Search NASA⌕ Search

Engineering topics

More, Karren

Publications and source records attributed to More, Karren.

At least 19 records

Basic Energy Sciences Roundtable: Foundational Science for Carbon-Neutral Hydrogen Technologies

The amount of molecular hydrogen used worldwide is enormous; about 70 million metric tons are produced globally every year, with approximately 10 million metric tons produced within the U.S. alone. 1 Hydrogen is used primarily by the industrial sector for oil refining; chemical production, especially for ammonia; steel manufacturing; and transportation fuels. With the recent announcement of the Hydrogen Shot, the first U.S. Department of Energy (DOE) Energy Earthshot, the DOE declared a near-term focus on “accelerating breakthroughs of more abundant, affordable, and reliable clean energy solutions within the decade.” Consequently, there is a compelling need for novel approaches to enable hydrogen processes and technologies that do not emit carbon dioxide (i.e., are carbon-neutral). Innovative hydrogen research and development is required to impact how hydrogen is produced, stored, transported, converted, and used. Although progress has been made over the previous two decades, fundamental research can play a critical role in overcoming the technical hurdles that continue to limit implementation of economically viable systems and processes for carbon-neutral hydrogen technologies.

08 HYDROGEN↗

Origin of increased helium density inside bubbles in Ni (1–$x$) Fe $x$ alloys

Due to virtually no solubility, He atoms implanted or created inside materials tend to form bubbles, which are known to damage material properties through embrittlement. Higher He density in nano-sized bub- bles was observed both experimentally and computationally in Ni (1–$x$) Fe $x$ -alloy samples compared to Ni. The bubbles in the Ni (1–$x$) Fe $x$ -alloys were observed to be faceted, whereas in elemental Ni they were more spherical. Molecular dynamics simulations showed that stacking fault structures formed around bubbles at maximum He density. Higher Fe concentrations stabilize stacking fault structures, suppress evolution of dislocation network around bubbles and suppress complete dislocation emission, leading to higher He density.

36 MATERIALS SCIENCE↗

From suppressed void growth to significant void swelling in NiCoFeCr complex concentrated solid-solution alloy

Void swelling can result in dimensional instability and undermine the safe operation of nuclear reactors. Current strategies to inhibit void swelling mainly focus on enhancing defect absorption and recombination by introducing high-density defect sinks. Complex concentrated solid-solution alloys (CSAs), including high-entropy alloys, can withstand severe radiation damage due to their inherent chemical complexity without interfaces. However, the underlying mechanisms for void suppression in CSAs are far from clear. In this research, we studied the void evolution with respect to irradiation depths, doses, and temperatures in equiatomic NiCoFeCr under 3 MeV Ni ion irradiations. At relatively low doses (16 and 54 displacements per atom, dpa), voids form mainly outside of the ion-damaged region, and void formation in the peak damage region is suppressed, leading to negligible swelling. However, with further increase of dose (86 up to 250 dpa), significant void growth occurs in the peak damage region and extended dislocation lines dominate instead of short dislocation lines and loops formed at lower doses. From 500 to 700 °C, the dislocation density decreases while dislocations grow. Although the overall void swelling increases dramatically from 500 to 580 °C at 54 dpa, void growth in the peak damage region is still suppressed. The transition from suppressed void growth to significant void swelling is attributed to dislocation evolution and local chemical inhomogeneity (enrichment of Fe/Cr in the matrix) at higher doses. Our study shows that controlling element diffusion and defect evolution through tuning chemical complexity can further enhance the swelling resistance of CSAs.

36 MATERIALS SCIENCE↗

Interpreting nanovoids in atom probe tomography data for accurate local compositional measurements

Quantifying chemical compositions around nanovoids is a fundamental task for research and development of various materials. Atom probe tomography (APT) and scanning transmission electron microscopy (STEM) are currently the most suitable tools because of their ability to probe materials at the nanoscale. Both techniques have limitations, particularly APT, because of insufficient understanding of void imaging. Here, we employ a correlative APT and STEM approach to investigate the APT imaging process and reveal that voids can lead to either an increase or a decrease in local atomic densities in the APT reconstruction. Simulated APT experiments demonstrate the local density variations near voids are controlled by the unique ring structures as voids open and the different evaporation fields of the surrounding atoms. We provide a general approach for quantifying chemical segregations near voids within an APT dataset, in which the composition can be directly determined with a higher accuracy than STEM-based techniques.

36 MATERIALS SCIENCE↗

Atomically Dispersed Single Ni Site Catalysts for Nitrogen Reduction toward Electrochemical Ammonia Synthesis Using N 2 and H 2 O

Ammonia (NH 3 ) electrosynthesis gains significant attention as NH 3 is essentially important for fertilizer production and fuel utilization. However, electrochemical nitrogen reduction reaction (NRR) remains a great challenge because of low activity and poor selectivity. Herein, a new class of atomically dispersed Ni site electrocatalyst is reported, which exhibits the optimal NH 3 yield of 115 µg cm -2 h -1 at –0.8 V versus reversible hydrogen electrode (RHE) under neutral conditions. High faradic efficiency of 21 ± 1.9% is achieved at -0.2 V versus RHE under alkaline conditions, although the ammonia yield is lower. The Ni sites are stabilized with nitrogen, which is verified by advanced X-ray absorption spectroscopy and electron microscopy. Density functional theory calculations provide insightful understanding on the possible structure of active sites, relevant reaction pathways, and confirm that the Ni-N 3 sites are responsible for the experimentally observed activity and selectivity. Extensive controls strongly suggest that the atomically dispersed NiN 3 site-rich catalyst provides more intrinsically active sites than those in N-doped carbon, instead of possible environmental contamination. Overall, this work further indicates that single-metal site catalysts with optimal nitrogen coordination is very promising for NRR and indeed improves the scaling relationship of transition metals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Improved electrochemical cycling stability of intercalation battery electrodes via control of material morphology

Using a model tunnel manganese oxide with the todorokite crystal structure (T-MnO 2 ), we reveal that controlling the morphology of the active material can improve the cycling stability of intercalation battery electrodes. The T-MnO 2 structure is built from tunnels that provide spacious 1D diffusion channels for charge-carrying ions. Taking advantage of the unique ability to synthesize T-MnO 2 in the form of both highly crystalline two-dimensional (2D) nanoplatelets and one-dimensional (1D) nanowires through a facile hydrothermal growth method, we investigated the effect of nanoscale particle dimensions on reversible battery cycling. Insertion of ions into the tunnels results in anisotropic expansion of the structure, making T-MnO 2 with different morphologies an excellent model platform to understand how intercalation-induced volume change, typically leading to the deterioration of the electrode performance over extended cycling, can be controlled through synthesis of targeted morphologies. T-MnO 2 nanowires showed not only significantly improved capacity retention but also substantially higher specific capacity than the T-MnO 2 nanoplatelets. The enhanced electrochemical properties of the nanowire electrodes could be attributed to the larger surface-to-volume ratio than that of nanoplatelets, resulting in higher contact area with electrolyte for the nanowires. Moreover, due to the smaller cross-sectional area of the nanowires, volume expansion and contraction perpendicular to the structural tunnels induced by reversible ion intercalation occurs in a more facile fashion. In this research we demonstrate that chemically controlling morphology and producing particles with nanostructure dimensionality replicating that of atomic structure (i.e., 1D morphology and 1D structure) makes it possible to enhance material performance.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Highly Active, Durable Dispersed Iridium Nanocatalysts for PEM Water Electrolyzers

One of the primary challenges for proton exchange membrane (PEM) electrolyzers is the sluggish kinetics of the oxygen evolution reaction (OER) at the anode, which requires the use of precious metals or metal oxides, such as iridium (Ir) or iridium oxide (IrO x ), as the OER catalyst. This study introduces a one-pot surfactant-free polyol reduction method to disperse iridium nanoparticles on a tungsten doped titanium oxide (W x Ti 1-x O 2 ) support. The polyol reduction approach for the Ir/W x Ti 1-x O 2 catalyst synthesis was systematically investigated to determine the influence of synthesis parameters on the catalysts’ physical properties, and its electrochemical activity and durability. The most promising synthesized catalyst with 38 wt% Ir (Ir 38% /W x Ti 1-x O 2 ) demonstrated five times higher mass activity than an Ir-black baseline (the industry standard catalyst) based on rotating-disk electrode (RDE) studies. When tested in a real water electrolyzer system, the synthesized catalyst enabled the Ir loading to be lowered by an order of magnitude while retaining a similar electrolyzer performance found for the baseline Ir-black catalyst. In conclusion, the Ir 38% /W x Ti 1-x O 2 catalyst also demonstrated remarkable stability, e.g., only small voltage (<20 mV) increase was observed during a 1200-hour durability test at a constant current density of 1500 mA/cm 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Integrating Novel Microscopy into Battery Research: From Atomic Resolution to In Situ and Functional Imaging

Regardless of their different configurations and chemistries, current energy-storage systems, e.g. Li-ion, Li-S, Li-air, and all-solid-state Li batteries, rely on the use of solid-state ion conducting materials as electrodes and/or electrolytes. Continuous ion hopping from one mobile ion site to adjacent vacancy sites in a crystalline lattice forms the basis for ion conduction in solids. Atomic-scale factors, such as lattice structure and the concentration and distribution of mobile carriers and vacancies, decide the ion conductivity in solids, and thus dictate the rate capability and capacity in batteries.

25 ENERGY STORAGE↗

Material-Process-Performance Relationships for Roll-to-Roll Coated PEM Electrodes

Roll-to-roll (R2R) coating is the most economical and highest throughput method for producing fuel cell electrodes. R2R coating encompasses many different methodologies to create uniform films on a moving web substrate. Here we explore two coating methods, gravure and slot die, to understand the impacts of each on film uniformity and performance.

30 DIRECT ENERGY CONVERSION↗

Durability of Polymer Electrolyte Membrane Fuel Cells Operated at Subfreezing Temperatures

The structure, composition, and interfaces of membrane electrode assemblies (MEA) and gas-diffusion layers (GDLs) have a significant effect on the performance of single-proton-exchange-membrane (PEM) fuel cells operated isothermally at subfreezing temperatures. During isothermal constant-current operation at subfreezing temperatures, water forming at the cathode initially hydrates the membrane, then forms ice in the catalyst layer and/or GDL. This ice formation results in a gradual decay in voltage. High-frequency resistance initially decreases due to an increase in membrane water content and then increases over time as the contact resistance increases. The water/ice holding capacity of a fuel cell decreases with decreasing subfreezing temperature (-10°C vs. -20°C vs. -30°C) and increasing current density (0.02 A cm -2 vs. 0.04 A cm -2 ). Ice formation monitored using in-situ high-resolution neutron radiography indicated that the ice was concentrated near the cathode catalyst layer at low operating temperatures (≈-20°C) and high current densities (0.04 A cm -2 ). Significant ice formation was also observed in the GDLs at higher subfreezing temperatures (≈-10°C) and lower current densities (0.02 A cm -2 ). These results are in good agreement with the long-term durability observations that show more severe degradation at lower temperatures (-20°C and -30°C).

30 DIRECT ENERGY CONVERSION↗

Water-gas shift reaction on alumina-supported Pt-CeO x catalysts prepared by supercritical fluid deposition

Alumina-supported platinum catalysts, both with and without ceria, were prepared by supercritical fluid deposition and evaluated for activity for water-gas shift reaction. The organometallic precursor, platinum(II) acetylacetonate, was deposited from solution in supercritical carbon dioxide. Analysis of the catalysts by high resolution scanning transmission electron microscopy indicated that platinum was present in the form of highly dispersed metal nanoparticles. Pretreatment of the alumina-supported ceria in hydrogen prior to the deposition of the platinum precursor resulted in more platinum nucleated on ceria than non-pretreated alumina-supported ceria but varied in both particle size and structure. The ceria-containing catalyst that was not pretreated exhibited a more uniform particle size, and the Pt particles were encapsulated in crystalline ceria. Reaction rate measurements showed that the catalyst was more active for water-gas shift, with reaction rates per mass of platinum that exceeded most literature values for water-gas shift reaction on Pt-CeO x catalysts. The high activity was attributed to the significant fraction of platinum/ceria interfacial contact. We found that these results show the promise of supercritical fluid deposition as a scalable means of synthesizing highly active supported metal catalysts that offer efficient utilization of precious metals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and compositional dependence of the CdTexSe 1-x alloy layer photoactivity in CdTe-based solar cells

The published external quantum efficiency data of the world-record CdTe solar cell suggests that the device uses bandgap engineering, most likely with a CdTe x Se 1₋x alloy layer to increase the short-circuit current and overall device efficiency. Here atom probe tomography, transmission electron microscopy and electron beam-induced current are used to clarify the dependence of Se content on the photoactive properties of CdTe x Se 1₋x alloy layers in bandgap-graded CdTe solar cells. Four solar cells were prepared with 50, 100, 200 and 400 nm-thick CdSe layers to reveal the formation, growth, composition, structure and photoactivity of the CdTe x Se 1₋x alloy with respect to the degree of Se diffusion. Finally, the results show that the CdTe x Se 1₋x layer photoactivity is highly dependent on the crystalline structure of the alloy (zincblende versus wurtzite), which is also dependent on the Se and Te concentrations.

14 SOLAR ENERGY↗