Engineering topics
Publications and source records attributed to Neugebauer, W..
Special lens shaping allows variation of focusing strength with radius. Lens can be either converging or diverging depending on charge of particles and direction of angular magnetic field. There is potential use for lens in particle analyzers, electron beam welding systems, microwave tube refocusing systems, and possible display type devices.
Analytic methods were developed and employed to optimize the magnetic field transition region between the output interaction gap of a klystron and a multi-stage depressed potential electrostatic beam collector, in order to enhance the power conversion efficiency of satellite-borne broadcast transmitters. Permanent magnet structures were designed to provide the magnetic field distributions required to expand and recollimate the spent electron beam of the power amplifier klystron for proper entry into the beam collector. These design criteria for magnetic field distributions for expanding and recollimating spent-beam electrons for optimal entry into a multi-stage depressed potential collector are generally applicable to traveling-wave tubes as well as klystrons.
A ten-stage electrostatic depressed collector, designed with the aid of an analog computer, was tested on a 1-kW CW 750-MHz klystron. Excellent correlation was achieved between computed and measured performance under varying conditions of RF drive. At full RF power output approximately 60 per cent of the spent beam energy was recovered by use of the depressed collector. The net power conversion efficiency of the tube was raised from its undepressed value of 54.3 per cent to approximately 70.9 per cent. At one-half full power output, a collector efficiency of 70 per cent was measured. At zero RF power output collector efficiency was 80 per cent. To achieve these results it was necessary to install a small focusing coil between the final drift tube and the collector. No spurious oscillations or instabilities were detected when collector depression was employed, nor was electron backstreaming increased significantly. Intentional short circuiting of adjacent collector electrode pairs was shown to cause only minor degradation in collector performance.
Computational method for determining performance of ten stage electrostatic depressed collector for klystrons
Klystron power conversion efficiency augmentation by electrostatic depressed collector design, presenting performance prediction calculation method
Multistage depressed electrostatic collector for magnetically focused spaceborne klystrons
Analytic evaluation of depressed collector for linear beam microwave amplifiers