Search NASA⌕ Search

Engineering topics

Murdoch, Lawrence

Publications and source records attributed to Murdoch, Lawrence.

7 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

A Microwave Photonics Optical Fiber Method for Measuring Distributed Strain for Hydrologic Applications in the Vadose and Saturated Zones

Distributed strain measurements appear to hold significant potential for monitoring hydrologic processes. Coherence-length-gated Microwave Photonics Interferometry (CMPI) is a distributed sensing technique that measures strain in an optical fiber by reading optical interference phase changes in the microwave domain. The technique provides 10nε resolution when cm spatial resolution is applied. CMPI was used to measure the strain caused by small periodic variations in air pressure (25 Pa amplitude and 4 Hz) in a sand-filled laboratory column used to represent barometric loading in the vadose zone. The strain varied as a periodic function with an amplitude that decreased and a phase that increased with depth. The distribution of amplitude and phase of the strain depended on the water saturation, permeability, and presence of a barrier at the top of the sand. A theoretical analysis suggests that the air pressure diffusivity estimated from pressure data is similar to the diffusivity estimated from the distributed strain. These results indicated that the CMPI distributed strain measurement system could be used to improve monitoring and characterization of the vadose and underlying saturated zone.

Hua, Liwei↗
DOE OSTI2023

Utah FORGE 3-2514: A Strain Sensing Array to Characterize Deformation at the FORGE Site - Workshop Presentation

This is a presentation on the Strain Sensing Array to Characterize Deformation at the FORGE Site project by Clemson University, presented by Lawrence Murdoch. The project's objective was to evaluate the feasibility of measuring and interpreting tensor strain data to improve the performance of EGS. This presentation was featured in the Utah FORGE R&D Annual Workshop on September 8, 2023. The workshop provided a valuable opportunity to explore the progress made in each of the 17 Research and Development projects funded under Solicitation 2020-1 which aim to enhance our understanding of the crucial factors influencing the development of Enhanced Geothermal Systems (EGS) reservoirs and resources.

15 GEOTHERMAL ENERGY↗
DOE OSTI2023

Radionuclide Waste Disposal: Development of Multi-scale Experimental and Modeling Capabilities (Final Report)

The DOE EPSCoR Implementation project “Radioactive waste management: Development of multi-scale experimental and modeling capabilities” helped to develop a team of scientists and engineers from Clemson University, South Carolina State University, and the University of South Carolina to address the disposition of nuclear wastes and study the transport of radioisotopes from a waste repository in the near and far field. The project involved 20 faculty from the three institutions as well as 13 postdoctoral fellows, 32 graduate students, and 32 undergraduate students and was active from 2014-2019. Additionally, we forged new collaborations with nine researchers from DOE laboratories SRNL, LLNL, and ANL as well as the University of Manchester and the China Academy of Engineering Physics. The overarching goal of the project was to understand the conditions under which important classes of co-reactants, ranging from counter ions in crystal lattices to dissolved oxygen in pores, control the chemistry and transport characteristics of radionuclides in engineered waste forms and natural soils. Our approach was to characterize the time and length scales over which non-equilibrium states are maintained by rate-limiting, or rate-enhancing, reactions between radionuclides and co-reactants due to interactions between physical mass-transfer processes (i.e., advection, diffusion) and (biogeo) chemical reactions. We have focused our project on three specific classes of reactions relevant to radionuclide transport at DOE legacy sites: ion exchange/substitution, ligand complexation, and redox-mediated reactions. Understanding radionuclide migration requires detailed knowledge of how changes to a system – whether engineered or natural – drive the behavior of co-reactants, which in turn provide the geochemical context controlling radionuclide transport. Student engagement and training were a primary focus of the project in order to create a pipeline of researchers who could work in the area of nuclear waste disposition to support the state and the nation. Over the duration of the project we worked with 32 undergraduate, graduated 18 M.S. students and 14 Ph.D. students, and advised 13 postdoctoral fellows. The Ph.D students and postdocs have primarily taken positions at DOE laboratories, academia, and industry. Through our collaborative team, numerous follow on projects have been started with over $5M in sponsored research. Additionally, thus far the team has published 53 peer reviewed papers and given over 75 technical presentations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Damage detection in a laboratory-scale wellbore applying Time Reversal and Nonlinear Elastic Wave Spectroscopy (TR NEWS)

We report Time Reversal and Nonlinear Elastic Wave Spectroscopy (TR-NEWS) has been used to focus acoustic energy, and make measurements correlated with damage in a variety of industrial materials. Most studies using TR-NEWS have focused on relatively small objects and may have multiple acoustic sources. In Earth, within energy extraction and carbon sequestration settings, the structure and scale of wellbores makes acoustic focusing challenging, as has been demonstrated through numerical simulations. This paper explores the feasibility of applying TR NEWS for damage detection in wellbores by constructing a laboratory-scale wellbore, and using TR to focus and make dynamic linear and nonlinear elastic measurements on it. During successive cycles of localized mechanical damage induced in the sample, the hysteretic nonlinear elastic parameter α increased with progressive mechanical damage. In addition to these strain-dependent changes in α, the width and peak amplitude of the time reversal focused energy changed near the damage site.

58 GEOSCIENCES↗
DOE OSTI2021

Phase Demodulation by Frequency Chirping in Coherence Microwave Photonic Interferometry

This paper presents a signal processing method to demodulate the optical interference phase of cascaded individual optical fiber intrinsic Fabry-Perot interferometric (IFPI) sensors in a coherent microwave-photonic interferometry (CMPI) distributed sensing system. The new method utilizes the chirp effect of electro-optic modulator (EOM) to create a quasi-quadrature optical interference phase shift between two adjacent pulses which correspond to two adjacent reflection points in the time domain. The phase shift can be controlled by adjusting the bias voltage that is applied to the EOM. The interference phase is calculated by elliptically fitting the phase shift. The interference phase change is proportional to the optical path difference (OPD) change of the interferometer, and the sign can be used to differentiate the increase or decrease of the OPD. The method is demonstrated for distributed strain sensing, showing good linearity, high resolution and large dynamic range.

42 ENGINEERING↗
DOE OSTI2021

Microwave–photonic low-coherence interferometry for dark zone free distributed optical fiber sensing

A microwave–photonic low-coherence interferometry (MPLCI) system is proposed for fully distributed optical fiber sensing. Assisted by an unbalanced Michelson interferometer, a low-coherence laser source is used to interrogate cascaded Fabry–Perot interferometers along with an optical fiber for a dark zone free (or spatially continuous) distributed measurement. Here, by combining the advantages of microwaves and photonics, the MPLCI system can synergistically achieve high sensitivity and high spatial resolution. Our tests have confirmed a strain resolution of 95 nε at the spatial resolution of 10 cm.

42 ENGINEERING↗