Search NASASearch

Engineering topics

Muntz, E. P.

Publications and source records attributed to Muntz, E. P..

The MEMS Knudsen Compressor as a Vacuum Pump for Space Exploration Applications

Several lander, probe and rover missions currently under study at the Jet Propulsion Laboratory (JPL) and especially in the Microdevices Laboratory (MDL) Center for Space Microelectronics Technology, focus on utilizing microelectromechanical systems (MEMS) based instruments for science data gathering. These small instruments and NASA's commitment to "faster, better, cheaper" type missions has brought about the need for novel approaches to satisfying mission requirements. Existing in-situ instrument systems clearly lack novel and integrated methods for satisfying their vacuum needs. One attractive candidate for a MEMS vacuum pump is the Knudsen Compressor, which operates based on thermal transpiration. Thermal transpiration describes gas flows induced by temperature differences maintained across orifices, porous membranes or capillary tubes under rarefied conditions. This device has two overwhelmingly attractive features as a MEMS vacuum pump - no moving parts and no fluids. An initial estimate of a Knudsen Compressor's pumping power requirements for a surface atmospheric sampling task on Mars is less than 80 mW, significantly below than alternative pumps. Due to the relatively low energy use for this task and the applicability of the Knudsen Compressor to other applications, the development of a Knudsen Compressor utilizing MEMS fabrication techniques has been initiated. This paper discusses the initial fabrication of a single-stage MEMS Knudsen Compressor vacuum pump, provides performance criteria such as pumping speed, size, energy use and ultimate pressure and details vacuum pump applications in several MDL related in-situ instruments.

Vargo, S. E.

A facility to produce an energetic, ground state atomic oxygen beam for the simulation of the Low-Earth Orbit environment

Because of the continuing commitment to activity in low-Earth orbit (LEO), a facility is under development to produce energetic atmospheric species, particularly atomic oxygen, with energies ranging from 5 to 80 eV. This relatively high flux facility incorporates an ion engine to produce the corresponding specie ion which is charge exchanged to produce a neutral atomic beam. Ion fluxes of around 10(exp 15) sec(exp -1) with energies of 20-70 eV have been achieved. A geometrically augmented inertially tethered charge exchanger (GAITCE) was designed to provide a large column depth of charge exchange gas while reducing the gas load to the low pressure portion of the atomic beam facility. This is accomplished using opposed containment jets which act as collisional barriers to the escape of the dense gas region formed between the jets. Leak rate gains to the pumping system on the order of 10 were achieved for moderate jet mass flows. This system provides an attractive means for the charge exchange of atomic ions with a variety of gases to produce energetic atomic beams.

Ketsdever, Andrew D.

Transient motion of a confined rarefied gas due to wall heating or cooling

The direct Monte Carlo method is used to simulate the transient motion of a confined rarefied gas as a container wall is rapidly heated or cooled. Results show that, for the rapid wall temperature changes, the gas response is better measured by an acoustic, rather than conduction, timescale, with steady state conditions being achieved after about ten wave crossing times.

Wadsworth, Dean C.

A code validation strategy and facility for nonequilibrium, reacting flows

The rotational and vibrational population distributions in a hypersonic flow of hot iodine vapor were investigated using a pilot wind tunnel. The tunnel provides run times of about 20 min, with a scale-up to a larger facility appearing to be possible. It will provide a 20-cm-diameter, Mach 9 flow of iodine vapor with only small amounts of free stream nonequilibrium. An analysis of the flow response to a normal shock wave indicates that significant chemistry will occur in model flow fields in the larger facility.

Muntz, E. P.

An iodine hypersonic wind tunnel for the study of nonequilibrium reacting flows

A pilot scale hypersonic wind tunnel operating on pure iodine vapor has been designed and tested. The wind tunnel operates intermittently with a run phase lasting approximately 20 minutes. Successful recirculation of the iodine used during the run phase has been achieved but can be improved. Relevant issues regarding the full scale facility's design and operation, and the use of iodine as a working gas are discussed. Continuous wave laser induced fluorescence was used to monitor number densities within the plume flowfield, while pulsed laser induced fluorescence was used in an initial attempt to measure vibrational energy state population distributions. Preliminary nozzle flow calculations based on finite rate chemistry are presented.

Pham-Van-diep, G. C.

Testing continuum descriptions of low-Mach-number shock structures

Numerical experiments have been performed on normal shock waves with Monte Carlo Direct Simulations (MCDS's) to investigate the validity of continuum theories at very low Mach numbers. Results from the Navier-Stokes and the Burnett equations are compared to MCDS's for both hard-sphere and Maxwell gases. It is found that the maximum-slope shock thicknesses are described equally well (within the MCDS computational scatter) by either of the continuum formulations for Mach numbers smaller than about 1.2. For Mach numbers greater that 1.2, the Burnett predictions are more accurate than the Navier-Stokes results. Temperature-density profile separations are best described by the Burnett equations for Mach numbers greater than about 1.3. At lower Mach numbers the MCDS scatter is too great to differentiate between the two continuum theories. For all Mach numbers above one, the shock shapes are more accurately described by the Burnett equations.

Pham-Van-diep, Gerald C.

Effect of the rotational-vibrational excitation on molecular diameters

The kinetic molecular diameters of rotationally and vibrationally excited diatomic molecules and molecular ions are derived as functions of the rotational and vibrational quantum numbers of the molecules. Typical molecular diameters are studied in two cases: in low-temperature gas, where the molecular diameter is independent of the degree of rotational-vibrational excitation of the molecules, and in high-temperature gas, where the molecular diameter depends on the degree of rotational-vibrational excitation of the molecules. The rotational-vibrational excitation of molecules is shown to have a meaningful effect on the collisional properties of gases. The effect is stronger in gases of weakly-bound molecules.

Kang, S. H.

A review of the kinetic detail required for accurate predictions of normal shock waves

Several aspects of the kinetic models used in the collision phase of Monte Carlo direct simulations have been studied. Accurate molecular velocity distribution function predictions require a significantly increased number of computational cells in one maximum slope shock thickness, compared to predictions of macroscopic properties. The shape of the highly repulsive portion of the interatomic potential for argon is not well modeled by conventional interatomic potentials; this portion of the potential controls high Mach number shock thickness predictions, indicating that the specification of the energetic repulsive portion of interatomic or intermolecular potentials must be chosen with care for correct modeling of nonequilibrium flows at high temperatures. It has been shown for inverse power potentials that the assumption of variable hard sphere scattering provides accurate predictions of the macroscopic properties in shock waves, by comparison with simulations in which differential scattering is employed in the collision phase. On the other hand, velocity distribution functions are not well predicted by the variable hard sphere scattering model for softer potentials at higher Mach numbers.

Muntz, E. P.

Nonequilibrium molecular motion in a hypersonic shock wave

Molecular velocities have been measured inside a hypersonic, normal shock wave, where the gas experiences rapid changes in its macroscopic properties. As first hypothesized by Mott-Smith, but never directly observed, the molecular velocity distribution exhibits a qualitatively bimodal character that is derived from the distribution functions on either side of the shock. Quantitatively correct forms of the molecular velocity distribution function in highly nonequilibrium flows can be calculated, by means of the Direct Simulation Monte Carlo technique.

Pham-Van-diep, G.

Liquid droplet generation

A pre-prototype segment of a droplet sheet generator for a liquid droplet radiator was designed, constructed and tested. The ability to achieve a uniform, non-diverging droplet sheet is limited by manufacturing tolerances on nozzle parallelism. For an array of 100, 100 micrometer diameters nozzles spaced 5 stream diameters apart, typical standard deviations in stream alignment were plus or minus 10 mrad. The drop to drop fractional speed variations of the drops in typical streams were similar and independent of position in the array. The absolute value of the speed dispersion depended on the amplitude of the disturbance applied to the stream. A second generation preliminary design of a 5200 stream segment of a droplet sheet generator was completed. The design is based on information developed during testing of the pre-prototype segment, along with the results of an acoustical analysis for the stagnation cavity pressure fluctuations used to break-up the streams into droplets.

Muntz, E. P.

A review of detailed comparisons between experiments and DSMC calculations in nonequilibrium flows

Results are reviewed from several sources on a detailed validation by experiment of the DSMC technique for the prediction of nonequilibrium flows of monatomic gases. The validation is used as a basis for using the DSMC technique to conduct numerical experiments in low Mach number shock waves to investigate the Mach number limits on the applicability of the Navier-Stokes equations. It is noted that sufficient data exist to undertake a similar, initial validation of nonequilibrium flows of nitrogen to study details of rotational energy transfer.

Erwin, D. A.

Rarefied gas dynamics

The current state of those aspects of rarefied gas dynamics research that appear to be most important to research planned over the next decade is evaluated. These aspects encompass assessments of computational rarefied-gas dynamics (CRGD) that will allows their use as surrogates for experiments, the development of hybris-flowfield computational techniques matching continuum computations with particle computations, and the validation of CRGD through the results of experimental studies of Knudsen layers in simple flows. The design of surfaces for the achievement of stable, low-momentum and thermal accommodation coefficients will be a major priority, together with theorization and experimentation on evaporation and condensation effects close to surfaces.

Muntz, E. P.

Transient and steady inertially tethered clouds of gas in a vacuum

The generation, formation, and dissipation of a transient cloud of gas produced by a multiorifice ring jet are experimentally studied, and the results are compared to a long-term steady-state flow. The transient case is related to the steady-state case by comparison of their respective number density distributions in the flowfield. The shapes of the clouds are also observed and compared to the shape of the theoretical collisionless cloud. The results indicate that the steady-state cloud is concentrated into a smaller volume than the transient cloud, which tends to spread out farther radially as well as upstream. These differences seem to indicate that a surprisingly long time is required to attain steady flow, which may be due to a long-term buildup of collision products.

Farnham, Tony L.

A pulsed electron-photon fluorescence diagnostic technique for temperature and specie concentration measurement at points in relatively dense, unseedded air flows

An analysis is presented on the use of the fluorescence stimulated by combined pulsed electron and photon beams for the study of gas flows up to densities equivalent to an altitude of about 20 km (number density of about 3 x 10 to the 18th/cu cm). The electron beam acts as a pump, requiring no seed gas, to provide a localized concentration of ions or excited state neutrals that can be probed by saturation optical pulses. A short pulse (10ns) electron beam can be used by itself to provide effectively quench-free emission up to number densities of around 10 to the 18th/cm, but is is difficult to maintain satisfactory spatial resolution at this high density. The use of a nearly simultaneous strong optical pulse increases the flexibility of the diagnostic technique, permitting use at densities greater than 10 to the 18th/cu cm with good spatial resolution. The use of flash X-ray sources combined with optical probing also appears promising for densities above 10 to the 19th/cu cm.

Muntz, E. P.

The design and performance of a multi-stream droplet generator for the liquid droplet radiator

Results are presented for the performance capabilities of a multistream droplet generator suitable for use in a spacecraft liquid droplet radiator heat-rejection system. The nozzle-motion mode of stream perturbation initiation was tested with a single droplet stream and found to produce data similar to those generated with the resonant cavity mode of perturbation. Tests then proceeded to a 26-orifice array; the streams of the array responded to the perturbation satisfactorily, forming uniformly separated drops.

Orme, Melissa