Search NASA⌕ Search

Engineering topics

Morris, James R

Publications and source records attributed to Morris, James R.

At least 19 records

Microstructure-Dependent Gas Adsorption: Accurate Predictions of Methane Uptake in Nanoporous Carbons

We demonstrate a successful, efficient framework for predicting gas adsorption properties in real materials based on first-principles calculations, with a specific comparison of experiment and theory for methane adsorption in activated carbons. These carbon materials have different pore size distributions, leading to a variety of uptake characteristics. Utilizing these distributions, we accurately predict experimental uptakes and heats of adsorption without empirical potentials or lengthy simulations. We demonstrate that materials with smaller pores have higher heats of adsorption, leading to a higher gas density in these pores. This pore-size dependence must be accounted for, in order to predict and understand the adsorption behavior. The theoretical approach combines: (1) ab initio calculations with a van der Waals density functional to determine adsorbent-adsorbate interactions, and (2) a thermodynamic method that predicts equilibrium adsorption densities by directly incorporating the calculated potential energy surface in a slit pore model. The predicted uptake at P=20 bar and T=298 K is in excellent agreement for all five activated carbon materials used. This approach uses only the pore-size distribution as an input, with no fitting parameters or empirical adsorbent-adsorbate interactions, and thus can be easily applied to other adsorbent-adsorbate combinations.

Ihm, Yungok↗

Theoretical studies of Ir5Th and Ir5Ce nanoscale precipitates in Ir

Experimentally, it is known that very small amounts of thorium and/or cerium added to iridium metal form a precipitate, Ir5Th / Ir5Ce, which improves the high temperature mechanical properties of the resulting alloys. We demonstrate that there are low-energy configurations for nano-scale precipitates of these phases in Ir, and that these coherent arrangements may assist in producing improved mechanical properties. One precipitate/matrix orientation gives a particularly low interfacial energy, and a low lattice misfit. Nanolayer precipitates with this orientation are found to be likely to form, with little driving force to coarsen. The predicted morphology of the precipitates and their orientation with the matrix phase provide a potential experiment that could be used to test these predictions.

Morris, James R↗

A comparative first-principles study of martensitic phase transformations in TiPd2 and TiPd

Martensitic phase transformations in TiPd2 and TiPd alloys are studied employing density-functional, first-principles calculations. We examine the transformation of tetragonal C11b TiPd2 to the low-temperature orthorhombic phase (C11b oI6), and the transformation of cubic B2 TiPd under orthorhombic (B2 B19) and subsequent monoclinic transformations (B19 B19 ) as the system is cooled. To evaluate the transition temperature for TiPd2 we employ a theoretical approach based on a phenomenological Landau theory of the structural phase transition and a mean-field approximation for the free energy, utilizing first-principles calculations to obtain the deformation energy as a function of strains and to deduce parameters for constructing the free energy. The predicted transition temperature for the TiPd2 C11b oI6 transition temperature is in good agreement with reported experimental results. To investigate the TiPd B2 B19 transformation, we employ both the Cauchy-Born rule and a soft-mode- based approach, and elucidate on the importance of coupling of lattice distortion and atomic displacements (i.e., shuffling) in the formation of the final structure. The estimated B2 B19 transition temperature for TiPd system agrees well with the experimental results. We also find that there exists a very small but finite (0.0005 eV/atom) energy barrier of B19 TiPd under monoclinic deformation for B19 B19 structural phase transformation.

Krcmar, Maja↗

Atomic dynamics in molten AlCu alloys of different compositions and at different temperatures by cold neutron scattering

The atomic motions in molten Al1-xCux (x=0.10, 0.171 and 0.25) around the eutectic composition (x=0.171) were studied by cold neutron inelastic scattering at three different temperatures (973 K, 1173 K and 1373 K). An alloy of eutectic composition containing the 63Cu isotope was also studied. Self-diffusion coefficients for the Cu ions were determined from the width of quasielastic peaks and were found to decrease slightly with increasing Cu concentration. Longitudinal current correlation functions Jl(Q,E) exhibit at all temperatures and at all compositions a shoulder at energies below 10 meV and one main maximum at higher energies. These features can be interpreted in terms of excitations of acoustic and optic nature. The shape of Jl(Q,E) is sensitive to composition, being considerably more structured for larger Cu content. This can be coupled to the existence of a prepeak in the measured zeroth moment of dynamic scattering function indicating an increased chemical ordering with increasing Cu concentration for all temperatures. Indications for an existence of a liquid–liquid phase transition are presented.

36 MATERIALS SCIENCE↗

Modern approaches to studying gas adsorption in nanoporous carbons

Conventional approaches to understanding gas adsorption capacity of nanoporous carbons have emphasized the relationship with the effective surface area, but more recent work has demonstrated the importance of local structures and pore-size-dependent adsorption. We present some recent developments that provide new insights into local structures in nanoporous carbon and their effect on gas adsorption and uptake characteristics. Experiments and theory show that appropriately tuned pores can strongly enhance local adsorption, and that pore sizes can be used to tune adsorption characteristics. In the case of H2 adsorbed on nanostructured carbon, quasielastic and inelastic neutron scattering probes demonstrate novel quantum effects in the motion of adsorbed molecules.

Morris, James R↗

Structure and hydrogen adsorption properties in low density nanoporous carbons from simulations

We systematically model the hydrogen adsorption in nanoporous carbons over a wide range of carbon bulk densities (0.6 - 2.4 g/cm3) by using tight binding molecular dynamics simulations for the carbon structures and thermodynamics calculations of the hydrogen adsorption. The resulting structures are in good agreement with the experimental data of ultra-microporous carbon (UMC), a wood-based activated carbon, as indicated by comparisons of the microstructure at atomic level, pair distribution function, and pore size distribution. The hydrogen adsorption calculations in carbon structures demonstrate both a promising hydrogen storage capacity (excess uptake of 1.33 wt% at 298K and 5 MPa, for carbon structures at the lower range of densities) and a reasonable heat of adsorption (12-22 kJ/mol). This work demonstrates that increasing the heat of adsorption does not necessarily increase the hydrogen uptake. In fact, the available adsorption volume is as important as the isosteric heat of adsorption for hydrogen storage in nanoporous carbons.

08 HYDROGEN↗

La-driven morphotropic phase boundary in the Bi(Zn1/2Ti1/2)O3-La(Zn1/2Ti1/2)O3-PbTiO3 solid solution

We explore the Bi(Zn$_{1/2}$Ti$_{1/2}$)O$_3$-La(Zn$_{1/2}$Ti$_{1/2}$)O$_3$-PbTiO$_3$ pseudoternary phase diagram using density functional theory and a solid solution model. We find a region of stability against phase segregation that contains a morphotropic phase boundary. Based on the results we identify a ferroelectrically active composition region that is likely to show strong electro-mechanical response. Furthermore, we find that La replacement for Bi not only lowers the polarization as might be expected, but also shifts the balance from tetragonality towards rhombohedral distortions. This may be of general use in modifying phase diagrams of $A$-site driven perovskite ferroelectric solid solutions to generate new morphotropic phase boundary systems.

Cooper, Valentino R↗

The influence of dispersion interactions on the hydrogen adsorption properties of expanded graphite

We demonstrate the importance of London dispersion forces in defining the adsorption capacity within expanded graphite, a simple model of the more complex experimental geometries of activated carbon, using a combination of the non-local correlation functional of Dion et al. paired with a recent exchange functional of Cooper (vdW-DFC09x) and a classical continuum model. Our results indicate that longer ranged interactions due to dispersion forces increase the volume over which molecules interact with a porous medium. This significantly enhances the adsorption density within a material, and explains recent experimental work showing that the densification of H2 in carbon nanopores is sensitive to the pore size. Remarkably, our slit pore geometries give adsorption densities of 3 wt. % at 298 K and 20 MPa which correlates well with experimental values for 9 A pores a value that could not be predicted using (local density approximation) LDA calculations. In its entirety, this work presents a powerful approach for assessing molecular uptake in porous media and may have serious impacts on efforts to optimize the properties of these materials.

Ihm, Yungok↗

Elastic Properties of the Zintl Ferromagnet Yb14MnSb11

We report measurements of the elastic moduli as a function of temperature (5-300) K and magnetic field (0-2 T) for the Zintl ferromagnet Yb{sub 14}MnSb{sub 11}, which is believed to be a rare example of an underscreened Kondo lattice. The elastic moduli measured below the Curie temperature in this complex ferromagnet exhibit unusual lattice stiffening that is independent of the magnetic field and can be adequately modeled using the Landau theory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrogen adsorption at the graphene surface: A vdW-DF perspective

We use the recently developed van der Waals density functional (vdW-DF) along with the C09x exchange functional to explore the interactions of molecular hydrogen with a single sheet of graphene. Our calculations demonstrate the importance of the inclusion of dispersion interactions for evaluating the adsorption capacity of graphitic, sparsely packed materials. In particular we show that, although the commonly used local density approximation (LDA) exchange-correlation functional gives reasonable H$_2$-graphene separation distances, these interactions are in fact too strong and decrease too rapidly as the H$_2$-graphene distance increases. On the other hand, calculations employing the generalized gradient approximation (GGA) for exchange and correlation exhibit very little binding. The vdW-DF$^{\rm C09x}$ functional, however, gives binding very similar to benchmark second-order M$\o$ller-Plesset (MP2) theory results for the H$_2$-coronene interaction and has an appropriate long range interaction with the graphene sheet. This shortcoming of the LDA and GGA functionals is shown to have significant consequences on the overall adsorption densities of H$_2$ near the graphene, thus emphasizing the fundamental importance of properly characterizing the interactions of adsorbed molecules in porous media.

08 HYDROGEN↗

The Graphene/Graphane Interface Energy and Implications for Defects

Recent theoretical work has shown that electronic properties of graphene sheets can be systematically modified by the partial hydrogenation of the sheets. Two possible perfect and distinct graphene/graphane interfaces (called zig-zag and armchair) have very different but potentially useful electronic properties which are nevertheless likely to be affected by the presence of defects. In an effort to evaluate their relative energetics and their potential for defects, the structure and energies of the zig-zag and armchair interfaces have been computed for infinite sheets of periodically alternating stripes of graphene and graphane ribbons of various widths. The presence of an interface causes significant strains in both the graphene and graphane regions, with both shear strains and area strains typically close to 1%. The associated large strain energies may lead to defects that relieve the strain but disrupt the lattice. The energies per unit length associated with the interfaces alone are approximately 0.12 eV/ for the zig-zag interface and 0.11 eV/ for the armchair. The large misfit strains and energies suggest that formation of strain-relieving defects at the interface should be highly favorable.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In situ observation of thermal expansion of tetragonal C11b phase in Zr 2 Cu (1-x) Od x alloys

The C11b phase crystalline structure (structure type MoSi{sub 2}, space group I4/mmm) in the Zr{sub 2}Cu{sub (1-x)}Pd{sub x} (x = 0, 0.25, 0.5, 0.75 and 1) alloys was examined in situ using high temperature X-ray diffraction (HTXRD) and Rietveld refinement of the data obtained at a constant heating rate. While the cell volume increases with increasing Pd as expected by the larger atomic radii, the coefficients of thermal expansion (CTEs) do not follow a uniform trend. The bonding in the basal plane is more elastically rigid than along the c-axis for all compositions. The CTE is more anisotropic for Zr{sub 2}Pd than for Zr{sub 2}Cu, which is consistent with the first-principles calculations that illustrate the rigidity of c-axis relatively to a-axis to be the less for Zr{sub 2}Pd. The CTE of the a-axis for Zr{sub 2}Pd is in fact negative over the temperature range measured.

36 MATERIALS SCIENCE↗