Search NASA⌕ Search

Engineering topics

Munk, Max M

Publications and source records attributed to Munk, Max M.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1927

The aerodynamic characteristics of seven frequently used wing sections at full Reynolds number

This report contains the aerodynamic properties of the wing sections U.S.A. 5, U.S.A. 27, U.S.A. 35 A, U.S.A. 35 B, Clark Y, R.A.F. 15, and Gottingen 387, as determined at various Reynolds numbers up to an approximately full scale value in the variable density wind tunnel of the National Advisory Committee for Aeronautics. It is shown that the characteristics of the wings investigated are affected greatly and in a somewhat erratic manner by variation of the Reynolds number. In general there is a small increase in maximum lift and an appreciable decrease in drag at all lifts.

Munk, Max M↗
NASA NTRS1927

The air forces on a systematic series of biplane and triplane cellule models

The air forces on a systematic series of biplane and triplane cellule models are the subject of this report. The test consist in the determination of the lift, drag, and moment of each individual airfoil in each cellule, mostly with the same wing section. The magnitude of the gap and of the stagger is systematically varied; not, however, the decalage, which is zero throughout the tests. Certain check tests with a second wing section make the tests more complete and conclusions more convincing. The results give evidence that the present army and navy specifications for the relative lifts of biplanes are good. They furnish material for improving such specifications for the relative lifts of triplanes. A larger number of factors can now be prescribed to take care of different cases.

Munk, Max M↗
NASA NTRS1926

The spacing of orifices for the measure of pressure distributions

The following report has been prepared for publication by the NACA. Suitable locations of orifices for the measurement of pressure distributions have been discussed. Tables are given for quickly laying out these locations and for quickly and easily computing the resultant air forces from the result of the measurements.

Munk, Max M↗
NASA NTRS1926

Preliminary wing model tests in the variable density wind tunnel of the National Advisory Committee for Aeronautics

This report contains the results of a series of tests with three wing models. By changing the section of one of the models and painting the surface of another, the number of models tested was increased to five. The tests were made in order to obtain some general information on the air forces on wing sections at a high Reynolds number and in particular to make sure that the Reynolds number is really the important factor, and not other things like the roughness of the surface and the sharpness of the trailing edge. The few tests described in this report seem to indicate that the air forces at a high Reynolds number are not equivalent to respective air forces at a low Reynolds number (as in an ordinary atmospheric wind tunnel). The drag appears smaller at a high Reynolds number and the maximum lift is increased in some cases. The roughness of the surface and the sharpness of the trailing edge do not materially change the results, so that we feel confident that tests with systematic series of different wing sections will bring consistent results, important and highly useful to the designer.

Munk, Max M↗
NASA NTRS1926

Model tests with a systematic series of 27 wing sections at full Reynolds number

A systematic series of 27 wing sections, characterized by a small travel of the center or pressure, have been investigated at 20 atmospheres pressure in the variable density wind tunnel of the National Advisory Committee for Aeronautics. The results are consistent with each other, and indicate that for such "stable" sections a small effective camber, a small effective S-shape and a thickness of 8 to 12 per cent lead to good aerodynamic properties.

Munk, Max M↗
NASA NTRS1926

The Air Forces on a Model of the Sperry Messenger Airplane Without Propeller

This is a report on a scale effect research which was made in the variable-density wind tunnel of the National Advisory Committee for Aeronautics at the request of the Army Air Service. A 1/10 scale model of the sperry messenger airplane with USA-5 wings was tested without a propeller at various Reynolds numbers up to the full scale value. Two series of tests were: the first on the original model which was of the usual simplified construction, and the second on a modified model embodying a great amount of detail. The experimental results show that the scale effect is almost entirely confined to the drag. It was also found that the model should be geometrically similar to the full-scale airplane if the test data are to be directly applicable to full scale.

Munk, Max M↗
NASA NTRS1926

The Variable Density Wind Tunnel of the National Advisory Committee for Aeronautics

This report contains an exact description of the new wind tunnel of the National Advisory Committee for Aeronautics. This is the first american type wind tunnel. It differs from ordinary wind tunnels by its being surrounded by a strong steel shell, 35 feet long and 15 feet in diameter. A compressor system is provided to fill this shell - and hence the entire wind tunnel - with air compressed to a density up to 25 times the ordinary atmospheric density. It is demonstrated in the report that the increase of the air density makes up for a corresponding decrease in the scale of the model. Hence such american type wind tunnel is free from scale effect. The report is illustrated by many drawings and photographs. All construction details are described, and many dimensions given. The method of conducting tests is also described and some preliminary results given in the report. So far, the tests have confirmed the chief feature of this wind tunnel - absence of scale effect.

Munk, Max M↗
NASA NTRS1925

Determination and classification of the aerodynamic properties of wing sections

The following note, prepared for the NACA, contains several remarks on the possible improvement of the experimental determination of the aerodynamic properties of wing sections. It shows how errors of observation can subsequently be partially eliminated, and how the computation of the maxima or minima of aerodynamic characteristics can be much improved.

Munk, Max M↗
NASA NTRS1925

Note on the air forces on a wing caused by pitching.

The following contains information on the air forces on a wing produced by it's pitching at a finite rate of angular velocity. The condition of smooth flow at the region of the trailing edge is maintained. The wing then experiences the same lift as if moving with the momentary velocity of the rear edge.

Munk, Max M↗
NASA NTRS1925

Model Tests on the Economy and Effectiveness of Helicopter Propellers

The average velocity of helicopter blades relative to the air is greater than that of airplane wings. The helicopter may turn out to be more economical than the airplane wing for extreme velocities of horizontal flight, the airplane then requiring a very great speed range.

PROPELLERS - HELICOPTER↗
NASA NTRS1925

Elements of the Wing Section Theory and of the Wing Theory

This report contains those results of the theory of wings and of wing sections which are of immediate practical value. They are proved and demonstrated by the use of the simple conceptions of "kinetic energy" and "momentum" only, familiar to every engineer; and not by introducing "isogonal transformations" and "vortices," which latter mathematical methods are not essential to the theory and better are used only in papers intended for mathematicians and special experts.

Munk, Max M↗
NASA NTRS1924

Some tables of the factor of apparent additional mass

This note, prepared for publication by the National Advisory Committee for Aeronautics, is a collection of the tables of the factor of apparent mass that have been published up to now. The theory of the motion of solids in a perfect fluid is of the greatest value for the study of most aerodynamic problems, and the additional apparent mass of an immersed solid is the most important characteristic for such theoretical numerical computations. It will therefore be helpful to have the most important values of the apparent mass - for some elementary cases - collected in a convenient form.

Munk, Max M↗
NASA NTRS1924

On the distribution of lift along the span of an airfoil with displaced ailerons

The effect of an aileron displacement on the distribution of the lift along the span is computed for an elliptic wing of aspect ratio 6 for three conditions. The lift distribution caused by the aileron displacement is uniform and extends normally beyond the inner end of the ailerons. Hence, the displacement of an aileron with constant chord length may bring about passing the stalling point of the adjacent wing sections, if these were near this point before. Hence, such ailerons can become ineffective at low speeds. Tapering the aileron towards the inside suggests itself as a remedy.

Munk, Max M↗
NASA NTRS1924

Remarks on the Pressure Distribution over the Surface of an Ellipsoid, Moving Translationally Through a Perfect Fluid

This note, prepared for the National Advisory Committee for Aeronautics, contains a discussion of the pressure distribution over ellipsoids when in translatory motion through a perfect fluid. An easy and convenient way to determine the magnitude of the velocity and of the pressure at each point of the surface of an ellipsoid of rotation is described. The knowledge of such pressure distribution is of great practical value for the airship designer. The pressure distribution over the nose of an airship hull is known to be in such good agreement with the theoretical distribution as to permit basing the computation of the nose stiffening structure on the theoretical distribution of pressure.

Munk, Max M↗