Engineering topics

Mustard, J. F.

Publications and source records attributed to Mustard, J. F..

13 records

NASA NTRS2018

Seeking Signs of Life on Mars: A Strategy for Selecting and Analyzing Returned Samples from Hydrothermal Deposits

Highly promising locales for biosignature prospecting on Mars are ancient hydrothermal deposits, formed by the interaction of surface water with heat from volcanism or impacts. On Earth, they occur throughout the geological record (to at least approx. 3.5 Ga), preserving robust mineralogical, textural and compositional evidence of thermophilic microbial activity. Hydrothermal systems were likely present early in Mars' history, including at two of the three finalist candidate landing sites for M2020, Columbia Hills and NE Syrtis Major. Hydrothermal environments on Earth's surface are varied, constituting subaerial hot spring aprons, mounds and fumaroles; shallow to deep-sea hydrothermal vents (black and white smokers); and vent mounds and hot-spring discharges in lacustrine and fluvial settings. Biological information can be preserved by rapid, spring-sourced mineral precipitation, but also could be altered or destroyed by postdepositional events. Thus, field observations need to be followed by detailed laboratory analysis to verify potential biosignatures. See Attachment

Campbell, K. A.↗

NASA NTRS2018

Seeking Signs of Life on Mars: the Importance of Sedimentary Suites as Part of a Mars Sample Return Campaign

Seeking the signs of life on Mars is often considered the "first among equal" objectives for any potential Mars Sample Return (MSR) campaign. Among the geological settings considered to have the greatest potential for recording evidence of ancient life or its pre-biotic chemistry on Mars are lacustrine (and marine, if ever present) sedimentary depositional environments. This potential, and the possibility of returning samples that could meaningfully address this objective, have been greatly enhanced by investigations of an ancient redox stratified lake system in Gale crater by the Curiosity rover.

Mangold, N.↗

NASA NTRS2017

Jezero Crater, Mars, as a Compelling Site for Future In Situ Exploration

Jezero is a approximately 45 km diameter impact crater located in the Nili Fossae region of Mars. Jezero is an outstanding site to address key questions of ancient Mars climate, habitability, and volcanic history because: (a) It hosted an open-basin lake during the era of valley network formation [1,2], which ceased at approximately the Noachian-Hesperian boundary [3]. (b) It contains two delta deposits [1,4] with Fe/Mg-smectite and Mg-carbonate sediment [4-7] (the only exposure of lacus-trine shoreline carbonates seen so far on Mars). (c) The depositional environment and mineral assemblage of the delta are promising for the concentration and preservation of organic matter [5,8]. (d) The diverse geologic units in Jezero are in clear stratigraphic context [7]. The Jezero paleolake system has been thoroughly investigated at a variety of scales, including work on: the mineralogy of the delta deposits [4-6] and watershed [7], as well as the morphology and sedimentology of the basin [9] and delta deposits [1,4]. The geologic context of Jezero is also well-studied given the broad suite of alteration minerals exposed in the ancient stratigraphies of the Nili Fossae region [e.g., 6,10-13]. Here we present an overview of the units accessible for exploration in the Jezero basin, including questions and hypotheses that can be tested through analysis in situ and of returned samples. This is particularly timely given the upcoming Mars 2020 mission, for which Jezero is one of the final eight landing sites [14]. Primary science objectives for Mars 2020 are to: (1) characterize the geologic history of a site with "evidence of an astrobiologically-relevant ancient environment and geologic diversity"; (2) assess the habitability and "potential evidence of past life" in units with "high biosignature preservation potential"; and (3) cache scientifically compelling samples for potential return to Earth [15].

Mars↗

NASA NTRS2007

Clay Bearing Units in the Region around Mawrth Vallis: Stratigraphy, Extent, and Possible Alteration Fronts

The largest exposure of phyllosilicates on Mars occurs on the highland plains around Mawrth Vallis. This exposure extends for about 300 km southward from the edge of the dichotomy boundary, covering an area greater than 200 x 300 kilometers over an elevation range of approximately 2000 meters. At least two different types of hydrated phyllosilicates (Fe/Mg-rich and Al-rich phyllosilicates) have been identified in OMEGA data based on absorption bands near 2.3 and 2.2 micrometers, respectively. These clay-bearing units are associated with layered, indurated light-toned units with complex spatial and stratigraphic relationships, and are unconfomably overlain by a darker, indurated, more heavily cratered unit. Ongoing analysis of OMEGA (approximately 1 kilometer/pixel) and CRISM multi-spectral (MSP, 200 meters/pixel) data reveal hydrated minerals with absorptions at approximately 2.2 or 2.3 micrometers in locations up to 300 kilometers away from the borders of the previously identified extent of clay-bearing units. We seek to: 1) further constrain the mineralogy of the hydrated species identified in [5], and 2) understand spatial and stratigraphic relationships between the different hydrated minerals and the cratered plains units in which they are found. In this work we perform mineralogical and stratigraphic comparisons between units to test whether these extended units may be related, in order to establish a broad zone of alteration.

Dobrea, E. Z. Noe↗

NASA NTRS2006

Identification of Hydrated Sulfates Collected in the Northern Rio Tinto Valley by Reflectance and Raman Spectroscopy

OMEGA recently identified spectral signatures of kieserite, gypsum, and other polyhydrated sulfates at multiple locations on the surface of Mars [1,2]. The presence of sulfates was confirmed through in situ spectroscopy by MER Opportunity [3]. An approach to validate these interpretations is to collect corresponding spectral data from sulfate-rich terrestrial analog sites. The northern Rio Tinto Valley near Nerva, Spain, is a good Martian analog locale because it features extensive seasonal sulfate mineralization driven by highly acidic waters [4]. We report on mineralogical compositions identified by field VNIR spectroscopy and laboratory Raman spectroscopy.

Chemtob, S. M.↗

NASA NTRS2003

OMEGA Observations of Mars Analogue Rocks

In the last 20 years, imaging spectrometry in the visible and near infrared onboard spacecraft has become an essential technique to study surfaces and atmospheres of planetary objects, prior and in addition to in-situ analyses. Remote sensing experiments analyzing the sunlight reflected by planetary surfaces can be used to derive the mineralogical composition and physical properties of the natural surfaces and atmospheres observed. This technique was successfully used on Mars with ISM instrument. As an improvement of ISM, OMEGA onboard MARS-EXPRESS will play a key role in the mineralogical mapping of the Martian surface. We present the reflectance measurements made with OMEGA during on ground calibration sessions on natural slabs of rocks and minerals part of a database which will be used on similar future American instruments (as CRISM onboard MRO). We discuss the implication on the scientific capabilities of OMEGA instrument.

Bonello, G.↗

NASA NTRS2000

Global Distribution of Dissected Duricrust on Mars

Evidence for dissected duricrust was identified in high resolution MOC images. Analysis of all available images was used to map the global distribution of this terrain. It is apparently restricted to two latitude bands: 30-60 deg. N and 30-60 deg. S.

Mustard, J. F.↗

NASA NTRS1993

Composition of weakly altered Martian crust

The mineralogic and chemical composition of weakly altered crust remains an unresolved question for Mars. Dark regions hold clues to the composition since they are thought to comprise surface exposures of weakly altered crustal materials. Understanding the in situ composition of relatively pristine crustal rocks in greater detail is important for investigating basic volcanic processes. Also, this will provide additional constraints on the chemical pathways by which pristine rocks are altered to produce the observed ferric iron-bearing assemblages and inferred clay silicate, sulphate, and magnetic oxide phases. Reflectance spectra of dark regions obtained with the ISM instrument are being used to determine the basic mineralogy of weakly altered crust for a variety of regions on Mars.

Mustard, J. F.↗

NASA NTRS1993

Visible-infrared properties of controlled laboratory soils

Almost all surfaces available for remote observation consist of particulate materials or soils. The distribution of mean particle sizes depend on the original material and physical and chemical processes that have acted on the surface over time. It is well known that the optical and infrared spectral properties of materials depends on the particle size. There has been little detailed study, however, of natural soils, namely particulate materials with a range of particle sizes. Current models for intimate mixing typically use an average particle size in calculations and are most successful when the particle size is constrained by known sieve fractions. Preliminary results of a study in which soils were prepared with a known composition and range of particle sizes are reported. This discussion presents the overall visible to infrared properties of these synthetic soils and evaluates the mid-infrared properties.

Pieters, C. M.↗

NASA NTRS1992

First results from analysis of coordinated AVIRIS, TIMS, and ISM (French) data for the Ronda (Spain) and Beni Bousera (Morocco) peridotites

Ultramafic rocks are relatively rare at the Earth's surface but constitute the vast majority of the Earth by volume. Exposures of ultramafic bodies are therefore crucial for deducing many important processes that occur in the Earth's mantle. An important science question regarding the spatial distribution, abundance, and composition of mafic minerals in ultramafic bodies that can be examined with advanced sensor data is the melting process. When a lherzolite melts, clinopyroxene (cpx) melts first and therefore variations in the modal amount of cpx remaining in the mantle are a reflection of the amount of fractional melting that has occurred. Fe goes preferentially into the melt during melting but a 20 percent batch melting (i.e. closed system) acquires less Fe relative to 20 percent fractional melting (i.e. open system). Since the strength and wavelength of diagnostic absorptions is a strong function of Fe content, it is possible to make maps of the variation in Fe:Mg ratios which can be related to the general melting process. Accurate ground-truth information about local mineralogy provides internal calibration and consistency checks. Investigations using imaging spectrometer are very complementary to field studies because advanced sensor data can provide a synoptic view of modal mineralogy and chemical composition whereas field studies focus on detailed characterization of local areas. Two excellent exposures of ultramafic lithologies are being investigated with visible to mid-infrared imaging spectrometer data: the Ronda peridotite near Ronda, Spain and the Beni Bousera ophiolitic fragment in northern Morocco. Although separated by the Alboran Sea, these bodies are thought to be related and represent fertile sub-continental mantle. The Ronda peridotite is predominantly spinel lherzolite but grades into harzburgite and shows considerable variation in major and trace element compositions. Mafic layering and dykes (i.e. olivine gabbro) are also observed. This indicates some sections of the peridotite have experienced greater degrees of partial melting. The Beni Bousera peridotite also contains mafic layers and dykes and grades into harzburgite representing similar fundamental shifts in the bulk chemistry of this ultramafic body probably related to an episode of partial melting. The specific mode of emplacement of these bodies is controversial and important for understanding the tectonic evolution of this region. Our investigations are not necessarily designed to help resolve this controversy. Rather, these exposures provide excellent and unusual examples of fertile mantle which have undergone variable degrees of partial melting.

Mustard, J. F.↗

NASA NTRS1986

Abundance and distribution of mineral components associated with Moses Rock (kimberlite) diatreme

The surface mineralogy in and around Moses Rock diatreme, a kimberlite-bearing dike in SW Utah, was examined using internally calibrated Airborne Imaging Spectrometer (AIS) data. Distinct near-infrared absorption characteristics of clays, gypsum, and serpentine (a key marker for kinberlite concentration) allowed the surface units containing these components to be identified spatially and the relative abundance of each component measured. Within the dike itself, channels and dispersed components of kimberlite and blocks of country rocks were accurately determined.

Mustard, J. F.↗

NASA NTRS1985

Spectroscopy of Moses Rock Kimberlite Diatreme

Three types of remote sensing data (Airborne Imaging Spectroscopy (AIS), NS001, Zeiss IR-photographs) were obtained for the Moses Rock kimberlite dike in southern Utah. The goal is to identify and characterize the mantle derived mafic component in such volcanic features. The Zeiss and NS001 images provide information on the regional setting and allow units of the dike to be distinguished from surrounding material. A potential unmapped satellite dike was identified. The AIS data provide characterizing information of the surface composition of the dike. Serpentized olivine-bearing soils are (tentatively) identified from the AIS spectra for a few areas within the dike.

Pieters, C. M.↗

NASA NTRS1985

Spectroscopy of Moses Rock dike using remote sensing

Zeiss IR-photographs, NS0001 (TM simulator) and airborne imaging spectrometer (AIS) data were obtained for the Moses Rock kimberlite dike in southern Utah to identify and characterize the distinctive mafic mineralogy of the dike as well as the surrounding sedimentary rocks. The Zeiss and NS001 images provide information on the regional setting and allow units of the dike to be distinguished from the sediments. The AIS data are narrow images obtained in 128 near-infrared channels and provide characterizing information on the surface composition through. Three distinct spectroscopic units were found which have been tentatively identified as serpentized olivine-bearing soils found in the dike and two types of gypsum bearing soils found in the surrounding sedimentary soils.

Mustard, J. F.↗