Search NASA⌕ Search

Engineering topics

Murph, Simona Hunyadi

Publications and source records attributed to Murph, Simona Hunyadi.

Novel alkali intercalated and acid-exfoliated biochars with enhanced surface areas for contaminant adsorption applications

Cost-effective and eco-friendly adsorbents are essential in environmental engineering and biochar is a promising material from the perspective. A novel and efficient surface modification approach involving alkali intercalation and acid exfoliation was designed in this study to enhance the physicochemical properties of biochar. Here, the alkali intercalation process utilizes potassium hydroxide (KOH), while acid exfoliation involves varying HNO 3 , H 2 SO 4 , and H 3 PO 4 concentrations. A simple two-stage pyrolysis process was employed to facilitate the intercalation-exfoliation modification. The modified biochars were characterized using BET, SEM, XRD, etc., to understand physicochemical properties. To quantify the effectiveness of the modifications, adsorption of malachite green dye as a model moiety was investigated. Dye removal sorption rates exceeding 99 % were recorded in the case of the biochars modified through a two-step process using KOH and 0.1MH 3 PO 4 . Specifically, the highest contaminant removal of 99.9 % was recorded when 60 mg of the KOH-0.1MH 3 PO 4 biochar was employed, which is significantly higher than unmodified biochar’s 45.41 % removal at a higher dosage of 100 mg. Moreover, the adsorption kinetics revealed that all the modified biochars attained the maximum removal concentrations (~99 % removal) in a mere 300 min, indicating a tenfold improvement in adsorption rate from unmodified biochar's requirement of over 5000 min. The results achieved through this study provide a cost-effective, fast, and environment-friendly technology for enhancing the adsorption characteristics and performance of biochars toward contaminant removal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Improved Understanding of Airborne Release Fraction and Respirable Fraction from Postulated Free-Fall Spill in DOE Nuclear Facilities (Annual Project Summary Report for NSRD-38)

The two-year experimental project has been completed to update the Airborne Release and Respirable Fraction (ARF and RF) estimates from the free-fall spills of liquid waste simulants. The objectives of the project at the Savannah River National Laboratory (SRNL) are to: (1) establish a technically defensible bounding approach for a reasonably conservative limit to the fall height used in the Ballinger correlation for the ARF, such that spill heights for near-water density liquid solutions above a critical height result in the same value of the ARF; and (2) provide a revised technical basis and data to support the ARF and RF correlation for free-fall liquid spills of heights from 1 to 10 meters. After peer review, these data and associated correlation will be available for consideration in a revision to DOE-HDBK-3010, Airborne Release Fractions/Rates and Respirable Fractions for Nonreactor Nuclear Facilities.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Material Developments for 3D/4D Additive Manufacturing (AM) Technologies

Additive Manufacturing (AM), or 3D printing, is a unique technology in which structurally complex objects can be easily manufactured. While AM allows for the creation of intricate 3D objects, these objects are inactive and motionless. With recent incorporation of a “pre-programmed functionality’’ to the 3D printed objects, a new concept has emerged, 4D printing. Specifically, the 4D printing technology enables a static 3D printed object to change its shape, functionality or property over time upon exposure to a specific stimulus such as heat, stress, light, pH, and moisture, etc. We designed and produced compact 3D/4D printable materials that can be used as (a) structural components of the unmanned aerial vehicles (UAVs), and (b) as hydrogen storage materials that supply hydrogen to a fuel cell to expand the operational reach, namely flight time, and endurance of the UA Vs.

36 MATERIALS SCIENCE↗

Nanomaterial-Treated Filters for the Uptake of Heavy Metals from Water Sources

We describe the synthesis and properties of ligand-modified gold nanoparticles (AuNPs) grown on stainless steel wool filters. Their selectivity and efficiency with regards to heavy metal uptake from groundwater and other sources of drinking water found at or near DOE facilities were also tested. The nanomaterial-treated filters are advantageous because they serve as inactive supports that allow for efficient flow of the contaminated water and can be easily replaced after heavy metal uptake. They are also comparable to nanomaterials free in solution with regards to the effectiveness of remediation of drinking water.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Fe 2 O 3 -Au hybrid nanoparticles for sensing applications via SERS analysis

Multifunctional iron oxide-gold hybrid nanostructures have been produced via solution chemistries and investigated for analyte detection. Gold nanoparticles of various shapes have been used for probing surface-enhanced Raman scattering (SERS) effects as they display unique optical properties in the visible-near IR region of the spectrum. When coupled with other nanoparticles, namely iron oxide nanoparticles, hybrid structures with increased functionality were produced. By exploiting their magnetic properties, nanogaps or “hot spots” were rationally created and evaluated for SERS enhancement studies. The “hot spots” were created by using a seeded reaction to increase the gold loading on the iron oxide support by 43% by weight. SERS Nanomaterials were evaluated for their ability to promote surface-enhanced Raman scattering of a model analyte, 4-mercaptophenol. The data shows an enhancement effect of the model analyte on gold decorated iron oxide nanoparticles.

36 MATERIALS SCIENCE↗

Fe 2 O 3 -Au hybrid nanoparticles for sensing applications via sers analysis

Nanoparticles with large amounts of surface area and unique characteristics that are distinct from their bulk material provide an interesting application in the enhancement of inelastic scattering signal. Surface Enhanced Raman Spectroscopy (SERS) strives to increase the Raman scattering effect when chemical species of interest are in the close proximity of metallic nnaostructures. Gold nanoparticles of various shapes have been used for sensing applications via SERS as they demonstrate the greatest effect of plasmonic behavior in the visible-near IR region of the spectrum. When coupled with other nanoparticles, namely iron oxide nanoparticles, hybrid structures with increased functionality were produced. Multifunctional iron oxide-gold hybrid nanostructures have been created via solution chemistries and investigated for analyte detection of a model analyte. By exploiting their magnetic properties, nanogaps or “hot spots” were rationally created and evaluated for SERS enhancement studies.

36 MATERIALS SCIENCE↗

Hybrid Magnetic Core-Shell Nanophotocatalysts for Environmental Applications

This research study describes a facile sol-gel method to creating hybrid iron (III) oxide/silica/titania nanomaterials decorated with gold nanoparticles for use in environmental applications. The multi-functional composition of the nanomaterials allows for photocatalyzed reactions to occur in both the visible and the UV range. The morphologies, elemental composition, and surface charge of the nanoparticles were determined by Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDS), and Phase Analysis Light Scattering (PALS), respectively. The photocatalytic activity of the synthesized hybrid nanoparticles for breaking down a model analyte, methyl orange (MO), was then evaluated using UV-Vis Spectroscopy. The efficiency of the photocatalyst under UV light irradiation was measured and compared to other well-studied nanophotocatalysts, namely titanium oxide and iron oxide nanoparticles. The concentration dependence of both the photocatalyst and the analyte was also investigated. By utilizing the known UV-active properties of TiO 2 , the magnetic properties of Fe 2 O 3 , the optical properties of gold in the visible range of the spectrum, and the high stability of silica, a novel, highly efficient photocatalyst that is active on a broad range of the spectrum (UV-Vis) can be created to destroy organic pollutants in wastewater streams.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Gold-manganese nanoparticles for targeted diagnostic and imaging

Imagine the possibility of non-invasive, non-radiation based Magnetic resonance imaging (MRI) in combating cardiac disease. Researchers at the Savannah River National Laboratory (SRNL) are developing a process that would use nanotechnology in a novel, targeted approach that would allow MRIs to be more descriptive and brighter, and to target specific organs. Researchers at SRNL have discovered a way to use multifunctional metallic gold-manganese nanoparticles to create a unique, targeted positive contrast agent. SRNL Senior Scientist Dr. Simona Hunyadi Murph says she first thought of using the nanoparticles for cardiac disease applications after learning that people who survive an infarct exhibit up to 15 times higher rate of developing chronic heart failure, arrhythmias and/or sudden death compared to the general population. Without question, nanotechnology will revolutionize the future of technology. The development of functional nanomaterials with multi-detection modalities opens up new avenues for creating multi-purpose technologies for biomedical applications.

36 MATERIALS SCIENCE↗