Search NASA⌕ Search

Engineering topics

Myneni, Ganapati

Publications and source records attributed to Myneni, Ganapati.

The effect of heat treatment on structural and electronic properties of niobium nitride prepared by a thermal diffusion method

NbN coatings are prepared onto Nb substrate by thermal diffusion at high temperatures. The formation of NbN coating by thermal diffusion was studied in the range of 1250-1500 °C at constant nitrogen background gas pressure (1.3x10 -3 Pa) and processing time (180 min). The electronic and crystal structures of the NbN coatings were investigated. It was found that nitrogen diffuses into Nb forming the Nb-N solid solution (bcc) a-NbN phase that starts to appear above 1250 °C. Increasing the processing temperature gives richer a-phase concentration. Besides, X-ray absorption spectroscopy (XAS) was performed to study the electronic structure of the NbN layer. The results of the electronic structural study corroborate the crystal structural analysis. The Nb M 3,2 edge X-ray absorption spectroscopy (XAS) spectrum shows strong temperature dependence. At the highest processing temperature (1500 °C), the number of d holes increased. Nitrogen diffusion into Nb is resulting to increase electrostatic interaction between d electron and core hole. Lastly, for the studied conditions, only the α-NbN was observed in the X-ray diffraction patterns.

36 MATERIALS SCIENCE↗

Ingot Niobium Summary

CBMM North America (formerly Reference Metals Company, a subsidiary of CBMM ~ Companhia Brasileira de Metalurgia e Minera~ao, Brazil) and Jefferson Lab entered into a Cooperative Research And Development Agreement (CRADA) in August 2004 to carry out mutually beneficial R&D on Pyrochlore based niobium for Superconducting Radio Frequency (SRF) accelerator applications. They jointly invented and patented the large grain niobium cavities built directly from the ingot niobium slices. During October 30 - November I, 2006, in collaboration with Jefferson Lab, CBMM hosted the first international workshop on single crystal ~ large grain niobium technology near the world's largest niobium mine in Araxa, Brazil. The deliberations of this workshop were published as American institute of Physics (AlP) Conference Proc~edings (CP) AlP CP 927. In 201 0, in collaboration with the industrial partner CBMM, Jefferson Lab hosted the first International Symposium on Superconducting Science and Technology of Ingot Niobium in Newport News Virginia, USA, from September 22 to 24. At this forum, university, industrial, and national research institution experts from around the world exchanged information and views on the status of ingot niobium science and technology and on the technology's advantages in obtaining high~ performance superconducting radio frequency (SRF) accelerator structures with reduced processing at lower cost. The international collaborators discussions on the ingot niobium technology were published as AlP CP 1352. On December 4th 2015 Jefferson Lab hosted Ingot Niobium Summary Workshop in collaboration with CBMM. At this workshop the ingot niobium technology collaborators from around the world presented reviews of their exciting work carried out during the past 11 years. The invited presenters are from Brazil, Germany, India, Italy, Japan and USA. A new book entitled, "Science and Technology of Ingot Niobium for Superconducting Radio Frequency Applications" with 16 invited chapters divided into three sections was released on the 3rd of December 2015. The projected applications of this high efficiency~low cost ingot niobium technology include medical/industrial radioisotopes, accelerator driven subcritical systems, energy recovery linacs, future circular colliders, FEL's and other technologies based on these ingot niobium SRF accelerators in stead of the present high purity polycrystalline niobium based high cost accelerators.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pulsed laser deposition of niobium nitride thin films

Niobium nitride (NbN{sub x}) films were grown on Nb and Si(100) substrates using pulsed laser deposition. NbN{sub x} films were deposited on Nb substrates using PLD with a Q-switched Nd:YAG laser (λ = 1064 nm, ∼40 ns pulse width, and 10 Hz repetition rate) at different laser fluences, nitrogen background pressures and deposition substrate temperatures. When all the fabrication parameters are fixed, except for the laser fluence, the surface roughness, nitrogen content, and grain size increase with increasing laser fluence. Increasing nitrogen background pressure leads to a change in the phase structure of the NbN{sub x} films from mixed β-Nb{sub 2}N and cubic δ-NbN phases to single hexagonal β-Nb{sub 2}N. The substrate temperature affects the preferred orientation of the crystal structure. The structural and electronic, properties of NbN{sub x} deposited on Si(100) were also investigated. The NbN{sub x} films exhibited a cubic δ-NbN with a strong (111) orientation. A correlation between surface morphology, electronic, and superconducting properties was found. The observations establish guidelines for adjusting the deposition parameters to achieve the desired NbN{sub x} film morphology and phase.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ingot Nb based SRF technology for the International Linear Collider

The International Linear Collider (ILC) is anticipated to be built as the next energy-frontier electron-positron colliding accelerator with a global effort in particle physics. Niobium based Superconducting Radio-Frequency (SRF) technology is required to provide beam-accelerating structure with elliptical cavity strings to linearly accelerate the electron and positron beams up to 250 GeV and to realize a center-of-mass energy of 500 GeV in collisions. The accelerator design and R&D efforts progressed, and the ILC Technical Design Report (ILC-TDR) was published in 2013. Niobium will take a critical role to generate electric field gradient with a frequency of 1.3 GHz, for accelerating the beam with the best efficiency, in energy balance, using RF superconductivity. This paper discusses a technical approach to provide Nb material (ingot) and thin disks for producing the elliptical cavity structure, with direct slicing from Nb ingot having sufficiently optimized purity and residual resistance ration (RRR) necessary for the ILC SRF cavities.

43 PARTICLE ACCELERATORS↗

Experimental characterization of magnetic materials for the magnetic shielding of cryomodules in particle accelerators

The magnetic properties of two important passive magnetic shielding materials (A4K and Amumetal) for accelerator applications, subjected to various processing and heat treatment conditions are studied comprehensively over a wide range of temperatures: from cryogenic to room temperature. Furthermore, we analyze the effect of processing on the extent of degradation of the magnetic properties of both materials and investigate the possibility of restoring these properties by re-annealing.

43 PARTICLE ACCELERATORS↗

Superconducting DC and RF properties of ingot Niobium used in SRF cavity fabrication

Bulk niobium (Nb) has been the material of choice for the superconducting radiofrequency (SRF) cavity used in particle accelerator because of its highest transition temperature (Tc) and highest lower critical field (Hc1~ 190 mT) among the elemental type-II superconductors. The overall performance of these SRF cavities is measured by its quality factor, Q0 as a function of the accelerating gradient, Eacc. Higher Q0 for the reduction of cryogenic loss and higher Eacc for the use of high energy accelerators are desired. SRF cavities fabricated from ingot niobium have become a viable alternative to standard high-purity fine-grain Nb for the fabrication of high-performing SRF cavities with the possibility of significant cost reduction. In this contribution, we present the results on DC, low-frequency and RF measurements of Nb rods machined from ingots with different impurity concentrations, provided by CBMM, Brazil. The rods have been subjected to different treatments typically applied to SRF cavities. In addition, single-cell cavities are being fabricated from the same ingot material and initial results on one of them showed high Q0-values at 2 K up to peak surface magnetic fields of about 110 mT. Residual resistance values below 5 n have been consistently achieved on this cavity. A new induction furnace was commissioned for the heat treatment of these single-cells, which allows avoiding subsequent chemical etching of the cavity surface.

Myneni, Ganapati↗

CW SRF Systems with Ingot Niobium and their Applications

CW SRF Systems with Ingot Niobium* and Their Applications Ganapati Myneni ISOHIM/University of Virginia/JLab Continuous wave superconducting radio frequency (SRF) accelerator systems are needed not only for discovery science programs through out the world but they are also expected to find applications in a wide variety of programs including advanced reactor cycles using thorium as nuclear fuel, commercial and university compact linacs and FEL?s. However, these state of the art particle accelerator systems are very expensive to build and consume significant power in their operations. In the present world economic, energy sustainability and global warming concerns, we must improve the efficiency of the CW SRF accelerator systems considerably and in a cost effective manner. In this presentation I will review the current status of the CW SRF systems including the recent advances in improving the quality factor of the SRF cavities at very much reduced costs and possible R&D avenues. *Companhia Brasileira de Metalurgia e Mineração (CBMM) - Jefferson Laboratory Technology

Myneni, Ganapati↗

Development of SIMS Standards for Measurement of H, C, O, N in Nb

Performance of SRF cavities is strongly dependent on the interior surface due to its shallow RF penetration depth. Therefore it is important to study Nb surface characteristics and identify elemental contamination which could affect the performance of the SRF Nb cavity. C, N, and O are of particular interest as interstitial contaminants and earlier work suggested very high H concentration [1]. Secondary Ion Mass Spectrometry (SIMS) has the depth resolution and sensitivity to quantitatively measure these species in the region of interest. However, standards for quantitative SIMS analysis of these elements in Nb did not exist. Initial attempts to develop an ion implanted standard were unsuccessful because of the roughness of the Nb surface and the inability to polish the soft metal Nb surface with traditional methods. In this study, Nb samples were specially chemical mechanical polished and then subsequently treated with a light buffered chemical polish (BCP). The result is a surface finish suitable for SIMS analysis and implantation standards. Ion implants of C, N, O, and deuterium (D) were obtained in Nb (and simultaneously in Si for dose verification). D was implanted to characterize H, and to avoid the high H background. The results show that D is apparently very mobile in Nb, and another approach will be required to quantify this element. This multi-element standard has already been of great benefit in characterization of C, O, and N in polycrystalline and large grain Nb [2]. [1] A. D. Batchelor, D. N. Leonard, P. E. Russell, F. A. Stevie, D. P. Griffis, G. R. Myneni, Proceedings of Single Crystal Niobium Technology Workshop, Brazil, AIP Conference Proceedings, Melville, NY (2007) 72-83. [2] P. Maheshwari, H. Tian, C. E. Reece, M. J. Kelley, D. P. Griffis, G. R. Myneni, F. A. Stevie, J. M. Rigsbee, A. D. Bachelor, Surface and Interface Analysis (in press) This work was authored by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177

43 PARTICLE ACCELERATORS↗

SRF Technology - Past, Present and Future Options

Superconducting radiofrequency cavities for all recent projects (CEBAF, SNS, KEKB, and TTF) have been built from high purity polycrystalline niobium with a residual resistance ratio (RRR) greater than 250. The procedures and processes used from the initial production of the high RRR polycrystalline niobium sheets to the finished cavities are complex, numerous and very expensive, and the yield of SRF cavities meeting the performance specifications is very low. CBMM Jefferson Lab invented the large grain and single crystal niobium technologies, and the use of niobium sliced directly from the ingots is expected to change the SRF technology outlook with fewer, and more streamlined, production processes that will not only be cost effective but also generate high yield. In this paper we will show that less stringent commercial niobium specifications are required, and explore the processes and procedures that will lay the foundation for producing SRF cavities with good quality factors at hi

43 PARTICLE ACCELERATORS↗