Search NASA⌕ Search

Engineering topics

Nesterenko, Igor N

Publications and source records attributed to Nesterenko, Igor N.

PROTOTYPE LASER EMITTANCE SCANNER FOR SNS ACCELERATOR

Taking Advantage of recent successes with the Laser Profile monitor, a new prototype is being built to use the laser wire as both a profile monitor and a slit for an emittance measuring device. This improved system takes advantage of the steering dipole magnet prior to ring injection of SNS such that only the recently stripped H0 protons continue forward to the emittance device. In this way we hope to make an emittance device that is both parasitic to neutron production, and capable of accurate measurements during full power applications.

43 PARTICLE ACCELERATORS↗

MEASUREMENT AND DETAILED SIMULATION OF BEAM LOSSES CAUSED BY THIN INTERCEPTION DEVICES (WIRE SCANNERS, SCRAPERS) AT SNS

Conversion of BLM readings between into number of lost particles is a challenging task. Any insertion device is a good mean to obtain a localized loss and obtain such conversion factor with direct measurement. Such a measurement serves as a good benchmark for Monte-Carlo simulation of radiation transport. We used wire scanners and scraper induced losses to perform analysis of BLM response to local loss. The paper also provides a technique to measure 0.1% of full beam charge being intercepted by scraper during 650kW production run extracting the useful signal from high noise (20 times higher than signal) environment

Zhukov, Alexander P↗

THE LASER EMITTANCE SCANNER FOR 1 GEV H- BEAM

A transverse phase space laser emittance scanner is proposed [1] and under development for the 1-GeV H- SNS linac, using a laser beam as a slit. For a 1-GeV H- beam, it is difficult to build a slit because the stopping distance is more than 50 cm in copper. We propose a Laser Emittance Scanner (LES) to use a laser beam as an effective slit by stripping off the outer electron of the H- (making it neutral) upstream of a bend magnet and measuring the stripped component downstream of the bend magnet. The design and modeling of the system will be discussed. We are expecting to make a preliminary measurement in 2009.

43 PARTICLE ACCELERATORS↗