Search NASA⌕ Search

Engineering topics

Neil S. Rodrigues

Publications and source records attributed to Neil S. Rodrigues.

13 records
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Advancements in Burst-Mode Filtered Rayleigh Scattering for High-Speed Gas-Phase Multi-Parameter Measurements

Filtered Rayleigh scattering (FRS) can be used for velocity, density, temperature, and/or pressure measurements over a wide range of non-reacting flow conditions as well as more limited reacting flow conditions. However, the application of FRS to gas-phase measurements in large-scale test facilities can be limited due to low signal levels, strong background interferences, or the requirement for multiple cameras and/or molecular filters to spectrally resolve the signal. This work focuses on the spectral characteristics and wavelength-agility of burst-mode lasers for use in FRS systems. These advancements could improve measurement capability and data quality in applications with high levels of stray background scattering as well as where increased temporal resolution is desirable, such as high-speed flows.

filtered Rayleigh scattering↗
NASA NTRSDate not supplied

Demonstration of Frequency-Scanning Burst-mode Filtered Rayleigh Scattering for Multi-Parameter Gas-Phase Measurements

Filtered Rayleigh scattering (FRS) is a diagnostic technique used for measurements of macroscopic properties of a gas. The FRS signal is passed through a narrow bandwidth molecular filter, commonly gaseous iodine, to measure the broadening and Doppler-shift of the scattering light from the molecules of the gas flow. However, in single-frequency, intensity-based approaches, the effects of pressure, temperature, and velocity can be difficult to deconvolve. To overcome this challenge, frequency-scanning FRS has been used to quasi-spectrally resolve the signal. In this work, a frequency-scanned, burst-mode laser was used to perform scanning FRS in an underexpanded jet to measure temperature, pressure, and radial velocity at measurement rates up to 1 kHz which is ~100,000 times faster than prior implementations of scanning FRS.

filtered Rayleigh scattering↗
NASA NTRSDate not supplied

Flow Visualization of Intrusive and Non-Intrusive Configurations for Lunar- and Martian-Relevant Plume-Surface Interaction

Flow visualization of a heated, inert-gas plume impinging onto a rigid surface was performed in lunar- and Martian-relevant pressure conditions. The experimental campaign was part of a broader effort to improve predictive models and capabilities for plume-surface interactions in spacecraft landing environments relevant to the Moon and Mars. The experiments used the planar laser induced fluorescence (PLIF) technique to visualize the flow of the jet over both a full-plane configuration using a flat impingement plate and a half-plane configuration where the jet flow was bisected by a splitter edge mounted to the impingement plate. The latter configuration has been previously used to study erosion mechanisms in plume-surface interactions because the technique enables cross-sectional optical access for visualizing the plume-induced crater. However, this approach has some uncertainty regarding the influence of the splitter edge on the flow field. The present work evaluates the differences in flow structures and characteristics between the flat plate and splitter plate experimental configurations at eight unique test conditions with and without the splitter edge where the vacuum chamber pressure, nozzle mass flow rate, and height of the nozzle were varied. Several features are identified which differ between the flat plate and splitter plate comparison cases, and these are summarized in this paper. The results presented provide insights to the differences between intrusive and non-intrusive experimental configurations for plume-surface interaction studies that can be used to further validate predictive models and inform future ground and flight test results.

PLIF↗
NASA NTRSDate not supplied

Development of a fs/Ps CARS System for Temperature Measurements Within Supersonic and Hypersonic Environments

A hybrid femtosecond/picosecond coherent anti-Stokes Raman scattering (fs/ps CARS) system was developed for quantitative measurements of temperature in a laboratory-scale supersonic jet facility. Measurements were recorded at low pressures and densities relevant for supersonic and hypersonic environments, with special interest in exploring the feasibility of deploying this technique in the 20-inch Mach 6 and 31-inch Mach 10 wind tunnels located at NASA Langley Research Center. Modifications to the existing supersonic jet facility were made to simulate a test section with a width of 31 inches, so that the size of the test section is relevant for either wind tunnel. The CARS system was designed such that a similar beam geometry can be used in the laboratory to acquire point-based fs/ps CARS measurements along two axes of translation. Rotational Raman transitions of O 2 and N 2 were targeted.

CARS↗
NASA NTRSDate not supplied

Review of planar laser-induced fluorescence measurements in the NASA Langley 31-Inch Mach 10 Air Tunnel

In 2003 a mobile planar laser-induced fluorescence (PLIF) system was constructed at NASA Langley Research Center to visualize and quantify high speed flow fields containing fluorescent species such as nitric oxide (NO). Thereafter, a series of test entries utilizing NO PLIF were conducted in the NASA Langley Research Center’s 31 Inch Mach 10 air wind tunnel, which is a hypersonic blowdown wind tunnel located in Hampton, Virginia. This paper briefly reviews laser-based measurements previously performed in hypersonic blowdown wind tunnel facilities and then details NO PLIF measurement campaigns performed at this facility in the 20 years to date. Measurements were performed to develop 2D and 3D visualization capabilities and quantitatively measure velocity and temperature. Applications described herein include historical models (e.g., Apollo, X-33 and X-43), flight vehicles under development at the time (e.g., Mars Science Lab (MSL), Orion, and LOFTID), as well as fundamental research (e.g., flat plates with and without discrete roughness).

PLIF↗
NASA NTRSDate not supplied

Flow Visualization for Plume-Surface Interaction at Martian-Relevant Lander Environments

This paper describes a jet impingement experiment performed in a large-scale vacuum chamber at Martian-relevant ambient pressure conditions, with the motivation of studying plume-surface interaction (PSI) caused by the exhaust plume of a lander interacting with the planetary surface. Flow visualization of an inert supersonic jet was performed using planar laser-induced fluorescence (PLIF), which is a molecular-based, two-dimensional measurement technique. Representative instantaneous and time-averaged visualizations of the impinging jet at two different nozzle flow conditions corresponding to the underexpanded and overexpanded jet regimes are presented for up to six different dimensionless altitudes h/De. The time-averaged measured spatial distribution of impingement pressures at these conditions is also reported. The PLIF visualizations appear to be critical towards explaining unexpected behavior in the impingement pressure, such as a higher impingement pressure for the underexpanded condition at h/De = 10, compared to a lower altitude of h/De = 8. This behavior can be attributed to differences in the stagnation shock structure observed in the PLIF images. The PLIF images also reveal significant flow separation at the nozzle exit for the overexpanded jet conditions. Further analysis of the test data as well as combined flow visualization and surface diagnostics for future ground tests will help inform engineering designs for landings on the Martian surface while mitigating PSI risks.

PLIF↗
NASA NTRSDate not supplied

PLIF for Space Technology and Exploration Applications

Highlights from recent PLIF test campaigns at large-scale NASA facilities and lab-scale developments are summarized. The measurements presented here have the potential to aid researchers in validating complex simulations and inform designs for spaceflight vehicles.

PLIF↗
NASA NTRSDate not supplied

Mechanisms of Ejecta Streak Formation During Spacecraft Landings on the Moon

When landing on another planetary body, spacecraft most often employ retropropulsion to decelerate for a soft landing. This process generates a crater and ejects high-speed particles, which can destabilize the lander and pose risks to nearby infrastructure. From the Apollo missions in the 1960s to the recent Chang'E-5 mission, particles leave the impingement region as streak filaments, regardless of landing site, lander mass, or thrust. This study aims to uncover the mechanism behind the formation of these ejecta streaks.

PSI↗
NASA NTRSDate not supplied

Wall-Jet Evolution During Plume-Surface Interaction Using PLIF Imaging

Planar laser-induced fluorescence (PLIF) flow visualization was used to examine the spatial evolution for the wall-jet formed by an impinging supersonic jet in a large-scale vacuum environment. This canonical configuration is representative of the plume-surface interaction induced by a rocket exhaust plume impinging on the planetary surface at lunar-relevant and Martian-relevant environments. PLIF flow visualization of the very low-density environment (as low as ~0.006% of standard atmospheric density) was performed using seeded nitric oxide in a nitrogen flow at three test conditions. Two conditions are representative of the lunar environment, and one is representative of the Martian environment. The combined images from two simultaneous PLIF views were used to construct a 2D slice of the flowfield spanning approximately 150 mm in height (determined by the laser sheet) and 500 mm in width (determined by the camera views). The three test conditions showed different behavior for the wall-jet, largely due to the different levels of lifting above the surface and the appearance of a physical process similar to a Kelvin–Helmholtz instability for the Martian-relevant case, which appeared to create a dramatic expansion of the wall-jet height with increased radial distance.

PSI↗