. From these and other results, it is concluded that there are four distinct surface materials on Mars: (1) drift materials, (2) crusty to cloddy material, (3) blocky material, and (4) rock.

Hutton, R. E.↗

NASA NTRS1980

Small impact craters in the lunar regolith - Their morphologies, relative ages, and rates of formation

The size frequency distributions, relative ages, and absolute age determination of lunar impact craters ranging in diameter from 1 to 100 m are discussed in relation to present-day and past impact rates. The size frequency distributions of craters produced by impacts on the lunar surface and of craters remaining after degradation with time and later impacts are examined, together with the steady state frequency curves for various crater morphologies. Relations between the relative ages of craters, their morphologies and their diameters are discussed, and the calibration of this kind of relationship with absolute crater ages by the location of individual craters with known absolute ages, diameters and frequency distribution statistics is considered. Estimates of present and past cratering rates based on crater size-frequency distributions are presented which suggest that the rate of impacting objects producing small lunar craters could have been constant over the last 100 million years.

Moore, H. J.↗

NASA NTRS1979

Sample fields of the Viking landers, physical properties, and aeolian processes

Surface sampler activities on Mars during the Viking extended mission are considered, including excavation of deep trenches, construction of conical piles of materials, backhoe touchdown experiments, and acquisition of contiguous pictures of the surface beneath number 2 terminal descent engines using mirrors. Results of the Physical Properties Investigation that are relevant to aeolian processes are also discussed. Both pictures and surface sampler data indicate that the surface materials in the sample fields of the Viking landers may be grouped, in order of increasing strength, into drift material, crusty to cloddy material, blocky material and rocks.

Moore, H. J.↗

NASA NTRS1978

Yield strengths of flows on the earth, Mars, and moon

Dimensions of flows on the earth, Mars, and moon and their topographic gradients obtained from remote measurements are used to calculate yield strengths with a view to explore the validity of the Bingham plastic model and determine whether there is a relation between yield strengths and silica contents. Other factors are considered such as the vagaries of natural phenomena that might contribute to erroneous interpretations and measurements. Comparison of yield strengths of Martian and lunar flows with terrestrial flows suggests that the Martian and lunar flows are more akin to terrestrial basalts than they are to terrestrial andesites, trachytes, and rhyolites.

Moore, H. J.↗

NASA NTRS1977

Nevada Test Site craters used for astronaut training

Craters produced by chemical and nuclear explosives at the Nevada Test Site were used to train astronauts before their lunar missions. The craters have characteristics suitable for reconnaissance-type field investigations. The Schooner test produced a crater about 300 m across and excavated more than 72 m of stratigraphic section deposited in a fairly regular fashion so that systematic observations yield systematic results. Other features common on the moon, such as secondary craters and glass-coated rocks, are present at Schooner crater. Smaller explosive tests on Buckboard Mesa excavated rocks from three horizontal alteration zones within basalt flows so that the original sequence of the zones could be determined. One crater illustrated the characteristics of craters formed across vertical boundaries between rock units. Although the exercises at the Nevada Test Site were only a small part of the training of the astronauts, voice transcripts of Apollo missions 14, 16, and 17 show that the exercises contributed to astronaut performance on the moon.

Moore, H. J.↗

NASA NTRS1977

Surface materials of the Viking landing sites

In the present paper, the soil characteristics at the Viking sites are discussed in terms of bulk density, particle size, angle of internal friction, cohesion, and moisture content. At the Viking Lander-1 site, there is a relatively weak drift material, along with more cohesive materials of a rocky area, and rocks. A variety of materials are present also at the Lander-2 site. Moisture content is low as compared to terrestrial soils. Current estimates of some of the physical properties are tabulated and discussed.

Moore, H. J.↗

NASA NTRS1977

The Aristarchus-Harbinger region of the moon - Surface geology and history from recent remote-sensing observations

Photographic and remote sensing observations made from earth and Apollo orbiting spacecraft were used to study the Aristarchus Plateau-Montes Harbinger region. The appearance of the area is described, and a delineation of geologic map units and their stratigraphic relationships is presented. Physical and chemical properties of certain of the geologic units are deduced, and the interrelationships between materials of volcanic and impact origin, including the effects of excavation, redistribution, and mixing of previously deposited materials by younger impact craters, are discussed. A detailed geologic history of the region is developed. Attention is directed to the anomalous red dark mantle on the plateau; it is thought that this layer consists of fine-grained block-free material containing a relatively large fraction of orange glass, and that this layer is probably of pyroclastic origin, laid down at some time during the Imbrian period of mare flooding.

Zisk, S. H.↗

NASA NTRS1976

Apollo experiment S-217 IR/radar study of Apollo data

An experiment using Earth based remote sensing radar, infrared eclipse, and color difference data to deduce surface properties not visible in Apollo photography is reported. The Earth based data provided information on the small scale (centimeter sized) blockiness and on the surface chemical composition (titanium and iron contents) of the lunar surface. These deduced surface properties complemented the new Apollo photography, leading to refined geologic interpretations of the lunar surface.

Thompson, T. W.↗

NASA NTRS1976

Radar characteristics of Viking 1 landing sites

Radar observations of Mars at centimeter wavelengths in May, June, and July 1976 provided estimates of surface roughness and reflectivity in three potential landing areas for Viking 1. Surface roughness is characterized by the distribution of surface landing slopes or tilts on lateral scales of the order of 1 to 10 meters; measurements of surface reflectivity are indicators of bulk surface density in the uppermost few centimeters. By these measures, the landing site at 47.5 deg W, 22.4 deg N is rougher than the Martian average, although it may be near the average for elevations accessible to Viking, and is estimated to be near the Mars average in reflectivity. The site at the center of Chryse Planitia, 43.5 deg W, 23.4 deg N, may be an area of anomalous radar characteristics, indicative of extreme, small-scale roughness, very low surface density, or a combination of these two characteristics. Observations of the original Chryse site at 34 deg W, 19.5 deg N indicate that that area is at least twice as rough as the Mars average.

Tyler, G. L.↗

NASA NTRS1976

The scarcity of mappable flow lobes on the lunar maria - Unique morphology of the Imbrium flows

Unique features of Imbrium lava flows are their thickness (10-30 + m) and lengths (up to 400 km for phase-III, and up to 600 km for phase-II) when compared along later Imbrium and Eratosthenian units. They are distinct by virtue of their inferred short-lived (on the order of days) and extremely rapid rates of effusion. It is shown that there are numerous other basalt eruptives within the young blue western maria. The emplacement of these flows was by complex multilayering and intertonguing of individual flow units with thicknesses less than 10 m. They are generally restricted to the near vicinity of multiple vent sources.

Schaber, G. G.↗

NASA NTRS1975

Gypsy moth defoliation assessment: Forest defoliation in detectable from satellite imagery

The author has identified the following significant results. ERTS-1 imagery obtained over eastern Pennsylvania during July 1973, indicates that forest defoliation is detectable from satellite imagery and correlates well with aerial visual survey data. It now appears that two damage classes (heavy and moderate-light) and areas of no visible defoliation can be detected and mapped from properly prepared false composite imagery. In areas where maple is the dominant species or in areas of small woodlots interspersed with agricultural areas, detection and subsequent mapping is more difficult.

Moore, H. J.↗

NASA NTRS1974

Multiringed basins - Illustrated by Orientale and associated features

Geologic mapping and photographs of the Orientale multiring basin are studied as to origin, size, and nature and distribution of ejecta. Six facies of ejecta are observed around the Cordillera Mountains: concentric, radial, smooth plains, grooved, secondary impact craters, and fissured. Transport of these ejecta occurred by block gliding, landsliding, debris flow, and possibly by base surge, viscous flow, and ballistic ejection. The ejecta are mainly clastic types, but melts and annealed breccias are expected to be abundant. Mixing of ejecta and substrate materials must have occurred; compositions of the ejecta are probably zoned laterally and vertically.

Moore, H. J.↗

NASA NTRS1973

Remote sensing of Mare Serenitatis

An examination was made of earth based observations of optical color differences, infrared eclipse temperatures, and radar backscatter for Mare Serenitatis. Information is also included on orbital observations, physical properties of surface types, and correlation of surface types with geologic units. Differences in these remote observations are attributed to variations in chemical and minerological compositions.

Thompson, T. W.↗

NASA NTRS1973

Calibration of radar data from Apollo 17 and other mission results

An examination was made of radar data on depolarized radar echoes for the general areas of (1) the Apollo 11, 12, 14, 15, 16, and 17 landing sites, (2) Ranger 7, 8, and 9 impact sites, and (3) the Surveyor 1, 3, 5, and 7 landing sites. These data were then compared with photographic data. Surveyor 6 was excluded because it landed near the center of the lunar disk where echo data are poor. Three problems concerning the echo data are (1) the frequency distributions of echo strengths from site to site, (2) the areal distribution of echoes, and (3) detailed correlation of echoes with the photographs of the Apollo 17 landing area.

Moore, H. J.↗

NASA NTRS1973

Comparison between photogrammetric and bistatic-radar slope frequency distributions

A comparison was made of the results for lunar surface roughness estimates and slope frequency distributions obtained by using photogrammetric techniques with those obtained by using bistatic radar. Three topics were discussed: (1) the form of the slope frequency distributions, (2) the change of roughness estimates of the lunar surface with scale, and (3) the magnitude of surface roughness.

Moore, H. J.↗

NASA NTRS1973

Effect of photogrammetric reading error on slope-frequency distributions

The effect of reading error on two hypothetical slope frequency distributions and two slope frequency distributions from actual lunar data in order to ensure that these errors do not cause excessive overestimates of algebraic standard deviations for the slope frequency distributions. The errors introduced are insignificant when the reading error is small and the slope length is large. A method for correcting the errors in slope frequency distributions is presented and applied to 11 distributions obtained from Apollo 15, 16, and 17 panoramic camera photographs and Apollo 16 metric camera photographs.

Moore, H. J.↗

NASA NTRS1973

Microcraters on Apollo 15 and 16 rocks

Microcrater frequency distributions, determined for 11 Apollo 16 rocks and three Apollo 15 rocks, fall into four categories. Category 1 rocks (68415, 68416, 62235) are angular, cratered on one side only, and have moderate crater densities. Category 2 rocks (60016, 66075, 61175) are subrounded, cratered on all sides, and have distributions suggestive of the steady state. Category 3 rocks (61015, 62295) are subangular and cratered on only one side, but the crater frequency distributions have some of the characteristics of category 2 rocks. Category 4 rocks (15015, 15017, 15076, 60335) are angular, cratered on only one side, and have moderated to very low crater densities. The crater frequency distributions of categories 1 and 4 have properties indicating the possibility of estimating the time they were exposed to micrometeor bombardment. Category 1 rocks appear to have been exposed for 2 to 3 m.y. These rocks, particularly 68415, 68416, and 69935, may be ejecta from South Ray Crater, indicating an age of 2 to 3 m.y. for South Ray Crater. Category 4 rocks have been exposed for much shorter periods.

Morrison, D. A.↗

NASA NTRS1972

Crater shadowing effects at low sun angles, part Q

A comparison of Apollo 15 lunar surface photographs taken at low sun-elevation angles with photographs of an experimentally cratered surface at low lighting angles is discussed. The comparison revealed marked similarities, the most significant being that the smallest craters in both sets of photographs are filled with shadows that form beadlike chains and clusters. It was also found that the fraction of area covered by shadows within the smaller craters is so large that 30 to 40 percent of the total field of view is covered by shadow. It is concluded that: the fraction of area covered by resolvable craters, which should be somewhat less than the fraction of area covered by shadow for photographs with very low sun elevation angles, may be calculated using the steady state crater frequency distribution for craters from 20 to 100 m in diameter and then adding the area covered by larger craters for which the crater frequency distribution has the form of the crater-production frequency distribution.

Moore, H. J.↗