Search NASA⌕ Search

Engineering topics

Naik, R

Publications and source records attributed to Naik, R.

Elucidation of Peptide-Directed Palladium Surface Structure for Biologically Tunable Nanocatalysts

Peptide-enabled synthesis of inorganic nanostructures represents an avenue to access catalytic materials with tunable and optimized properties. This is achieved via peptide complexity and programmability that is missing in traditional ligands for catalytic nanomaterials. Unfortunately, there is limited information available to correlate peptide sequence to particle structure and catalytic activity to date. As such, the application of peptide-enabled nanocatalysts remains limited to trial and error approaches. In this paper, a hybrid experimental and computational approach is introduced to systematically elucidate biomolecule-dependent structure/function relationships for peptide-capped Pd nanocatalysts. Synchrotron X-ray techniques were used to uncover substantial particle surface structural disorder, which was dependent upon the amino acid sequence of the peptide capping ligand. Nanocatalyst configurations were then determined directly from experimental data using reverse Monte Carlo methods and further refined using molecular dynamics simulation, obtaining thermodynamically stable peptide-Pd nanoparticle configurations. Sequence-dependent catalytic property differences for C-C coupling and olefin hydrogenation were then eluddated by identification of the catalytic active sites at the atomic level and quantitative prediction of relative reaction rates. This hybrid methodology provides a clear route to determine peptide-dependent structure/function relationships, enabling the generation of guidelines for catalyst design through rational tailoring of peptide sequences

atomic pair distribution function↗

Weak ferromagnetic ordering in Ca doped polycrystalline BiFeO{sub 3}

Structural and magnetic properties of polycrystalline BiFeO{sub 3}, Bi{sub 0.9}Ca{sub 0.1}FeO{sub 2.95}, Bi{sub 0.9}Ba{sub 0.05}Ca{sub 0.05}FeO{sub 2.95}, and Bi{sub 0.9}Ba{sub 0.1}FeO{sub 2.95} ceramic samples were studied to establish the effects of doping in BiFeO{sub 3} on the magnetic property. X-ray diffraction data of the undoped and doped BiFeO{sub 3} samples were refined to a rhombohedral structure with space group R3c. X-ray photoelectron spectroscopy study showed the formation of a single-phase in both the undoped and doped BiFeO{sub 3} ceramics with Fe in the 3+ valence state. Ca doped and Ba-Ca co-doped BiFeO{sub 3} ceramic samples show weak ferromagnetic ordering at room temperature. This observation makes Ca doped and Ba-Ca co-doped BiFeO{sub 3} samples an interesting material system for magnetoelectric coupling studies.

36 MATERIALS SCIENCE↗

Crystallographic Recognition Controls Peptide Binding for Bio-Based Nanomaterials

The ability to control the size, shape, composition, and activity of nanomaterials presents a formidable challenge. Peptide approaches represent new avenues to achieve such control at the synthetic level; however, the critical interactions at the bio/nano interface that direct such precision remain poorly understood. Here we present evidence to suggest that materials-directing peptides bind at specific time points during Pd nanoparticle (NP) growth, dictated by material crystallinity. As such surfaces are presented, rapid peptide binding occurs, resulting in the stabilization and size control of single-crystal NPs. Such specificity suggests that peptides could be engineered to direct the structure of nanomaterials at the atomic level, thus enhancing their activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dielectric relaxation near 25 K in multiferroic BiFeO{sub 3} ceramics

Our investigations using low-temperature Raman spectroscopy, dielectric, and magnetodielectric studies of as-prepared and vacuum-annealed BiFeO{sub 3} ceramics revealed two dielectric anomalies near 25 and 281 K. Systematic studies were carried out to probe the anomaly near 25 K which exhibits clear frequency dependence and falls close to a previously observed magnetic transition. The low-temperature dielectric relaxation behavior yielded characteristic energy scales of {approx}30 and {approx}34 meV for the as-prepared and vacuum-annealed BiFeO{sub 3} samples, respectively. Raman spectra showed hardening of the E(TO6) and E(TO9) modes near 25 K, and the Raman shift in phonon frequencies is found to be broader in the vacuum-annealed BiFeO{sub 3} than in the as-prepared BiFeO{sub 3}. We observed a linear magnetodielectric coupling in both samples at 25 K. These experimental results suggest that coupling among spin, lattice, and dielectric properties persist to low temperatures in BiFeO{sub 3}.

36 MATERIALS SCIENCE↗

Investigation of E{sub 1}(LO) phonon-plasmon coupled modes and critical points in In{sub 1-x}Ga{sub x}N thin films by optical reflectance measurements

Low energy optical modes of molecular beam epitaxy-grown In{sub 1-x}Ga{sub x}N thin films with 0<=x<=0.6 are investigated using infrared reflectance measurements. We found that the reflectance of the films for wave vectors in the range from 600 to 800 cm{sup -1} is determined by the high energy E{sub 1}(LO)-plasmon coupled modes. In the higher energy regime of the UV-visible reflectance spectrum of InN, critical points with energies 4.75, 5.36, and 6.12 eV belonging to A and B structures are observed. The energies of these critical points increase with increasing values of x, similar to the band gap energy of these films.

36 MATERIALS SCIENCE↗

Robust room temperature persistent photoconductivity in polycrystalline indium oxide films

We have investigated the effects of UV irradiation on the electrical and optical properties of polycrystalline In{sub 2}O{sub 3} films. We found that UV illumination at a peak wavelength of 365 nm leads to a sharp drop in resistance and increase in carrier concentration. This highly conductive state persists for a timescale of hours in air at room temperature after illumination. We observe distinct changes in the optical absorption spectra and the associated change in carrier concentration, which is consistent with a Burstein-Moss shift of {approx}0.1 eV. The relaxation rate of this persistent conducting state depends strongly on temperature. We find that the conductance relaxation in an oxygen-free environment can be described by a stretched exponential while the behavior of the samples in air is better described by a logarithmic relaxation, both of which may be associated with glassy behavior.

36 MATERIALS SCIENCE↗

Strong plasmon absorption in InN thin films

We have fabricated InN thin films using rf magnetron sputtering from an indium (In) metal target. Optical and electrical measurements show that these as-grown films are n-type with carrier concentrations ranging from 10{sup 20} to 10{sup 21} cm{sup -3}. This variation in carrier density is produced by controlling the conditions during the deposition. We used Rutherford backscattering spectrometry to identify possible sources for n-type carriers. We found that in addition to strong direct bandgap optical absorption ranging from 1.4 to 2.0 eV, a large plasmon absorption peak in the infrared region (0.45-0.8 eV) is also observed. This tunable IR absorption suggests that these highly degenerate InN films could be used for a number of applications, including optical filters and infrared devices.

36 MATERIALS SCIENCE↗

Repeat Sequence Proteins as Matrices for Nanocomposites

Recombinant protein-inorganic nanocomposites comprised of exfoliated Na+ montmorillonite (MMT) in a recombinant protein matrix based on silk-like and elastin-like amino acid motifs (silk elastin-like protein (SELP)) were formed via a solution blending process. Charged residues along the protein backbone are shown to dominate long-range interactions, whereas the SELP repeat sequence leads to local protein/MMT compatibility. Up to a 50% increase in room temperature modulus and a comparable decrease in high temperature coefficient of thermal expansion occur for cast films containing 2-10 wt.% MMT.

59 BASIC BIOLOGICAL SCIENCES↗