Search NASA⌕ Search

Engineering topics

Munoz, B

Publications and source records attributed to Munoz, B.

Influence of Interfaces and Doping on the Crystallization Temperature of Ge-Sb

The crystallization temperature Tx of the phase change material Ge-Sb as a function of film thickness and cladding material was measured using time-resolved x-ray diffraction. For films >5 nm, a weak influence of the cladding material on Tx was found (increase for Si, SiN, Pt, SiC, and TiN and decrease for Al and W). For very thin films, however, Tx differed up to 200?C. Doping of Ge-Sb with these materials led to an increase in Tx in all cases, up to a maximum of 180?C for SiN. Such a large influence of interfaces and doping on Tx is of great technological importance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phase Transitions in Ge-Te Phase Change Materials Studied by Time-resolved X-ray Diffraction

Resistivity versus temperature measurements and time-resolved x-ray diffraction were used to study Ge-Te phase change materials. Resistivity versus temperature measurements showed one sharp drop in resistivity for films with 30, 50, and 70 at.?% Ge, two steps for films with 40 at.?% Ge, and a gradual transition for films with 60 at.?% Ge. Films with 30, 50, and 70 at.?% Ge crystallized in a single-step process with GeTe and Te, only GeTe, and GeTe and Ge diffraction peaks, respectively. Films with 40 and 60 at.?% Ge crystallized in a two-step process with GeTe peaks appearing first and additional Te or Ge peaks, respectively, appearing at higher temperature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phase Change Materials and Their Application to Random Access Memory Technology

Phase change materials can exist in two different phases, the amorphous and the crystalline phase, which exhibit distinctly different physical properties. It is possible to repeatedly switch the state of these materials, from the amorphous phase to the crystalline phase by heating the material above its crystallization temperature, and from the crystalline to the amorphous phase by melt-quenching. Phase change materials have been utilized very successfully in all modern optical re-writable storage media such as CDs, DVDs and Blu-ray disks. Recently, they have also been applied to solid-state memory devices where their large difference in electrical resistivity is used to store information. This paper reviews the unique properties of phase change materials in particular as they are important for their application to these devices.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗