Search NASA⌕ Search

Engineering topics

Mous, D J. W.

Publications and source records attributed to Mous, D J. W..

Design And Performance Of A 3 MV Tandetron Accelerator System For High-Current Applications

The Saha Institute of Nuclear Physics, Kolkata, India will commission in 2011 a 3 MV Tandetron accelerator system. Hi-flux neutron production, nuclear reaction cross-section measurements and time of flight experiments are among the research activities to be performed with this system. Features such as high beam currents, high beam energy stability and low beam energy spread are necessary when conducting these types of experiments. At the same time, the beam energy must be known with high accuracy. This article reports the early results obtained during the in-house testing of the system. H beam currents of 500 {mu}A have been transported through the system. The so-called ''Q-snout'' electrode lens ensures high particle transmission ({approx}70%) through the accelerator even at 7% of the rated terminal voltage (TV). At present, the negative H ion beam current output of the SO120 multicusp ion source, rated at only 2 mA, combined with the Tandetron accelerators (with terminal voltage ranging from 1 to 6 MV) provides H beam powers of up to 10 kW.

43 PARTICLE ACCELERATORS↗

A high-current light-ion injector for tandem accelerators

A dual-source injector for tandem accelerators to produce negative ion currents of H, D, and He has been developed and built. The system consists of a central vacuum enclosure that accommodates two multicusp ion sources. Beam currents of several mA of H{sup -} and D{sup -} have been obtained by direct negative extraction of one of the multicusp ion sources. The yield for He{sup -} was optimized applying differentially pumped vacuum sections that support space compensation in the He{sup +} transport section a well as low neutralization loss of He{sup -} after charge exchange. In addition, an optimized extraction geometry and beam transport system enabled in excess of 10 mA He{sup +} within the low acceptance of the charge exchange canal. Early measurements yielded {approx}50 {mu}A for He{sup -} using Li as a charge exchange medium, but currents over 100 {mu}A are anticipated if Na would be used.

43 PARTICLE ACCELERATORS↗

Accelerator System Development at High Voltage Engineering

Throughout the years, HVE has continuously extended the capabilities of its accelerator systems to meet the rising demands from a diverse field of applications, among which are deep level ion implantation, micro-machining, neutron production for biomedical research, isotope production or accelerator mass spectrometry. Characteristic for HVE accelerators is the coaxial construction of the all solid state power supply around the acceleration tubes. With the use of solid state technology, the accelerators feature high stability and very low ripple. Terminal voltages range from 1 to 6 MV for HVE Singletrons and Tandetrons. The high-current versions of these accelerators can provide ion beams with powers of several kW. In the last years, several systems have been built with terminal voltages of 1.25 MV, 2 MV and 5 MV. Recently, the first system based on a 6 MV Tandetron has passed the factory tests. In this paper we describe the characteristics of the HVE accelerator systems and present as example recent systems.

43 PARTICLE ACCELERATORS↗