Search NASA⌕ Search

Engineering topics

Murakami, M

Publications and source records attributed to Murakami, M.

Analytical model for interaction of short intense laser pulse with solid target

A simple but comprehensive two-dimensional analytical model for the interaction of a normally incident short intense laser pulse with a solid-density plasma is proposed. Electron cavitation near the target surface by the laser ponderomotive force induces a strong local electrostatic charge-separation field. The cavitation makes possible mode conversion of the laser light into longitudinal electron oscillation at laser frequency, even for initial normal incidence of laser pulse. The intense charge-separation field in the cavity can significantly enhance the laser induced uxB electron oscillation at twice laser frequency to density levels even higher than that of the initial target.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Guiding of intense laser pulse in uniform plasmas and preformed plasma channels

Guiding of laser pulse in uniform plasmas and preformed plasma channels is investigated. The self-guiding mechanisms for these two cases are quite different. It is found that an intense laser pulse can be steadily self-guided in underdense plasmas with nearly a constant spot size if the self-consistently generated electron cavity has a sufficiently steep density gradient at the edge. In a preformed plasma channel, however, laser guiding is maintained mainly by the balance between the light diffraction and focusing. The latter is induced by the wall plasmas which greatly reduce the local dielectric constant. It is shown that the self-guiding of a laser pulse in uniform plasmas requires tens of terawatts power, but those that are in preformed channels can be realized with only a terawatt power.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Reduction in the energy loss of 0.5-MeV-per-atom carbon-cluster ions in thin carbon foils

We have precisely measured the energy loss of carbon cluster ions C{sub n}{sup +} with a kinetic energy of 0.5 MeV/atom. The measured energies, lost in a thin carbon foil by cluster ions, are lower than that of an atomic ion with the equivalent speed [{Delta}E(C{sub n}{sup +})/n<{Delta}E(C{sup +})], whereas most existing experimental results show the opposite trend with kinetic energies higher than 2.0 MeV/atom. The experimental values are compared with the calculated ones, which take into account the effect of the Coulomb force, polarization force, and reduction in the cluster average charge on the response of a solid. The agreement between the measured and calculated energy losses indicates that the reduction in the energy loss is due to a structural correlation in electron excitation during the passage of the cluster.

74 ATOMIC AND MOLECULAR PHYSICS↗

Optimization of irradiation configuration in laser fusion utilizing self-organizing electrodynamic system

A simple numerical method to determine an optimum beam configuration for highly uniform irradiation is proposed for direct-drive laser fusion systems and is applied to an arbitrary number of laser beams, N{sub B}. Driven by the Coulomb repulsion force, N{sub B} randomly distributed like charges move on a spherical surface to settle with a stable configuration having the minimum Coulomb energy for the system. Such resultant charge configurations practically do not depend on the initial conditions, and thus the solutions are very robust and unique. The irradiation uniformity is numerically assessed by overlapping N{sub B} beam patterns and calculating the laser absorption based on various spatial absorption patterns for the individual beams. The present method provides some improved illumination configurations for laser fusion compared with previously proposed designs. In particular, new coordinates for N{sub B}=48 and 72 are found to give an extraordinarily higher uniformity than for other numbers of N{sub B}. The influence of system imperfection on the irradiation uniformity is also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Laser-driven quasimonoenergetic proton burst from water spray target

A narrow band proton bursts at energies of 1.6{+-}0.08 MeV were observed when a water spray consisting of (150 nm)-diameter droplets was irradiated by an ultrashort laser pulse of about 45 fs duration and at an intensity of 5x10{sup 19} W/cm{sup 2}. The results are explained by a Coulomb explosion of sub-laser-wavelength droplets composed of two ion species. The laser prepulse plays an important role. By pre-evaporation of the droplets, its diameter is reduced so that the main pulse can interact with a smaller droplet, and this remaining bulk can be ionized to high states. In the case of water, the mixture of quite differently charged ions establishes an 'iso-Coulomb-potential' during the droplet explosion such that protons are accelerated to a peak energy with a narrow energy spread. The model explains this crucial point, which differs critically from usual Coulomb explosion or ion sheath acceleration mechanisms.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Illumination uniformity of a capsule directly driven by a laser facility with 32 or 48 directions of irradiation

The uniformity of the illumination of a spherical capsule directly driven by laser beams has been assessed numerically. Two schemes characterized by 32 and 48 directions of irradiation with associated a single laser beam or a bundle of laser beams characterized by a super-Gaussian intensity profile are considered. The calculations take into account beam imperfections as power imbalance and pointing errors. It is found that the optimum laser intensity profile, which minimizes the illumination uniformity, depends on the beams' imperfections. A comparison between both schemes shows that the 48 beams configuration allows better illumination uniformity than the 32 beams' configuration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Acceleration to high velocities and heating by impact using Nike KrF laser

The Nike krypton fluoride laser [S. P. Obenschain, S. E. Bodner, D. Colombant, et al., Phys. Plasmas 3, 2098 (1996)] is used to accelerate planar plastic foils to velocities that for the first time reach 1000 km/s. Collision of the highly accelerated deuterated polystyrene foil with a stationary target produces approxGbar shock pressures and results in heating of the foil to thermonuclear temperatures. The impact conditions are diagnosed using DD fusion neutron yield, with approx10{sup 6} neutrons produced during the collision. Time-of-flight neutron detectors are used to measure the ion temperature upon impact, which reaches 2-3 keV.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the Fielding of a High Gain, Shock-Ignited Target on the National Ignitiion Facility in the Near Term

Shock ignition, a new concept for igniting thermonuclear fuel, offers the possibility for a near-term ({approx}3-4 years) test of high gain inertial confinement fusion on the National Ignition Facility at less than 1MJ drive energy and without the need for new laser hardware. In shock ignition, compressed fusion fuel is separately ignited by a strong spherically converging shock and, because capsule implosion velocities are significantly lower than those required for conventional hotpot ignition, fusion energy gains of {approx}60 may be achievable on NIF at laser drive energies around {approx}0.5MJ. Because of the simple all-DT target design, its in-flight robustness, the potential need for only 1D SSD beam smoothing, minimal early time LPI preheat, and use of present (indirect drive) laser hardware, this target may be easier to field on NIF than a conventional (polar) direct drive hotspot ignition target. Like fast ignition, shock ignition has the potential for high fusion yields at low drive energy, but requires only a single laser with less demanding timing and spatial focusing requirements. Of course, conventional symmetry and stability constraints still apply. In this paper we present initial target performance simulations, delineate the critical issues and describe the immediate-term R&D program that must be performed in order to test the potential of a high gain shock ignition target on NIF in the near term.

42 ENGINEERING↗

Present status and future prospect of Fast Ignition Realization Experiment (FIREX) Project at ILE, Osaka

Thermonuclear ignition and subsequent burn are key physics for achieving laser fusion. In fast ignition, a highly compressed fusion fuel generated with multiple ns-laser beams is rapidly heated with a large energy, ps-laser pulse in prior to core disassembly. This scheme has a high potential to achieve ignition and burn since driver energy required for high fusion gain is predicted to be about one tenth of that needed for the central ignition scheme. In Japan, Fast Ignition Realization Experiment (FIREX) project has been started to clarify the physics of energy transport and deposition in the core plasma and to demonstrate fuel temperature of above 5 keV. After the success, FIREX-I will be followed by the second phase of the project (FIREX-II) to demonstrate ignition and burn. LFEX laser, designed to deliver a laser pulse of 10 kJ in 10 ps, are operational and the first phase of FIREX experiments has been stated. A new target is proposed to attain dense compression of fuel and improve laser-core coupling efficiency by adopting double-cone structure, a low-density inner liner, low-Z outer coating, and Br-doped fuel shell. In this paper, present status and near term prospects of the FIREX-I project will be reported together with activities on target designing, laser development, and plasma diagnostics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Evidence for Fast-Ion Transport by Microturbulence

Cross-field diffusion of energetic ions by microturbulence is measured during neutral-beam injection into the DIII-D tokamak. Fast-ion D{sub {alpha}}, neutron, and motional Stark effect measurements diagnose the fast-ion distribution function. As expected for transport by plasma turbulence, anomalies relative to the classical prediction are greatest in high temperature plasmas, at low fast-ion energy, and at larger minor radius. Theoretical estimates of fast-ion diffusion are comparable to experimental levels.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Efficient generation of quasimonoenergetic ions by Coulomb explosions of optimized nanostructured clusters

Coulomb explosion of spherical ion clusters is studied, which are composed of homogeneous two-species (light and heavy) ions. A simple analytical model is developed to describe the explosion performance in terms of two dimensionless parameters, the charge-over-mass ratio, and the charge density ratio. One-dimensional kinetic numerical model is performed to compare with the analytical model and to evaluate the energy coupling efficiency of quasimonoenergetic ion generation. It is crucial to preform an iso-Coulomb-potential profile of the light ions in the cluster for efficient generation of quasimonoenergetic ions. By controlling the radial density profiles of the light and heavy ions, the overall coupling efficiency (equal to the summed kinetic energy of the light ions in the highest 1% energy band divided by total kinetic energy of both ions) is optimized to be >30%-40% when about 90% of the total number of light ions is contained in the thin 1% energy band.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Validation of on- and off-axis neutral beam current drive against experiment in DIII-D

Neutral beam current drive (NBCD) experiments in DIII-D using vertically shifted plasmas to move the current drive away from the axis have clearly demonstrated robust off-axis NBCD. Time-dependent measurements of magnetic field pitch angles by the motional Stark effect diagnostic are used to obtain the evolution of the poloidal magnetic flux, which indicates a broad off-axis NBCD profile with a peak at about half the plasma minor radius. In most cases, the measured off-axis NBCD profile is consistent with calculations using an orbit-following Monte Carlo code for the beam ion slowing down including finite-orbit effects provided there is no large-scale magnetohydrodynamic activity such as Alfven eigenmodes modes or sawteeth. An alternative analysis method shows good agreement between the measured pitch angles and those from simulations using transport-equilibrium codes. Two-dimensional image of Doppler-shifted fast ion D{sub {alpha}} light emitted by neutralized energetic ions shows clear evidence for a hollow profile of beam ion density, consistent with classical beam ion slowing down. The magnitude of off-axis NBCD is sensitive to the alignment of the beam injection relative to the helical pitch of the magnetic field lines. If the signs of toroidal magnetic field and plasma current yield the proper helicity, both measurement and calculation indicate that the efficiency is as good as on-axis NBCD because the increased fraction of trapped electrons reduces the electron shielding of the injected ion current, in contrast with electron current drive schemes where the trapping of electrons degrades the efficiency. The measured off-axis NBCD increases approximately linearly with the injection power, although a modest amount of fast ion diffusion is needed to explain an observed difference in the NBCD profile between the measurement and the calculation at high injection power.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nanocluster explosions and generation of quasimonoenergetic ions

Expansion of an initially uniform spherical plasma is studied analytically and numerically. A self-similar solution describes the nonrelativistic expansion of a finite plasma mass including charge separation effects. Such key features as the energy spectrum, maximum ion energy, and energy transfer efficiency from the electrons to the ions are given by simple analytic formulae. The solution predicts that impurity ions doped homogeneously in a droplet plasma are accelerated quasimonoenergetically by the electrostatic field generated by the charge separation. The prediction is confirmed by N-body particle simulations. The origin of the monoenergetic spectrum is therefore attributed to the spherical geometry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurement and Modelling of Tearing Mode Stability for Steady-State Plasmas in DIII-D

High-beta, quasi-steady state scenarios represent a fundamental step towards the performance required for future fusion reactors. In DIII-D steady-state scenario discharges, the normalized beta {beta}{sub N} {triple_bond} {beta}(%) {center_dot} a(m) {center_dot} B{sub T}(T)/I{sub p}(MA) (where {beta} is the ratio of the plasma pressure to the magnetic field pressure, {alpha} the plasma minor radius, B{sub T} the toroidal magnetic field and I{sub p} the plasma current) exceeds the no-wall ideal kink beta limit. The performance of this scenario is limited by the onset of an n = 1 tearing mode, which appears on the resistive evolution time-scale (1-2 s) at constant pressure and causes both a loss of confinement and a radial redistribution of the current density from which the available current drive sources cannot recover. It is routinely observed that the injection of electron cyclotron current drive (ECCD), with a broad deposition localized around {rho} {approx} 0.35, can prevent the mode from appearing. It must be noted that this is not a case of a direct stabilization due to the interaction with the mode's rational surface. These variations of the scenario are illustrated in Fig. 1, where the total injected power [neutral beam injection (NBI) and ECCD], {beta}{sub N} and the n = 1 magnetic perturbation at the outer wall are shown. In case (a), the onset of the n = 1 mode is observed when the EC power is not present or if it is stopped before the end of the high {beta} phase, whereas in case (b) the difference is pointed out between broad and narrow current deposition (with the narrow deposition case becoming unstable). The current density profile evolution and the MHD modes of several sets of significant discharges with and without ECCD (at different locations) have been analyzed, using motional Stark effect (MSE) spectroscopy measurements for the former and edge magnetic probes measurements, toroidal rotation profiles and fast electron cyclotron emission (ECE) data for the latter. One equilibrium based on EFIT reconstruction [1] with kinetic data has been perturbed by adding local current density at a specific radius, mimicking the application of EC waves, and the changes in the stability for a sequence of equilibria with the current perturbed at various radii, have been evaluated by means of the DCON [2], GATO [3] and PEST3 [4] codes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma Shape Optimization for Steady-State Tokamak Development in DIII-D

For a more detailed account of the results summarized here and for references, see C.T. Holcomb et al., Phys. Plasmas 16, 056116 (2009). Advanced tokamak research on DIII-D is focused on developing a high fusion gain, steady-state scenario that would eliminate or greatly reduce the demands on an inductive transformer in future machines. Steady-state operation requires the inductively driven current density (j{sub Ind}) be zero everywhere. Most of the total current I{sub p} is typically from self-driven bootstrap current, with the remainder driven by external noninductive sources, such as neutral beam and radiofrequency current drive. This paper describes an extension of the fully noninductive condition (f{sub NI} {approx} 100%) to {approx}0.7 current relaxation times that was achieved by a combination of more available ECCD and new scientific insights. The insights are an optimization of performance through variation of the plasma shape parameter known as squareness ({zeta}) and an optimization of divertor magnetic balance. These optimizations simultaneously improve stability, confinement, and density control. These are each essential for achieving fully noninductive operation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental Evidence of Impact Ignition: 100-Fold Increase of Neutron Yield by Impactor Collision

We performed integrated experiments on impact ignition, in which a portion of a deuterated polystyrene (CD) shell was accelerated to about 600 km/s and was collided with precompressed CD fuel. The kinetic energy of the impactor was efficiently converted into thermal energy generating a temperature of about 1.6 keV. We achieved a two-order-of-magnitude increase in the neutron yield by optimizing the timing of the impact collision, demonstrating the high potential of impact ignition for fusion energy production.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗