Search NASA⌕ Search

Engineering topics

Newsom, Rob

Publications and source records attributed to Newsom, Rob.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Large-eddy simulation of an atmospheric bore and associated gravity wave effects on wind farm performance in the southern Great Plains

Gravity waves are a common occurrence in the atmosphere, with a variety of generation mechanisms. Their impact on wind farms has only recently gained attention, with most studies focused on wind farm-induced gravity waves. In this study, the interaction between a wind farm and gravity waves generated by an atmospheric bore event is assessed using multiscale large-eddy simulations. The atmospheric bore is created by a thunderstorm downdraft from a nocturnal mesoscale convective system (MCS). The associated gravity waves impact the wind resource and power production at a nearby wind farm during the American Wake Experiment (AWAKEN) in the US southern Great Plains. A two-domain nested setup (Δx=300 and 20 m) is used in the Weather Research and Forecasting (WRF) model, forced with data from the High-Resolution Rapid Refresh model, to capture both the formation of the bore and its interaction with individual wind turbines. The MCS is resolved on the large outer domain, where the structure of the bore and the associated gravity waves are found to be especially sensitive to parameterized microphysics processes. On the finer inner domain, gravity wave interactions with individual wind turbines are resolved; wake dynamics are captured using a generalized actuator disk parameterization in WRF. The gravity waves are found to have a strong effect on the atmosphere above the wind farm; however, the effect of the waves is more nuanced closer to the surface where there is additional turbulence, both ambient and wake-generated. Notably, the gravity waves modulate the mesoscale environment by weakening and dissipating the preexisting low-level jet, which reduces hub-height wind speed and hence the simulated power output, which is confirmed by the observed supervisory control and data acquisition (SCADA) power data. Additionally, the gravity waves induce local wind direction variations correlated with fluctuations in pressure, which lead to fluctuations in the simulated power output as various turbines within the farm are subjected to waking from nearby turbines.

17 WIND ENERGY↗
DOE OSTI2024

Lidar / Processed Data

These data include scanning Doppler lidar measurements from the deployment of the PNNL HALO XR+ (s/n 184) at the Nantucket site. The measurements include calibrated beam azimuth angles, radial velocity, backscatter, signal to noise ratio per each line of sight, and range-gate. The data are provided in NetCDF.

17 WIND ENERGY↗
DOE OSTI2024

Land-based wind plant wake characterization using dual-Doppler radar measurements at AWAKEN

Wind plant wakes have been shown to persist for tens of kilometers downstream in offshore environments, reducing the power output of neighboring plants, but their behavior on land remains relatively unexplored through observation. This study capitalizes on the unique and extensive field data collected for the American WAKE ExperimeNt (AWAKEN) project underway in northern Oklahoma. X-band dual-Doppler radars deployed at this site measure wind speed and direction at 25-m and 2-min resolution within a 30-km range, capturing the interactions between three neighboring wind plants. These measurements show that the wake of one wind plant extends at least 15 km downstream under easterly wind and stable atmospheric conditions. Though the wake wind speed increases within the first 10 km, it plateaus at 90% of the freestream wind speed. The spanwise velocity distribution within the wake initially shows the clear signature of the wind plant layout, which is smoothed as it propagates downstream, indicating spanwise momentum transfer is a key mechanism in wind plant wake development and recovery. These findings have important implications for wind plant siting decisions and resource assessments, and provide insights into atmospheric interactions at the wind plant scale.

17 WIND ENERGY↗
DOE OSTI2024

10min Lidar Winds/ Derived Data

This dataset contains 10-min averaged, motion-corrected wind profiles from the WindCube lidar during the deployment of the DOE WindSentinel buoy near Oahu, Hawaii. The attached Lidar Buoy Data Dictionary provides further details on the various instruments on the buoy, parameters measured by each instrument, and the frequency of data collection.

17 WIND ENERGY↗
DOE OSTI2024

1Hz Lidar Winds / Reviewed Data

This dataset contains 1Hz, motion-corrected wind profiles from the WindCube lidar during the deployment of the DOE WindSentinel buoy near Oahu, Hawaii. The attached Lidar Buoy Data Dictionary provides further details on the various instruments on the buoy, parameters measured by each instrument, and the frequency of data collection.

17 WIND ENERGY↗
DOE OSTI2024

Doppler Lidar Motion-Correction (DLMC) Value-Added Product Report

The U.S. Department of Energy Atmospheric Radiation Measurement (ARM) second ARM Mobile Facility (AMF2) Doppler lidar (S/N 0319-160) was deployed on the German ice breaker Polarstern during the Multidisciplinary Drifting Observatory for the Study of Arctic Climate (MOSAiC) campaign during 2019-2020 (see Figure 1). This was the first deployment of the new AMF2 Doppler lidar, as well as the first ship-based deployment of a Doppler lidar (DL) by ARM. In contrast to land-based deployments, the lidar’s heading (a.k.a. home point) and tilt are constantly changing, and lidar’s radial velocity measurements are impacted by the ship’s motion. Since the beam directions are reported relative to the instrument’s frame of reference, derivation of higher-order data products such as wind speed and direction require that the lidar’s attitude and translational velocity be properly accounted for. The Doppler Lidar Motion-Correction (DLMC) Value-Added-Product (VAP) was developed specifically for ship-based deployments of the Doppler lidar. This VAP combines raw uncorrected data from the DL and simultaneous measurements from the ARM Navigation system (NAV) (Walton 2019) to transform the beam angles from the lidar coordinate system to an Earth-fixed coordinate system. The VAP also removes the contribution of the lidar’s platform velocity from the radial velocity measurements. This report documents the methods used by the DLMC to perform these corrections.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

PNNL Scanning Doppler Lidar (S/N 184) / Raw Data

This dataset contains raw data from the PNNL scanning Doppler lidar (S/N 184), consisting of range- and time-resolved measurements of radial velocity, attenuated backscatter, intensity, and spectral width. We note that the beam azimuth angles are NOT referenced to true north.

17 WIND ENERGY↗
DOE OSTI2024

Doppler Lidar Motion-Correction Wind Profiles (DLMCPROF-WIND) Value-Added Product Report

Wind speed and direction, together with pressure, temperature, and relative humidity, are the most fundamental atmospheric state parameters. Accurate measurement of these parameters is crucial for numerical weather prediction. Vertically resolved wind measurements in the atmospheric boundary layer are particularly important for modeling pollutant and aerosol transport. The U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility currently operates several scanning coherent Doppler lidar (DL) systems that provide accurate height-resolved measurements of wind speed and direction. These instruments operate in the near infrared (IR;1.5 microns) and provide range-resolved measurements of radial velocity, attenuated aerosol backscatter, and signal-to-noise ratio (SNR). The systems are operated using a fixed scan schedule consisting of plan position indicator (PPI) or Doppler Beam-Swing (DBS) scans. PPI scans are performed by scanning the beam in azimuth while maintaining a fixed elevation angle, and DBS scans are similar but typically also include a vertical beam. Radial velocity data from these scans are processed to yield profiles of wind speed direction. For stationary ground-based deployments, the Doppler Lidar Horizontal Wind Profiles (DLPROF-WIND) Value-Added-Product (VAP) provides height- and time-resolved measurements of the winds (Newsom and Krishnamurthy 2022). For operation on a moving platform, modifications to the existing DLPROF-WIND VAP are required to compensate for the effects of the platform motion. This report describes a parallel VAP, DLMCPROF-WIND, that was developed for computing motion-compensated wind profiles from ARM Doppler lidar data acquired during the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) campaign, when the lidar was deployed on the German icebreaker Polarstern.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

dlfpt2.b1

Doppler Lidar - Partial Fixed Pointing mode

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

AWAKEN Virtual Tower / Derived Data

Virtual tower data consist of profiles of wind speed and direction at a number of locations near the A1 site. These profiles were computed from dual-Doppler analysis of two Halo XR+ scanning Doppler lidars located at sites A5 and A7. Both lidars performed shallow RHI scans in the general direction of the A1 site. Scan azimuths were periodically adjusted to sample different locations. This resulted in a total of 14 unique tower locations over 5 periods between 12 November 2022 and 17 October 2023.

17 WIND ENERGY↗
DOE OSTI2023

AWAKEN Virtual Tower / Derived Data

Virtual tower data consist of profiles of wind speed and direction at a number of locations near the A1 site. These profiles were computed from dual-Doppler analysis of two Halo XR+ scanning Doppler lidars located at sites A5 and A7. Both lidars performed shallow RHI scans in the general direction of the A1 site. Scan azimuths were periodically adjusted to sample different locations. This resulted in a total of 14 unique tower locations over 5 periods between 12 November 2022 and 17 October 2023.

17 WIND ENERGY↗