Search NASA⌕ Search

Engineering topics

Morris, D. J.

Publications and source records attributed to Morris, D. J..

24 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

An investigation of several numerical procedures for time-asymptotic compressible Navier-Stokes solutions

The status of an investigation of four numerical techniques for the time-dependent compressible Navier-Stokes equations is presented. Results for free shear layer calculations in the Reynolds number range from 1000 to 81000 indicate that a sequential alternating-direction implicit (ADI) finite-difference procedure requires longer computing times to reach steady state than a low-storage hopscotch finite-difference procedure. A finite-element method with cubic approximating functions was found to require excessive computer storage and computation times. A fourth method, an alternating-direction cubic spline technique which is still being tested, is also described.

Rudy, D. H.↗
NASA NTRS1974

Operating characteristics of the Langley Mach 10 high Reynolds number helium tunnel

Operating characteristics of the Langley Mach 10 high Reynolds number helium tunnel are presented for stagnation pressures from 138 N/sq cm to 1655 N/sq cm. The characteristics include detailed Mach number surveys in the test section from which usable core size and regions of disturbed flow were determined, preliminary blockage test results, and maximum run time to be expected at various stagnation pressures. Important tunnel dimensions including details of the model mounting apparatus are given. Measurements show the variation in average core Mach number in the test section to be between 9.4 and 10 for the present range of test conditions. The core radius is from 23 cm to 31.5 cm, depending on stagnation pressure and axial location in the test section.

Watson, R. D.↗
NASA NTRS1973

Computer programs for predicting supersonic and hypersonic interference flow fields and heating

This report describes computer codes which calculate two-dimensional shock interference patterns. These codes compute the six types of interference flows as defined by Edney (Aeronaut. Res. Inst. of Sweden FAA Rep. 115). Results include properties of the inviscid flow field and the inviscid-viscous interaction at the surface along with peak pressure and peak heating at the impingement point.

Morris, D. J.↗
NASA NTRS1972

Correlations of peak heating in shock interference regions at hypersonic speeds.

Correlations are given of measured pressure and heat-transfer peaks for shock/boundary-layer interactions and shear layer attachment on configurations with both two- and three-dimensional interactions. The peak values were obtained from an investigation of shock interference heating on hemispheres, a 30-deg included angle wedge, and a 2.54-cm-diam cylindrical leading-edge fin model. The investigation covers data for Mach numbers of 6 and 20 over freestream Reynolds numbers ranging from (3.3 to 25.6) million per meter, and specific heat ratios of 1.4 and 1.67.

Keyes, J. W.↗