Search NASA⌕ Search

Engineering topics

Nakada, Y.

Publications and source records attributed to Nakada, Y..

A reference high-pressure CH4 adsorption isotherm for zeolite Y: results of an interlaboratory study

Abstract This paper reports the results of an international interlaboratory study led by the National Institute of Standards and Technology (NIST) on the measurement of high-pressure surface excess methane adsorption isotherms on NIST Reference Material RM 8850 (Zeolite Y), at 25 °C up to 7.5 MPa. Twenty laboratories participated in the study and contributed over one-hundred adsorption isotherms of methane on Zeolite Y. From these data, an empirical reference equation was determined, along with a 95% uncertainty interval ( U k =2 ). By requiring participants to replicate a high-pressure reference isotherm for carbon dioxide adsorption on NIST Reference Material RM 8852 (ZSM-5), this interlaboratory study also demonstrated the usefulness of reference isotherms in evaluating the performance of high-pressure adsorption experiments.

Nguyen, H. G. T. (ORCID:0000000210527565)↗

High-resolution spectra of the 3.29 micron interstellar emission feature - A summary

High spectral resolution observations of the 3.29-micron interstellar emission feature show two types of profiles. Type 1 has a central wavelength of 3.289-micron and is observed in extended objects such as planetary nebulae and H II regions. Type 2 has a central wavelength of 3.296 microns and is observed around a small number of stellar sources. Type 2 has a full width at half-maximum of 0.020 micron; Type 1 has a broader FWHM, perhaps as much as 0.042 micron, but this is uncertain because of contamination by Pf(delta) emission. These profiles are tabulated for comparison to laboratory data. It is found that no proposed identification for the 3.29-micron emission feature definitely matches the observational spectra, although amorphous aromatic materials and heated polycyclic aromatic hydrocarbons tend to fit the best.

Tokunaga, A. T.↗

The 3.3 micron feature, H2, and ionized gas in the Orion bar

The results of spectroscopy of the 3.3 micron feature, H2 emission, P-alpha, and Br-alpha, obtained along a line perpendicular to the Orion ionization front, are presented. The intensity of the 3.3 micron feature reaches a maximum between the ionization front and the H2 peak. The 3.33 micron spatial distribution appears to be due to destruction of the emitting material within the H II region and extinction of the exciting radiation between the edge of the H II region and the H2 peak, resulting in a maximum between the ionization front and the H2 peak. The H2 peak is consistent with either being due to a shock front or being due to UV-pumped fluorescence from dense clumps of H2. The width of the 3.3 micron feature observed at high spectral resolution is constant in regions of varying UV flux. It is suggested that the strength of the UV field is not the cause of the variations in the 3.3 micron feature width observed in other sources, but rather that these variations are caused by a compositional change related to the age of the emitting material.

Sellgren, K.↗

The circumstellar dust envelopes of red giant stars. I - M giant stars with the 10-micron silicate emission band

Spherical dust envelope models of red giant stars are constructed by solving the radiative transfer equations of the generalized two-stream Eddington approximation. The IRAS observations of M giant stars which show the 10-micron silicate emission band in IRAS LRS spectra are explained by the models with the dirty silicate grains with K proportional to lambda exp -1.5 for lambda greather than 28 microns. Under the assumption of steady mass flow in the envelope, this model analysis gives the following conclusions: (1) the strength of the silicate emission peak at 10 microns is a good indicator of the mass loss rate of the star, (2) no stars with the 10-microns silicate emission feature are observed in the range of mass loss rate smaller than 7 x 10 to the -8th solar mass/yr, and (3) the characteristic time of the mass loss process of M stars does not exceed a few 10,000 years.

Hashimoto, O.↗

High-spectral resolution observations of the 3.29 micron emission feature: Comparison to QCC and PAHs

Two of the most promising explanations for the origin of the interstellar emission features observed at 3.29, 3.4, 6.2, 7.7, 8.6, and 11.3 microns are: quenched carbonaceous composite (QCC) and polycyclic aromatic hydrocarbons (PAHs). High resolution spectra are given of the 3.29 micron emission feature which were taken with the Cooled Grating Array Spectrometer at the NASA Infrared Telescope Facility and previously published. These spectra show that the peak wavelength of the 3.29 micron feature is located at 3.295 + or - 0.005 micron and that it is coincident with the peak absorbance of QCC. The peak wavelength of the 3.29 micron feature appears to be the same in all of the sources observed thus far. However, the width of the feature in HD 44179 and Elias 1 is only 0.023 micron, which is smaller than the 0.043 micron width in NGC 7027, IRAS 21282+5050, the Orion nebula, and BD+30 deg 3639. Spectra of NGC 7027, QCC, and PAHs is shown. QCC matches the 3.29 micron interstellar emission feature very closely in the wavelength of the peak, and it produces a single feature. On the other hand, PAHs rarely match the peak of the interstellar emission feature, and characteristically produce multiple features.

Tokunaga, Alan T.↗

Mapping and spectroscopy of the 3.3 microns feature in Orion

The results of spectroscopy of the 3.3 microns feature, H2 emission, and Br alpha, obtained in a spatial cut across the Orion ionization front are presented. The spatial distribution of the 3.3 microns feature peaks between the ionization front and the H2 peak are observed. The shape of the 3.3 microns feature observed at high spectral resolution shows no changes in regions of varying ultraviolet flux and density. The results are discussed in terms of current models for the 3.3 microns emission feature.

Sellgren, K.↗

More interstellar emission features at 3.3-3.6 micrometers!

The present data set consists of 3.20 to 3.55 micron spectra of HD44179, NGC 7027, BD+30 3639, and Elias 1 obtained with a cooled-grating array spectrometer (CGAS) at the NASA Infrared Telescope Facility. Emission features and details of the emission feature profiles are presented for high resolution spectra. Greater complexity is shown than might be expected. It is significant that the 3.29 micron feature has an invariant central wavelength, even at high resolution, and this strongly supports the case for a very specific substance or mixture of substances which is giving rise to this feature.

Tokunaga, A. T.↗

Infrared variability of SS 433

New JHKLM photometry of SS 433 showing short time scale variabilities is reported for the period of 1983 July 16-22 UT. The entire body of infrared data included in this paper, Giles et al. (1980), and Catchpole et al. (1981), is examined with reference to periods of 164 days and 13.08 days. Comparison of the infrared light curves with the optical light curves of Leibowitz et al. (1984) makes it possible to conclude, within the context of an accretion disk model, that the majority of the infrared flux in the SS 433 system comes from the disk, and that the hot spot responsible for the 'hump' in the visual and infrared light curves has a color similar to the average of the disk. A two-dimensional Fourier analysis of the infrared data suggests that the brightness maximum occurs when, seen from the compact star, the noncompact companion passes through a fixed elongation relative to the disk line of nodes with the orbital plane, if the precession is prograde.

Kodaira, K.↗