Engineering topics

Motojima, G. (ORCID:0000000155223082)

Publications and source records attributed to Motojima, G. (ORCID:0000000155223082).

5 records

DOE OSTI2024

Overview of Large Helical Device experiments of basic plasma physics for solving crucial issues in reaching burning plasma conditions

Recently, experiments on basic plasma physics issues for solving future problems in fusion energy have been performed on a Large Helical Device. There are several problems to be solved in future devices for fusion energy. Emerging issues in burning plasma are: alpha-channeling (ion heating by alpha particles), turbulence and transport in electron dominant heating helium ash exhaust, reduction of the divertor heat load. To solve these problems, understanding the basic plasma physics of (1) wave–particle interaction through (inverse) Landau damping, (2) characteristics of electron-scale (high-k) turbulence, (3) ion mixing and the isotope effect, and (4) turbulence spreading and detachment, is necessary. This overview discusses the experimental studies on these issues and turbulent transport in multi-ion plasma and other issues in the appendix.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2023

A reduced-turbulence regime in the Large Helical Device upon injection of low-Z materials powders

Abstract Recently an improved confinement regime, characterized by reduced turbulent fluctuations has been observed in the Large Helical Device upon the injection of boron powder into the plasma (Nespoli et al 2022 Nat. Phys. 18 350–56). In this article, we report in more detail the experimental observations of increased plasma temperature and the decrease of turbulent fluctuations across the plasma cross section, on an extended database. In particular, we compare powders of different materials (B, C, BN), finding similar temperature improvement and turbulence response for the three cases. Modeling of the powder penetration into the plasma and of neoclassical electric field and fluxes support the interpretation of the experimental results. Additionally, we report evidence of the temperature improvement increasing with powder injection rates and decreasing for both increasing density and heating power. Though, plasma turbulence response varies depending on the initial conditions of the plasma, making it difficult to draw an inclusive description of the phenomenon.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Overview of the TJ-II stellarator research programme towards model validation in fusion plasmas

TJ-II stellarator results on modelling and validation of plasma flow asymmetries due to on-surface potential variations, plasma fuelling physics, Alfvén eigenmodes (AEs) control and stability, the interplay between turbulence and neoclassical (NC) mechanisms and liquid metals are reported. Regarding the validation of the neoclassically predicted potential asymmetries, its impact on the radial electric field along the flux surface has been successfully validated against Doppler reflectometry measurements. Research on the physics and modelling of plasma core fuelling with pellets and tracer encapsulated solid pellet injection has shown that, although post-injection particle radial redistributions can be understood qualitatively from NC mechanisms, turbulence and fluctuations are strongly affected during the ablation process. Advanced analysis tools based on transfer entropy have shown that radial electric fields do not only affect the radial turbulence correlation length but are also capable of reducing the propagation of turbulence from the edge into the scrape-off layer. Direct experimental observation of long range correlated structures show that zonal flow structures are ubiquitous in the whole plasma cross-section in the TJ-II stellarator. Alfvénic activity control strategies using ECRH and ECCD as well as the relation between zonal structures and AEs are reported. Finally, the behaviour of liquid metals exposed to hot and cold plasmas in a capillary porous system container was investigated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Observation of a reduced-turbulence regime with boron powder injection in a stellarator

Abstract In state-of-the-art stellarators, turbulence is a major cause of the degradation of plasma confinement. To maximize confinement, which eventually determines the amount of nuclear fusion reactions, turbulent transport needs to be reduced. Here we report the observation of a confinement regime in a stellarator plasma that is characterized by increased confinement and reduced turbulent fluctuations. The transition to this regime is driven by the injection of submillimetric boron powder grains into the plasma. With the line-averaged electron density being kept constant, we observe a substantial increase of stored energy and electron and ion temperatures. At the same time, the amplitude of the plasma turbulent fluctuations is halved. While lower frequency fluctuations are damped, higher frequency modes in the range between 100 and 200 kHz are excited. We have observed this regime for different heating schemes, namely with both electron and ion cyclotron resonant radio frequencies and neutral beams, for both directions of the magnetic field and both hydrogen and deuterium plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

Plasma–surface interaction in the stellarator W7-X: conclusions drawn from operation with graphite plasma-facing components

W7-X completed its plasma operation in hydrogen with island divertor and inertially cooled test divertor unit (TDU) made of graphite. A substantial set of plasma-facing components (PFCs), including in particular marker target elements, were extracted from the W7-X vessel and analysed post-mortem. The analysis provided key information about underlying plasma–surface interactions (PSI) processes, namely erosion, transport, and deposition as well as fuel retention in the graphite components. The net carbon (C) erosion and deposition distribution on the horizontal target (HT) and vertical target (VT) plates were quantified and related to the plasma time in standard divertor configuration with edge transform ι = 5/5, the dominant magnetic configuration of the two operational phases (OP) with TDU. The operation resulted in integrated high net C erosion rate of 2.8 mg s -1 in OP1.2B over 4809 plasma seconds. Boronisations reduced the net erosion on the HT by about a factor 5.4 with respect to OP1.2A owing to the suppression of oxygen (O). In the case of the VT, high peak net C erosion of 11μm at the strike line was measured during OP1.2B which converts to 2.5 nm s -1 or 1.4 mg s -1 when related to the exposed area of the target plate and the operational time in standard divertor configuration. PSI modelling with ERO2.0 and WallDYN-3D is applied in an interpretative manner and reproduces the net C erosion and deposition pattern at the target plates determined by different post-mortem analysis techniques. This includes also the 13 C tracer deposition from the last experiment of OP1.2B with local 13 CH 4 injection through a magnetic island in one half module. The experimental findings are used to predict the C erosion, transport, and deposition in the next campaigns aiming in long-pulse operation up to 1800 s and utilising the actively cooled carbon-fibre composite (CFC) divertor currently being installed. The CFC divertor has the same geometrical design as the TDU and extrapolation depends mainly on the applied plasma boundary. Extrapolation from campaign averaged information obtained in OP1.2B reveals a net erosion of 7.6 g per 1800 s for a typical W7-X attached divertor plasma in hydrogen.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗