Search NASA⌕ Search

Engineering topics

Morgan, Joshua

Publications and source records attributed to Morgan, Joshua.

28 records · Page 2

Techno-Economic Analysis and Optimization of Integrated NGCC-MEA System at High CO2 Capture Levels

This poster contains preliminary results for an ongoing analysis of modeling and optimization of an NGCC plant with a solvent-based CO2 capture system with high levels of CO2 capture – up to and beyond net-zero emissions. The work was performed to understand the incremental cost of high capture in order to compare with direct-air capture and other net-negative technologies, as well as to understand optimal operation and design of the CCS unit to achieve high capture with minimal increase in cost.

Deshpande, Anuja↗

Efficient facemask decontamination via forced ozone convection

The COVID-19 crisis has taken a significant toll on human life and the global economy since its start in early 2020. Healthcare professionals have been particularly vulnerable because of the unprecedented shortage of Facepiece Respirators (FPRs), which act as fundamental tools to protect the medical staff treating the coronavirus patients. In addition, many FPRs are designed to be disposable single-use devices, creating an issue related to the generation of large quantities of non-biodegradable waste. In this contribution, we describe a plasma-based decontamination technique designed to circumvent the shortages of FPRs and alleviate the environmental problems posed by waste generation. The system utilizes a Dielectric Barrier Discharge (DBD) to generate ozone and feed it through the fibers of the FPRs. The flow-through configuration is different than canonical ozone-based sterilization methods, in which the equipment is placed in a sealed ozone-containing enclosure without any flow through the mask polymer fibers. We demonstrate the rapid decontamination of surgical masks using Escherichia coli ( E. coli ) and Vesicular Stomatitis Virus (VSV) as model pathogens, with the flow-through configuration providing a drastic reduction in sterilization time compared to the canonical approach. We also demonstrate that there is no deterioration in mask structure or filtration efficiency resulting from sterilization. Finally, we show that this decontamination approach can be implemented using readily available tools, such as a plastic box, a glass tube, few 3D printed components, and the high-voltage power supply from a plasma globe toy. The prototype assembled for this study is portable and affordable, with effectiveness comparable to that of larger and more expensive equipment.

36 MATERIALS SCIENCE↗

Application of Sequential Design of Experiments (SDoE) to Large Pilot-Scale Solvent-Based CO2 Capture Process at Technology Centre Mongstad (TCM)

The United States Department of Energy’s Carbon Capture Simulation for Industry Impact (CCSI2) program has developed a framework for sequential design of experiments (SDoE) that aims to maximize knowledge gained from budget- and schedule-limited pilot scale testing. SDoE was applied to the planning and execution of campaigns for testing CO2 capture systems at pilot-scale in order to optimally allocate resources available for the testing. In this methodology, a stochastic process model is developed by quantifying the parametric uncertainty in submodels of interest; for a solvent-based CO2 capture system, these may include physical properties and equipment performance submodels (e.g., mass transfer, interfacial area). This uncertainty is propagated through the full process model, over variable operating conditions, for estimating the resulting uncertainty in key model outputs (e.g., percentage of CO2 capture, solvent regeneration energy requirement). In developing a data collection plan, the predicted output uncertainty is incorporated into an algorithm that seeks simultaneously to select process operating conditions for which the predicted uncertainty is relatively high and to ensure that the entire space of operation is well represented. This test plan is then used to guide operation of the pilot plant at varying steady-state conditions, with resulting process data incorporated into the existing model using Bayesian inference to refine parameter distributions. The updated stochastic model, with reduced parametric uncertainty from data collected, is then used to guide additional data collection, thus the sequential nature of the experimental design. The SDoE process was implemented at the pilot test unit (12 MWe in scale) at Norway’s Technology Centre Mongstad (TCM) in a summer 2018 test campaign with aqueous monoethanolamine (MEA). During the test campaign, the varied operating conditions included the flowrates of circulated solvent, flue gas, and reboiler steam and the CO2 concentration in the flue gas. The process data were used to update probability distributions of mass transfer and interfacial area parameters of a stochastic process model developed by the CCSI2 team. Two iterations of the SDoE process were executed, resulting in the uncertainty in model predicted CO2 capture percentage decreasing by an average of 58.0 ± 4.7% over the full input space of interest. This work demonstrates the potential of the SDoE process for model refinement through reduction in process model parametric uncertainty, and ultimately risk in scale-up, in CO2 capture technology performance.

carbon capture↗

Towards improved guidelines for cost evaluation of carbon capture and storage

The white paper is an effort to draw up a set of CCS costing guidelines in three complementary areas where further guidelines and better practices are needed, and where efforts are underway to address those topics. The first area of study tackles the establishment of improved guidelines for cost evaluation of advanced low-carbon technology (such as a new CO 2 capture process or a novel power plant design). The second area of study focuses on CCS from non-power industries while the final area addresses quality assurance and uncertainty evaluations of data and models used in CCS cost analysis.

54 ENVIRONMENTAL SCIENCES↗

Ubiquitous Nuclear Threat Detection Final Report, Harvey Mudd College Engineering Clinic

The Lawrence Livermore National Labs clinic team was asked to design a repeatable, portable procedure that would incentivize participants to carry detectors that form a radiation sensor network along repeated paths, to precisely known locations and past known radioactive sources. To achieve these goals, the team designed day-long and week-long data collection procedures in the form of puzzle hunt events. The team also created an Android app in order to support this measurement campaign and foster engagement. A ground truth collection method was constructed and validated through repeated use. Information concerning effective deployment of the data-collection procedure was gathered for future iterations. Over the course of procedural testing, 6 de 17 HMC students participated and collected 250 hours of data. 3 deployments of the procedure were conducted in each semester. A total of 63 students participated and collected 300 hours of data over the year. Deployment 1: 16 students, Deployment 2: 17 students, Deployment 3: 8 users, ~18 active hours, Deployment 4: 4 students, ~10 active hours, and Deployment 5: 18 students, ~40 active hours.

42 ENGINEERING↗