Search NASA⌕ Search

Engineering topics

Morris, Christopher

Publications and source records attributed to Morris, Christopher.

At least 19 records

Development of Material Studies at the LANL UCN Facility Focusing on Actinide Hydriding and Fission Damage

The aging of as-built actinide surfaces in static and dynamic environments is a complex problem of high importance to LANL’s core mission. Many standard material science tools used to study this problem are ideal for highly controlled, lab-made samples. The goal of this work is to use ultracold neutrons to bridge the gap between lab made and as-built surface aging studies. This capability is unique to LANL and will support our core mission.

36 MATERIALS SCIENCE↗

Neutron Interferometric methods and quantum sensing

Advances in material science and engineering make it possible to access artificial materials or ‘metamaterial’ properties and structures on the length scale comparable to the wavelength of ultracold neutrons ~ 100 nm. Strong neutron scattering effects such as Anderson localization, resonance scattering may be studied in the laboratory according to our recent theoretical studies. UCN interferometry and high-resolution spectroscopy (sub-pico-electronvolt resolution) in neutronic metamaterials are examples of new experimental possibilities that can probe quantum gravitational states of neutrons, and quantum sensing based on ultracold neutrons.

36 MATERIALS SCIENCE↗

Material Control and Accounting Regulatory and Technical Considerations for Microreactors

New microreactors must comply with the Material Control and Accounting (MC&A) regulations in 10CFR74. The objective of MC&A is to verify that the nuclear material is not stolen or diverted to unauthorized users. Microreactors have unique features which pose new challenges to addressing these regulations. This work considers general approaches and methods for microreactor MC&A based on the reactor life cycles which have been proposed by microreactor vendors. One key aspect of MC&A is measurement of the nuclear material. Measurement of microreactor fuel could be especially important because the cores may be sealed for up to 20 years, preventing direct visual confirmation. Measurements could also be especially challenging due to the thick shielding designed around microreactors. This work evaluates a range of techniques used in medical, industrial, and nuclear fields. The cost, time, and performance of the techniques were estimated. Finally, for a promising technique of using in-core neutron detectors, the feasibility was analyzed in detail.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A Vertical Deburring Algorithm for Muon Tomography

Los Alamos researchers have developed a technology that improves the quality of images generated by muon tomography techniques,where naturally existing cosmic radiation is used as an energy source for identifying very dense materials. When using muon tomography,blurring can occur on the vertical aspect of images, making it more difficult to interpret data. This vertical de-blurring technology will correct these abnormalities and improve image quality for better evaluation of containers that may have dense matter such as special nuclear materials. This technology has been demonstrated in the laboratory and was evaluated in the field for efficacy.

47 OTHER INSTRUMENTATION↗

Examples of embedded markers

This document contains data from prad0348 and Prad0560, experiments in which embedded markers were used to track the velocity field behind shocked material and a detonation from respectively.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Imaging the dome of Santa Maria del Fiore using cosmic rays

The dome of Santa Maria del Fiore, Florence Cathedral, was built between 1420 and 1436 by architect Filippo Brunelleschi and it is now cracking under its own weight. Engineering efforts are under way to model the dome's structure and reinforce it against further deterioration. According to some scholars, Brunelleschi might have built reinforcement structures into the dome itself; however, the only known reinforcement is a wood chain 7.75 m above the springing of the Cupola. Multiple scattering muon radiography is a non-destructive imaging method that can be used to image the interior of the dome's wall and therefore ascertain the layout and status of any iron substructure in it. A demonstration measurement was performed at the Los Alamos National Laboratory on a mock-up wall to show the feasibility of the work proposed, and a lightweight and modular imaging system is currently under construction. Here, we will discuss here the results of the demonstration measurement and the potential of the proposed technique, describe the imaging system under construction and outline the plans for the measurement.

47 OTHER INSTRUMENTATION↗

Proton radiography measurements and models of ejecta structure in shocked Sn

We present the experimental validation of ejecta source, mass and velocity models using proton radiography. Ejecta mass and velocity measurements were performed under 7 atm of He gas on Sn targets with 4 concentric sinusoidal features with radial wavelength of λ=2 mm and amplitude η 0 = 0.159 mm. 42 images at 275 and 400 ns intervals were obtained between 0 and 14 µs from the time of shock breakout. Volume density profiles for the spikes were determined through Abel inversion and spike, bubble and surface velocities were determined using proton radiography and also verified through Photon Doppler Velocimetry (PDV). Ejecta sheets evolve to a self-similar density distribution that depends on a scaling variable z/η s t where η˙s is the spike tip velocity, z is the distance from the free surface and t is the time after shock breakout. Both the density profiles and the time dependence of the mass per unit area in the evolving spikes are in good agreement with a Richtmyer-Meshkov instability based model for ejecta production and evolution.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗