Engineering topics

Morco, Ryan Penaranda

Publications and source records attributed to Morco, Ryan Penaranda.

5 records

DOE OSTI2024

Radiation-assisted electrochemical reduction of CO 2 to CO

Carbon monoxide (CO) is a versatile intermediate feedstock for many applications and can be produced through the electrochemical reduction of carbon dioxide (CO 2 ). However, current electrochemical CO production is hindered by high overall costs, primarily due to low conversion efficiencies and significant energy requirements. Herein, we report a unique way of enhancing the electrochemical reduction of CO 2 to CO using gamma (γ) photons. The γ-irradiation applied to the electrochemical cell setup induces the production of e˙ - , which results in an increased CO 2 ionization and production of excited CO 2 (CO$^{*}_{2}$) molecules via lower energy barrier. The ionized CO 2 ˙ - is quickly stabilized over a silver catalyst, providing an alternative low activation energy route for CO 2 reduction. In conclusion, a decrease in the overpotential barrier enhanced the electrochemical reduction of CO 2 to CO by 25%.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

DOE OSTI2023

Radiation-induced dry reforming: A negative emission process

The reaction between the most abundant greenhouse gases (GHG) to produce hydrogen might represent the most powerful and effective decarbonizing opportunity, if a low-carbon energy source is used to drive it. This is the case of methane (CH 4 ) dry reforming (MDR) where its reaction with carbon dioxide (CO 2 ) produces synthesis gas (syngas, a mixture of carbon monoxide and hydrogen). Here this study explores the feasibility of using ionizing radiation to induce the MDR reaction, at low temperatures and/or less energy demanding conditions. Additionally, the ionizing radiation is proposed to be supplied by nuclear power plants (NPPs), which are low-carbon reliable energy generation sources. Thus, the radiolysis of CO 2 , CH 4 and their mixtures, under ?-irradiation was evaluated in the absence and presence of nickel catalysts. The radiation-induced MDR reaction and radiation-induced catalytic promotion were proven to take place at temperatures close to ambient though at low conversion, with yields below 1%. Since irradiation and heat can be provided by a nuclear power plant, this radiation-induced reaction establishes a connection between nuclear energy to renewable resources and enables a pathway for a decarbonized cleaner chemical industry, for producing green chemicals.

08 HYDROGEN↗

DOE OSTI2023

Dioctyl ether radiolysis under used nuclear fuel reprocessing conditions: Foundational knowledge for the development of sacrificial ligand grafts

Radiation-induced ligand destruction and concomitant degradation product formation is unavoidable under envisioned used nuclear fuel reprocessing conditions, and ultimately limits the recyclability of a given solvent system formulation. With this in mind, a novel approach to ligand innovation for advanced separations processes is in the design of tailored “protomolecules,” which when exposed to ionizing radiation undergo desired chemical transformations, thereby allowing for a reprocessing solvent system to advantageously evolve with absorbed radiation dose. Here we provide foundational knowledge for the time-resolved (electron pulse) and steady-state (cobalt-60 gamma) radiolytic behavior of dioctyl ether, a protomolecule grafting surrogate. Gamma irradiation of single-phase solutions of dioctyl ether (5–100 vol.%) in n-dodecane resulted in the loss of dioctyl ether (G = -0.72 µmol J –1 ) and the formation of octane (G = 0.11 µmol J –1 ) and octanol (G = 0.15 µmol J –1 ) degradation products, the latter of which is a known reprocessing phase modifier and radioprotectant. Further, these radiation-induced changes were attributed to direct radiation effects, for more concentrated dioctyl ether solutions, and indirect radiation effects, predominantly driven by the reaction of dioctyl ether with the dodecane radical cation, for which we report a second-order rate coefficient of k = (1.53 ± 0.05) × 10 10 L mol –1 s –1 . Under typical biphasic extraction (4.0 mol L –1 HNO 3 ) and strip (0.1 mol L –1 HNO 3 ) reprocessing conditions, gamma irradiation of 5 vol.% dioctyl ether solvent systems afforded negligible change in the rate of parent molecule destruction but promoted significant differences in the radiolytic behavior of its degradation products. These differences are attributed to their respective interactions with [dioctyl ether/HNO 3 /H 2 O] and [octanol/HNO 3 /H 2 O] adducts extracted into the organic phase. Overall, these results support the grafting of ether linkages to advanced separations ligands (e.g., modified diglycolamides).

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

DOE OSTI2023

Milestone 1.2.13: Preliminary Measurements of Radiolytic Nitric Acid Formation to Support Predictive Model Validation

Predictive computational models have been developed to support the technical basis for extended dry storage of aluminum-clad spent nuclear fuel (ASNF) in helium-backfilled cannisters. To date, these models have been optimized on a variety of irradiation experiments designed to elucidate the radiation-induced formation of molecular hydrogen gas, a radiolysis product that is potentially problematic for the safe storage of ASNF. However, the yield of nitric acid (HNO3) has not been determined, despite conservative predictions of its formation (300–4000 ppm) in 1% residual air environments irradiated in contact with ASNF. HNO3, another problematic radiolysis product, can lead to enhanced corrosion and potentially compromise storage canister integrity. Thus, to support the validation of predictive computer models, we report the measurement and quantification of HNO3 from the gamma irradiation of aluminum alloy coupons in humid air.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

DOE OSTI2022

Milestone 1.2.11: H 2 Production from Surrogate Non-Native Corrosion Plumes on Aluminum 6061-T6 Fuel Cladding Surrogates

Thick, localized, “non-native” corrosion plumes have been identified on Advanced Test Reactor fuel elements, raising concern on their impact on the radiolytic formation of molecular hydrogen gas (H 2 ) from aluminum-clad spent nuclear fuel (ASNF) under proposed extended (> 50 years) dry storage conditions. Here, we report our findings on H 2 generation from the gamma irradiation (up to 52 MGy) of surrogate “non-native” corrosion plume coupons: ambient-temperature-corroded (~350 days in water) aluminum alloy 6061 (AA6061) coupons in helium gas environments with ~0% added relative humidity. Additionally, we provide a comparison of proposed ASNF drying techniques— vacuum drying only, vacuum drying + 100 °C for 4 hr, and vacuum drying + 220 °C for 4 hr—on the yield of H 2 from these surrogate systems. The presented data indicates that similar amounts of H 2 (~2 × 10–3 µmol J–1) are formed from gamma irradiated AA6061 coupons corroded under different temperature regimes, i.e., ambient/350 days vs. 90 C/30 days. These findings validate current, complimentary modelling predictions based on high-temperature-corrosion irradiation data only. Further, the application of a heat treatment procedure (100 and 220 °C), in conjunction with vacuum drying, accelerated the rate at which a steady-state H 2 yield was attained, in comparison to vacuum only, due to the removal of H 2 precursors in the form of adsorbed waters. Interestingly, within the confidence limits of our measurements, negligible difference in total H 2 yield was found between the two investigated heat treatment procedures.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗