Search NASA⌕ Search

Engineering topics

Morgan, Dane

Publications and source records attributed to Morgan, Dane.

10 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Flux effects in precipitation under irradiation simulation of Fe-Cr alloys

Radiation-enhanced precipitation of Cr-rich α’ in irradiated Fe-Cr alloys, which results in hardening and embrittlement, depends on the irradiating particle and the displacement per atom (dpa) rate. Here, we utilize a Cahn-Hilliard phase-field based approach, that includes simple models for nucleation, irradiating particle and rate dependent radiation-enhanced diffusion and cascade mixing to simulate α’ evolution under neutrons, heavy ions, and electron irradiations. Different irradiating particles manifest very different cascade mixing efficiencies. The model was calibrated using neutron data. For cascade inducing neutron/heavy-ion dpa rates at 300 °C between 10-8 and 10-6 dpa/s the model predicts approximately constant number density, decreasing radius, decreasing α’ Cr composition, and lower α’ volume fraction. The model then predicts a dramatic transition to no α’ formation above approximately 10-5 dpa/s, while electron irradiation, with weak mixing, had little effect at dpa rates up to 10-3 dpa/s. These model predictions are consistent with experiments. We explain the results in terms of the flux dependence of the radiation enhanced diffusion, cascade mixing, and their ratio, which all vary significantly in relevant flux ranges for neutron and cascade inducing ion irradiations. These results show that both cascade mixing and radiation enhanced diffusion must be accounted for when attempting to emulate neutron-irradiation effects using accelerated ion irradiations.

Ke, Jia-Hong↗
DOE OSTI2024

An Analytical Tool to Evaluate Defect Thermodynamics of (La,Ba)Fe1-xMxO3-δ Perovskites for Solid-Oxide Cell Applications

A modeling tool of the defect thermodynamics of (La,Ba)Fe1-xMxO3-δ perovskites which includes energetic information about oxygen vacancy formation, hydration, hydride formation, and charge disproportionation reactions has been developed1. This tool incorporates defect energies and entropies expressed as sixth order polynomial functions to allow refinements of the defect reaction equilibrium constants in the thermodynamic analysis. Calculation of (La,Ba)Fe1-xMxO3-δ Brouwer diagrams as a function of pO2/pH2O and pH2/H2O in a range of temperatures of interest is facilitated by this modeling tool. The results obtained can provide direct guidance how the electronic and ionic defect concentrations of the triple conducting perovskite materials can be used to optimize performance of solid oxide cells for energy applications. The impact of magnetic and electronic structures of the perovskites on the defect reaction energies and entropies as obtained from density function theory modeling and the role played by hydride defect species will also be discussed.

Lee, Yueh-Lin↗
DOE OSTI2024

Material Discovery and Design Principles of Perovskite Oxides for Reversible Solid Oxide Cells (R-SOC)

Reversible solid oxide cells (R-SOCs) are highly efficient devices for energy conversion and storage, capable of operating for both hydrogen utilization and production. In fuel cell mode, an R-SOC consumes hydrogen or natural gas to generate electricity, while in electrolysis mode, it produces hydrogen from steam. The discover of new materials with rapid oxygen surface exchange kinetics and enduring stability is crucial for the economically viable commercialization of R-SOCs. To facilitate this pursuit, we conducted extensive Density Functional Theory (DFT) calculations and developed Machine Learning (ML) models to predict critical catalytic properties essential for R-SOCs, such as oxygen surface exchange/diffusivity, and area-specific resistance (ASR). BaCoxFeyZrzO3-d(BFCZ)(x+y+z=1) emerged as a promising family of electrode materials with high activity and stability, validated through systematic experimental study. Moreover, a robust numerical multiphysics model was developed to optimize materials and microstructure parameters, providing the ability to predict the performance of functional R-SOCs.

Liu, Jian↗
DOE OSTI2024

Evolution of PTCDA-derived seeds prior to graphene nanoribbon growth on Ge(001)

The synthesis of graphene nanoribbons (GNRs) can be realized via CH4 chemical vapor deposition (CVD) on substrates such as Ge(001) that promote highly anisotropic growth kinetics. Small polycyclic aromatic hydrocarbons (PAHs) are first sublimed onto Ge near room temperature to form graphene-like seeds that subsequently initiate GNR growth with CH4 exposure at 1173 K. The behaviors of PAHs in the time in between their sublimation onto Ge and GNR growth are unclear. Here, we study an archetypical PAH, perylene-3,4,9,10-tetracarboxyl acid dianhydride (PTCDA), on Ge(001) using both scanning tunneling microscopy (STM) and density functional theory (DFT) to characterize PAH conformation, surface diffusivity, and clustering, versus temperature. PTCDA becomes mobile above 673 K (consistent with a DFT calculated diffusion barrier of 2.01 eV). The mobile PTCDA molecules meet, cluster, and fuse at Ge step edges. These clusters have an apparent height of 0.4 nm, similar to small graphene islands, and grow laterally with increasing temperature – reaching 1.2 – 2.1 nm in width at 1173 K, consistent with the seed size extrapolated from CVD experiments. These results provide a plausible picture for how PTCDA forms seeds for anisotropic GNR CVD and show that PAHs with reduced surface diffusivity and inter-molecular reactivity are needed to enable more monodisperse PAH-seeded GNR synthesis.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Computational discovery of fast interstitial oxygen conductors

New highly oxygen-active materials may enhance many energy-related technologies by enabling efficient oxygen-ion transport at lower temperatures, for example, below ~400 °C. Interstitial oxygen conductors have the potential to realize such performance but have received far less attention than vacancy-mediated conductors. Here, in this study, we combine physically motivated structure and property descriptors, ab initio simulations and experiments to demonstrate an approach to discover new fast interstitial oxygen conductors. Multiple new families were found, which adopt completely different structures from known oxygen conductors. From these families, we synthesized and studied oxygen kinetics in La 4 Mn 5 Si 4 O 22+δ , a representative member of the perrierite/chevkinite family. We found that La 4 Mn 5 Si 4 O 22+δ has higher oxygen-ion conductivity than the widely used yttria-stabilized ZrO 2 , and among the highest surface oxygen exchange rates at the intermediate temperature of known materials. The fast oxygen kinetics is the result of simultaneously active interstitial and interstitialcy diffusion pathways. We propose that the essential features for forming an effective interstitial oxygen conductor are the availability of electrons and structural flexibility, enabling a sufficient accessible volume. This work provides a powerful approach for understanding and discovering new interstitial oxygen conductors.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Direct evidence of low work function on SrVO 3 cathode using thermionic electron emission microscopy and high-field ultraviolet photoemission spectroscopy

Perovskite SrVO 3 has recently been proposed as a novel electron emission cathode material. Density functional theory (DFT) calculations suggest multiple low work function surfaces, and recent experimental efforts have consistently demonstrated effective work functions of ~2.7 eV for polycrystalline samples, both results suggesting, but not directly confirming, that some fraction of even lower work function surface is present. In this work, thermionic electron emission microscopy (ThEEM) and high-field ultraviolet photoemission spectroscopy (UPS) are used to study the local work function distribution and measure the work function of a partially oriented- (110)-SrVO 3 perovskite oxide cathode surface. Our results show direct evidence of low work function patches of about 2.0 eV on the cathode surface, with a corresponding onset of observable thermionic emission at 750 °C. We hypothesize that, in our ThEEM and UPS experiments, the high applied electric field suppresses the patch field effect, enabling the direct measurement of local work functions. This measured work function of 2.0 eV is comparable to the previous DFT-calculated work function values of the SrVO-terminated (110) SrVO 3 surface (2.3 eV) and SrO-terminated (100) surface (1.9 eV). The measured 2.0 eV value is also much lower than the work function for the (001) LaB 6 single crystal cathode (~2.7 eV) and comparable to the effective work function of B-type dispenser cathodes (~2.1 eV). If SrVO 3 thermionic emitters can be engineered to access domains of this low 2.0 eV work function, they have the potential to significantly improve thermionic emitter-based technologies.

36 MATERIALS SCIENCE↗