Environmentally Sound One-Step Solar Silicon From Natural Quartzite
This project aimed to demonstrate a new molten salt electrodeposition process to go straight from low-cost silica at $200/tonne ($40¢/kg Si basis) to polysilicon in a single step using less than 30 kWh/kg. This would eliminate the carbothermic reduction step and all direct greenhouse emissions, along with 90% of the energy. It would also eliminate the chemical hazards of chlorosilane handling which have resulted in multiple fatalities in the polysilicon industry – in Japan, the US and China. This project had the following major accomplishments: Stakeholder engagement indicated that the solar silicon market is very sensitive to price, provided quality is sufficient. The most important measure of silicon quality is not purity but carrier lifetime, as many impurities can reduce performance at concentrations too small to measure; Experiments set a baseline of current efficiency which is too low for commercial application (~3%), with electronic current ruled out as a mechanism for reduced current efficiency; A scale-up plant narrative narrative described a potential plant and formed the basis for the TEA components; TEA showed that current efficiency, large cell size, and zirconia membrane lifetime are key factors which determine capital and operating costs for the process.