Search NASA⌕ Search

Engineering topics

Morris, Laura K

Publications and source records attributed to Morris, Laura K.

Luminescence-Based Spectroelectrochemical Sensor for [Tc(dmpe)3]2+/+ (dmpe = 1,2-bis(dimethylphosphino)ethane) within a Charge-Selective Polymer Film

A spectroelectrochemical sensor consisting of an indium tin oxide (ITO) optically transparent electrode (OTE) coated with a thin film of sulfonated polystyrene-blockpoly(ethylene-ran-butylene)-block-polystyrene (SSEBS) was developed for [Tc(dmpe)3]+.. [Tc(dmpe)3]+ preconcentrated by ion-exchange into the SSEBS film after 20 min exposure to aqueous [Tc(dmpe)3]+ solution, resulting in a 14-fold increase in cathodic peak current compared to a bare OTE. Colorless [Tc(dmpe)3]+ was reversibly oxidized to colored [Tc(dmpe)3]2+ by cyclic voltammetry. Detection of [Tc(dmpe)3]2+ was accomplished by electrochemically cycling the complex between non-emissive [Tc(dmpe)3]+ and emissive [Tc(dmpe)3]2+ and monitoring the modulated emission (λexc = 532 nm; λem = 660 nm). The sensor gave a linear response over the range of 0.16 to 340.0 µM.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Absorbance-based spectroelectrochemical sensor for [Re(dmpe)3]+ (dmpe = dimethylphosphinoethane)

A spectroelectrochemical sensor was developed for [Re(dmpe)3]+ as a non radioactive analog for [Tc(dmpe)3]+. The sensor consists of an optically transparent electrode (OTE) coated with a thin film of sulfonated polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene (SSEBS). Colorless [Re(dmpe)3]+ was reversibly oxidized to [Re(dmpe)3]2+ (λmax = 530 nm). [Re(dmpe)3]+ preconcentrated by ion-exchange into the SSEBS film, resulting in a 20-fold increase in peak current compared to a bare OTE after 1 h of exposure to aqueous [Re(dmpe)3]+ solution. Detection of [Re(dmpe)3]+ at concentrations down to 2 x 10 6 M was accomplished by electrochemical modulation of the complex and monitoring absorbance by attenuated total reflectance (ATR).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spectroelectrochemical Sensor: Development and Applications

This paper is being submitted to the 215th ECS (Electrochemical Society) Meeting, San Francisco, California | May 24-29, 2009 The spectroelectrochemical sensor concept uses electrochemistry to modulate an optical signal to give improved selectivity. The sensor consists of an optically transparent electrode/waveguide coated with a thin film that preconcentrates the analyte. The sensor concept was first demonstrated with ferricyanide and later it was shown to work on a complex sample by detecting ferrocycanide in radioactive Hanford tank waste. Nafion, partially sulfonated polystyrene-block-polyethylene-ran-butylene)block-polystyrene (SSEBS), and quaternized poly(vinylpyridine) (QPVP) are examples of polymers used for the thin film. Detection limits achieved by the sensor are 10-5 to 10-8 M using change in absorbance as the mode of detection and about 10-10 M using fluorescence. A sensor has been developed for detection of [Re(dmpe)3]+ where dmpe = dimethylphosphinoethane, which serves as a nonradioactive analogue for complexes of radioactive 99Tc. Some polycyclic aromatic hydrocarbons have appropriate electrochemical and spectroscopic properties for spectroelectrochemical detection as demonstrated for 1-hydroxypyrene and its conjugate 1-hydroxypyrene-glucuronide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗