Search NASA⌕ Search

Engineering topics

Neil, Chelsea Wren

Publications and source records attributed to Neil, Chelsea Wren.

Carbon Mineralization in Fractured Mafic and Ultramafic Rocks: A Review

Mineral carbon storage in mafic and ultramafic rock masses has the potential to be an effective and permanent mechanism to reduce anthropogenic CO 2 . Several successful pilot-scale projects have been carried out in basaltic rock (e.g., CarbFix, Wallula), demonstrating the potential for rapid CO 2 sequestration. However, these tests have been limited to the injection of small quantities of CO 2 . Thus, the longevity and feasibility of long-term, large-scale mineralization operations to store the levels of CO 2 needed to address the present climate crisis is unknown. Moreover, CO 2 mineralization in ultramafic rocks, which tend to be more reactive but less permeable, has not yet been quantified. In these systems, fractures are expected to play a crucial role in the flow and reaction of CO 2 within the rock mass and will influence the CO 2 storage potential of the system. Therefore, consideration of fractures is imperative to the prediction of CO 2 mineralization at a specific storage site. In this review, we highlight key takeaways, successes, and shortcomings of CO 2 mineralization pilot tests that have been completed and are currently underway. Laboratory experiments, directed toward understanding the complex geochemical and geomechanical reactions that occur during CO 2 mineralization in fractures, are also discussed. Experimental studies and their applicability to field sites are limited in time and scale. Many modeling techniques can be applied to bridge these limitations. We highlight current modeling advances and their potential applications for predicting CO 2 mineralization in mafic and ultramafic rocks.

25 ENERGY STORAGE↗

A novel in-situ Raman spectroscopic cell for aqueous geochemistry at the solid–liquid interface

In-situ Raman spectroscopy has the potential to be a powerful technique for monitoring geochemical reactions at a solid–liquid interface in real time. In this article, we present the development and testing of an in-situ Raman spectroscopic cell, which can be used for reaction systems at moderate temperatures and pressure [<1000 psi (6.89 MPa), <100 °C, relevant to subsurface geologic systems] and can hold samples large enough for chemical mapping of heterogeneous rock surfaces. The system is validated by measuring the temperature-dependent conversion of gypsum to calcite over time. Near total conversion of gypsum to calcite on the mineral surface took 29 hours at room temperature and 150 minutes at 100 °C, corresponding to an 11.6-fold increase in the conversion rate. Further, we anticipate that this cell can be an important tool in quantifying the rates of carbon mineralization relevant to geologic carbon sequestration, particularly for the elevated rates recently observed in mafic/ultramafic rocks.

47 OTHER INSTRUMENTATION↗

Small-Angle Neutron Scattering Investigation of Oil Recovery in Mineralogically Distinct Wolfcamp Shale Strata

Understanding and improving hydrocarbon yields during enhanced oil recovery (EOR) in unconventional reservoirs is complicated by the intrinsic mineralogical and geochemical heterogeneity of shale formations. Here, in this study, we utilized small-angle neutron scattering (SANS) and ultra-small-angle neutron scattering (USANS) to investigate the degree of oil retention and its location in the nanoporous shale matrix for two mineralogically distinct shale samples. The two samples, dubbed “dark” and “light” based on their color, were taken from adjacent strata in a Wolfcamp shale core. While both samples contained kerogen, the dark sample contained more kerogen and clay (43.7 wt %) while the light sample contained more calcite (54.9 wt %). Samples were presaturated with decane, a model hydrocarbon, prior to pressure cycling with methane. Results showed significantly more retention of decane in 1.5–10 nm radius pores of both, likely indicating that oil is retained within kerogen nanopores. Although the dark sample had a higher porosity of 8.7%, versus 3.3% for the light sample, more pores were accessible to decane and a higher percentage of the imbibed decane was removable from the light sample compared to the dark sample. The majority of decane was not recoverable for the dark sample, indicating that EOR with methane can be challenging. These new findings can help to model expected recoveries of in-place oil from heterogeneous shale formations, as well as inform improved EOR strategies.

04 OIL SHALES AND TAR SANDS↗

Gas diffusion through variably-water-saturated zeolitic tuff: Implications for transport following a subsurface nuclear event

Noble gas transport through geologic media has important applications in the characterization of underground nuclear explosions (UNEs). Without accurate transport models, it is nearly impossible to distinguish between xenon signatures originating from civilian nuclear facilities and UNEs. Understanding xenon transport time through the earth is a key parameter for interpreting measured xenon isotopic ratios. One of the most challenging aspects of modeling gas transport time is accounting for the effect of variable water saturation of geological media. In this study, we utilize bench-scale laboratory experiments to characterize the diffusion of krypton, xenon, and sulfur hexafluoride (SF6) through intact zeolitic tuff under different saturations. Here, we demonstrate that the water in rock cores with low partial saturation dramatically affects xenon transport time compared to that of krypton and SF6 by blocking sites in zeolitic tuff that preferentially adsorb xenon. This leads to breakthrough trends that are strongly influenced by the degree of the rock saturation. Xenon is especially susceptible to this phenomenon, a finding that is crucial to incorporate in subsurface gas transport models used for nuclear event identification. We also find that the breakthrough of SF6 diverges significantly from that of noble gases within our system. When developing field scale models, it is important to understand how the behavior of xenon deviates from chemical tracers used in the field, such as SF6 (Carrigan et al., 1996). These new insights demonstrate the critical need to consider the interplay between rock saturation and fission product sorption during transport modeling, and the importance of evaluating specific interactions between geomedia and gases of interest, which may differ from geomedia interactions with chemical tracers.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Geochemistry in support of LANL's national and energy security missions [Slides]

Geochemistery is a field of science that uses chemistry to explain processes occurring within geological systems. It can encompass interconnected fields of geology, hydrology, biology, and atmospheric science as they relate to natural processes in the environment. Geochemistry can play an important role in mission-critical LANL research areas of science of signatures and complex natural and engineered systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Laboratory Investigation of Gas Transport Through Variably Saturated Rock [Slides]

Project Overview: Noble gas fission products, such as xenon (Xe), are monitored to detect nuclear tests. For well-contained subsurface tests, transport to the surface will impact detected isotopic ratios, complicating event identification. Role of water saturation in subsurface transport is not well understood. Historic tests have taken place near or below the water table. To accurately predict breakthrough times and fractionation, gas transport must be characterized through intact rock with variable saturation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Arsenite oxyanions affect CeO 2 nanoparticle dissolution and colloidal stability

While highly reactive cerium oxide nanoparticles (CeO 2 NPs) are widely used in industry, their transport in aquatic systems is not well understood. To fill this knowledge gap, the interactions of CeO 2 NPs with arsenite (As 3+ ), a toxic metalloid and potential co-present contaminant, were investigated with respect to CeO 2 NP colloidal stability, dissolution, and surface redox reactions. Arsenite showed distinctive effects at different concentrations, with a high As 3+ concentration (10 –4 M) inducing 90% of CeO 2 NPs to settle from solution after 8 hours, while lower As 3+ concentrations (10 –5 or 10 –6 M) led to only 20% of CeO 2 NPs settling. The dissolution of NPs was most significant in the 10 –5 M As 3+ system owing to a lesser extent of aggregation, exposing more CeO 2 surface for dissolution. In the three As 3+ concentration systems, >97% of aqueous arsenic remained as As 3+ over 6 hours. On the NP surface, adsorbed As III was oxidized to As V , resulting in 58–70% of the adsorbed arsenic remaining as As III . Simultaneously Ce IV was reduced to Ce III , increasing Ce III on the CeO 2 NP surface from 17% (without arsenite) to 21–25% (with arsenite). Further mechanistic analyses revealed that the adsorption of arsenite was the main contributor to neutralizing the CeO 2 NP surface potential, enhancing particle sedimentation. These findings suggest that the fate and transport of CeO 2 NPs in our experimental systems are strongly affected by arsenite concentration and its adsorption on NPs. Here, the results also highlight the importance of the interplay between NP aggregation, oxidation, and dissolution in predicting the behaviors of CeO 2 NPs and associated toxic elements in aquatic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Iodine effective diffusion coefficients through volcanic rock: Influence of iodine speciation and rock geochemistry

Accurate prediction of the subsurface transport of iodine species is important for the assessment of long-term nuclear waste repository performance, as well as monitoring compliance with the Comprehensive Nuclear-Test-Ban Treaty, given that radioiodine decays into radioxenon. However, the transport of iodine through intact geologic media is not well understood, compromising our ability to assess risk associated with radioiodine migration. The current study's goal is to quantify the matrix diffusion of iodine species through saturated volcanic rock, with particular attention paid to the redox environment and potential speciation changes. Here, diffusion experiments were run for iodide through lithophysae-rich lava, lithophysae-poor lava, and welded tuff, whereas iodate diffusion was studied through welded tuff. Iodine transport was compared with a conservative tracer, HDO, and effective diffusion coefficients were calculated. Likely due to a combination of size and anion exclusion effects, iodine species diffused more slowly than the conservative tracer through all rock types tested. Furthermore, oxidation of iodide to iodate was observed in the lithophysae-poor lava, affecting transport. Results provide much needed data for subsurface transport models that predict radioiodine migration from underground sources, and indicate the pressing need for geochemical and redox interactions to be incorporated into these models.

58 GEOSCIENCES↗