Engineering topics

Moulé, Adam J.

Publications and source records attributed to Moulé, Adam J..

10 records

DOE OSTI2024

Measuring Intermolecular Excited State Geometry for Favorable Singlet Fission in Tetracene

Singlet fission (SF) is the process of converting an excited singlet to a pair of excited triplets. Harvesting two charges from a single photon has the potential to increase photovoltaic device efficiencies. Acenes, such as tetracene and pentacene, are model molecules for studying SF. Despite SF being an endoergic process for tetracene and exoergic for pentacene, both acenes exhibit near unity SF quantum efficiencies, raising questions about how tetracene can overcome the energy barrier. Here, we use recently developed instrumentation to measure inelastic neutron scattering (INS) while optically exciting the model molecules using two different excitation energies. The spectroscopic results reveal intermolecular structural relaxation due to the presence of a triplet excited state. Here, the structural dynamics of the combined excited state molecule and surrounding tetracene molecules are further studied using time-dependent density functional theory (TD-DFT), which shows that the singlet and triplet levels shift due to the excited state geometry, reducing the uphill energy barrier for SF to within kT.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Compact, portable, automatic sample changer stick for cryostats and closed-cycle refrigerators

Beamlines are facilities that produce and deliver highly focused and intense beams of radiation, typically x rays, synchrotron radiation, or neutrons, for scientific research purposes. Millions of dollars are spent annually to maintain and operate these scientific beamlines, oftentimes running continuously between cycles. To reduce human intervention and improve productivity, mechanical sample changers are often commissioned for use. Designing sample changers is difficult because mechanical parts can be bulky, expensive, and challenging to design for instruments with low volume access, high radiation, and cryogenic environments. We present a portable and inexpensive sample changer stick that can hold and manipulate up to four samples, specifically designed for use with cryogenic closed-cycle refrigerators. The sample changer stick enables rapid and efficient exchange of samples without manual intervention, and is compatible with standard sample mounts such as vanadium cans. The sample changer stick includes a motorized rotation and lancing mechanism, which enables the precise positioning of each sample in the neutron beam, while ensuring compatibility with the operating temperatures and vacuum conditions required for closed-cycle refrigerators. The design has been successfully tested at the VISION beamline at the Spallation Neutron Source. The mechanical action and software controls are detailed. Furthermore, the sample changer stick is a valuable tool for scientists working with cryogenic closed-cycle refrigerators.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Photochemistry sample sticks for inelastic neutron scattering

Every material experiences atomic and molecular motions that are generally termed vibrations in gases and liquids or phonons in solid state materials. Optical spectroscopy techniques, such as Raman, infrared absorption spectroscopy, or inelastic neutron scattering (INS), can be used to measure the vibrational/phonon spectrum of ground state materials properties. A variety of optical pump probe spectroscopies enable the measurement of excited states or elucidate photochemical reaction pathways and kinetics. So far, it has not been possible to study photoactive materials or processes in situ using INS due to the mismatch between neutron and photon penetration depths, differences between the flux density of photons and neutrons, cryogenic temperatures for INS measurements, vacuum conditions, and a lack of optical access to the sample space. These experimental hurdles have resulted in very limited photochemistry studies using INS. Here we report on the design of two different photochemistry sample sticks that overcome these experimental hurdles to enable in situ photochemical studies using INS, specifically at the VISION instrument at Oak Ridge National Laboratory. We demonstrate the use of these new measurement capabilities through (1) the in situ photodimerization of anthracene and (2) the in situ photopolymerization of a 405 nm photoresin using 405 nm excitation as simple test cases. Furthermore, these new measurement apparatus broaden the science enabled by INS to include photoactive materials, optically excited states, and photoinitiated reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Catching the Killer: Dynamic Disorder Design Rules for Small–Molecule Organic Semiconductors

Small-molecule organic semiconductors are promising materials for applications ranging from solar cells to medical sensors. Their nearly infinite design space means that, in theory, it is possible to tailor the material to the exact specifications of a particular application. In reality; however, design rules to improve mobility (μ) remain elusive because of the complex calculations required to understand its limiters. Transient localization theory posits that charge carriers are slowed down by the collective phonon motions, called dynamic disorder, which localize charge carriers temporarily. Traditionally, a mode-by-mode analysis is performed to try and identify “killer” modes. Herein, the flaws are demonstrated with this analysis and present a streamlined simulation workflow that simplifies simulation of dynamic disorder and enables engineering of new molecular structures based on phonon dynamics. This workflow is combined with a novel visualization technique that enables per-atom insights into how μ is limited. Furthermore, this workflow is applied and analyzed to a series of -acenes and a series of BTBT-based molecules. Then design rules are identified in each series that identify possible ways to improve the μ beyond current experimental limits using phonon engineering.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Elucidating correlated defects in metal organic frameworks using theory-guided inelastic neutron scattering spectroscopy

Metal organic frameworks (MOFs) that incorporate metal oxide cluster nodes, exemplified by UiO-66, have been widely studied, especially in terms of their deviations from the ideal, defect-free crystalline structures. Although defects such as missing linkers, missing nodes, and the presence of adventitious synthesis-derived node ligands (such as acetates and formates) have been proposed, their exact structures remain unknown. Previously, it was demonstrated that defects are correlated and span multiple unit cells. The highly specialized techniques used in these studies are not easily applicable to other MOFs. Thus, there is a need to develop new experimental and computational approaches to understand the structure and properties of defects in a wider variety of MOFs. Here, we show how low-frequency phonon modes measured by inelastic neutron scattering (INS) spectroscopy can be combined with density functional theory (DFT) simulations to provide unprecedented insights into the defect structure of UiO-66. We are able to identify and assign peaks in the fingerprint region (<100 cm –1 ) which correspond to phonon modes only present in certain defective topologies. Specifically, this analysis suggests that our sample of UiO-66 consists of predominantly defect-free fcu regions with smaller domains corresponding to a defective bcu topology with 4 and 2 acetate ligands bound to the Zr 6 O 8 nodes. Importantly, the INS/DFT approach provides detailed structural insights (e.g., relative positions and numbers of acetate ligands) that are not accessible with microscopy-based techniques. Furthermore, the quantitative agreement between DFT simulations and the experimental INS spectrum combined with the relative simplicity of sample preparation, suggests that this methodology may become part of the standard and preferred protocol for the characterization of MOFs, and, in particular, for elucidating the structure defects in these materials.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Quantifying Polaron Mole Fractions and Interpreting Spectral Changes in Molecularly Doped Conjugated Polymers

Molecular doping of conjugated polymers causes bleaching of the neutral absorbance and results in new polaron absorbance transitions in the mid and near infrared. In this report the concentration dependent changes in the spectra for a series of molecularly doped diketopyrrolopyrrole (DPP) co-polymers with a series of ultra-high electron affinity cyanotrimethylenecyclopropane-based dopants is analyzed. With these strong dopants the polaron mole fraction (Θ) reaches saturation. Analysis of the full spectrum enables separation of neutral and polaron signals and quantification of the polaron mole fraction using a simple noninteracting site model. The peak ratios for both neutral and polaron peaks change systematically with increasing polaron mole fraction for all measured polymers. Analysis of the spectral changes indicates that the polaron mole fraction can be quantified to within 5%. While the total change in the absorbance spectrum with increasing polaron mole fraction is linear, the lowest energy polaron peak (P1) grows nonlinearly, which indicates increased polarization/delocalization. Molecular doping of polymers that form either H- or J-aggregates shows systematically different spectral changes in the vibronic peak ratios of the neutral spectra and provides insights into the polymer configuration at undoped sites in the film.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Comparing the Expense and Accuracy of Methods to Simulate Atomic Vibrations in Rubrene

Atomic vibrations can inform about materials properties from hole transport in organic semiconductors to correlated disorder in metal–organic frameworks. Currently, there are several methods for predicting these vibrations using simulations, but the accuracy–efficiency tradeoffs have not been examined in depth. In this work, rubrene is used as a model system to predict atomic vibrational properties using six different simulation methods: density functional theory, density functional tight binding, density functional tight binding with a Chebyshev polynomial-based correction, a trained machine learning model, a pretrained machine learning model called ANI-1, and a classical forcefield model. The accuracy of each method is evaluated by comparison to the experimental inelastic neutron scattering spectrum. All methods discussed here show some accuracy across a wide energy region, though the Chebyshev-corrected tight-binding method showed the optimal combination of high accuracy with low expense. We then offer broad simulation guidelines to yield efficient, accurate results for inelastic neutron scattering spectrum prediction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Davis Computational Spectroscopy Workflow—From Structure to Spectra

Here, we describe an automated workflow that connects a series of atomic simulation tools to investigate the relationship between atomic structure, lattice dynamics, materials properties, and inelastic neutron scattering (INS) spectra. Starting from the atomic simulation environment (ASE) as an interface, we demonstrate the use of a selection of calculators, including density functional theory (DFT) and density functional tight binding (DFTB), to optimize the structures and calculate interatomic force constants. We present the use of our workflow to compute the phonon frequencies and eigenvectors, which are required to accurately simulate the INS spectra in crystalline solids like diamond and graphite as well as molecular solids like rubrene. We have also implemented a machine-learning force field based on Chebyshev polynomials called the Chebyshev interaction model for efficient simulation (ChIMES) to improve the accuracy of the DFTB simulations. We then explore the transferability of our DFTB/ChIMES models by comparing simulations derived from different training sets. We show that DFTB/ChIMES demonstrates ~100× reduction in computational expense while retaining most of the accuracy of DFT as well as yielding high accuracy for different materials outside of our training sets. The DFTB/ChIMES method within the workflow expands the possibilities to use simulations to accurately predict materials properties of increasingly complex structures that would be unfeasible with ab initio methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Computing inelastic neutron scattering spectra from molecular dynamics trajectories

Abstract Inelastic neutron scattering (INS) provides a weighted density of phonon modes. Currently, INS spectra can only be interpreted for perfectly crystalline materials because of high computational cost for electronic simulations. INS has the potential to provide detailed morphological information if sufficiently large volumes and appropriate structural variety are simulated. Here, we propose a method that allows direct comparison between INS data with molecular dynamics simulations, a simulation method that is frequently used to simulate semicrystalline/amorphous materials. We illustrate the technique by analyzing spectra of a well-studied conjugated polymer, poly(3-hexylthiophene-2,5-diyl) (P3HT) and conclude that our technique provides improved volume and structural variety, but that the classical force field requires improvement before the morphology can be accurately interpreted.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Super-Resolution Photothermal Patterning in Conductive Polymers Enabled by Thermally Activated Solubility

Doping induced solubility control (DISC) patterning is a recently developed technique which uses the change in polymer solubility upon doping, along with an optical dedoping process, to achieve high resolution optical patterning. DISC patterning is remarkable because the process resolution exceeds the linear Abbe’s diffraction limit, however, no mechanism has been proposed to explain such high resolution. Here, we use diffraction to spatially modulate the light intensity and determine the dissolution rate, revealing a superlinear dependence on light intensity, which yields features that are sharper than the profile of the writing photomask. This rate law is independent of wavelength, indicating that patterning resolution is not dominated by an optical dedoping reaction, as was previously proposed. Instead we show here that the optical patterning mechanism is primarily controlled by the thermal profile generated by the laser. To quantify this effect, the thermal profile and dissolution rate are modeled using a finite-element model and compared against patterned line cross sections as a function of wavelength, laser intensity, and dwell time. Our model reveals that although the laser-generated thermal profile is broadened considerably beyond the lasers resolution, the highly temperature dependent dissolution rate results in selective dissolution near the peak of the thermal profile. Therefore, the key factor in achieving super-resolution patterning is a strongly temperature dependent dissolution rate|a common feature of many polymers. In addition to suggesting several routes to improved resolution, our model also demonstrates that doping is not required for optical patterning of conjugated polymers, as was previously believed. Instead, we demonstrate that superlinear resolution optical patterning is attainable in any conjugated polymer simply by tuning the solvent quality during patterning, thus extending the applicability of our method to a wide class of materials. Here, we demonstrate the generality of photothermal patterning by writing sub-400 nm features into undoped Pff-BT4T-2OD.

36 MATERIALS SCIENCE↗