Search NASA⌕ Search

Engineering topics

Nguyen, D.

Publications and source records attributed to Nguyen, D..

At least 37 records · Page 2

Measurement of the Ar ( e , e ' p ) and Ti ( e , e ' p ) cross sections in Jefferson Lab Hall A

The E12-14-012 experiment, performed in Jefferson Lab Hall A, has collected exclusive electron-scattering data ( e , e ' p ) in parallel kinematics using natural argon and natural titanium targets. In this study we report the first results of the analysis of the data set corresponding to beam energy 2222 GeV, electron scattering angle 21 . 5 ° , and proton emission angle – 50 ° . The differential cross sections, measured with ≈ 4 % uncertainty, have been studied as a function of missing energy and missing momentum, and compared to the results of Monte Carlo simulations, obtained from a model based on the distorted-wave impulse approximation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Ruling out Color Transparency in Quasielastic 12 C(e,e'p) up to Q 2 of 14.2 (GeV/c) 2

Quasielastic $^{12}$C$(e,e'p)$ scattering was measured at space-like 4-momentum transfer squared $Q^2$ = 8, 9.4, 11.4, and 14.2 (GeV/c)$^2$, the highest ever achieved to date. Nuclear transparency for this reaction was extracted by comparing the measured yield to that expected from a plane-wave impulse approximation calculation without any final state interactions. Additionally, the measured transparency was consistent with no $Q^2$ dependence, up to proton momenta of 8.5 GeV/c, ruling out the quantum chromodynamics effect of color transparency at the measured $Q^2$ scales in exclusive $(e,e'p)$ reactions. Furthermore, these results impose strict constraints on models of color transparency for protons.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Probing the Deuteron at Very Large Internal Momenta

We measure H-2(e, e' p)n cross sections at 4-momentum transfers of Q(2) = 4.5 +/- 0.5 (GeV/c)(2) over a range of neutron recoil momenta p(r), reaching up to similar to 1.0 GeV/c. We obtain data at fixed neutron recoil angles theta(nq) = 35 degrees, 45 degrees, and 75 degrees with respect to the 3-momentum transfer (q)over-right-arrow. The new data agree well with previous data, which reached p(r) similar to 500 MeV/c. At theta(nq) = 35 degrees and 45 degrees, final state interactions, meson exchange currents, and isobar currents are suppressed and the plane wave impulse approximation provides the dominant cross section contribution. We compare the new data to recent theoretical calculations, where we observe a significant discrepancy for recoil momenta P-r > 700 MeV/c.

Yero, C.↗

Novel observation of isospin structure of short-range correlations in calcium isotopes

Short Range Correlations (SRCs) have been identiffed as being responsible for the high momentum tail of the nucleon momentum distribution, n(k). Hard, short-range interactions of nucleon pairs generate the high momentum tail and imprint a universal character on n(k) for all nuclei at large momentum. Triple coincidence experiments have shown a strong dominance of np pairs, but these measurements involve large final state interactions. This paper presents the results from Jefferson Lab experiment E08014 which measured inclusive electron scattering cross-section from Ca isotopes. Here, by comparing the inclusive cross section from 48 Ca to 40 Ca in a kinematic region dominated by SRCs we provide a new way to study the isospin structure of SRCs.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Probing Few-Body Nuclear Dynamics via H 3 and He 3 ( e , e ' p ) pn Cross-Section Measurements

Here, we report the first measurement of the (e, e' p) three-body breakup reaction cross sections in helium-3 ( 3 He) and tritium ( 3 H) at large momentum transfer ($\langle{Q^2}\rangle$ ≈ 1.9 (GeV/c) 2 ) and x B > 1 kinematics, where the cross section should be sensitive to quasielastic (QE) scattering from single nucleons. The data cover missing momenta 40 ≤ p miss ≤ 500 MeV/c that, in the QE limit with no rescattering, equals the initial momentum of the probed nucleon. The measured cross sections are compared with state-of-the-art ab-initio calculations. Overall good agreement, within ±20%, is observed between data and calculations for the full p miss range for 3 H and for 100 ≤ p miss ≤ 350 MeV/c for 3 He. Including the effects of rescattering of the outgoing nucleon improves agreement with the data at p miss > 250 MeV/c and suggests contributions from charge-exchange (SCX) rescattering. The isoscalar sum of 3 He plus 3 H, which is largely insensitive to SCX, is described by calculations to within the accuracy of the data over the entire pmiss range. This validates current models of the ground state of the three-nucleon system up to very high initial nucleon momenta of 500 MeV/c.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Density changes in low pressure gas targets for electron scattering experiments

A system of modular sealed gas target cells has been developed for use in electron scattering experiments at the Thomas Jefferson National Accelerator Facility (Jefferson Lab). This system was initially developed to complete the MARATHON experiment which required, among other species, tritium as a target material. Thus far, the cells have been loaded with the gas species 3 H, 3 He, 2 H, 1 H and 40 Ar and operated in nominal beam currents of up to 22.5 μA in Jefferson Lab's Hall A. While the gas density of the cells at the time of loading is known, the density of each gas varies uniquely when heated by the electron beam. To extract experimental cross sections using these cells, density dependence on beam current of each target fluid must be determined. In this study, data from measurements with several beam currents within the range of 2.5 to 22.5 μA on each target fluid are presented. In addition, expressions for the beam current dependent fluid density of each target are developed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

First measurement of the Ar ( e , e ' ) X cross section at Jefferson Laboratory

The success of the ambitious programs of both long- and short-baseline neutrino-oscillation experiments employing liquid-argon time-projection chambers will greatly rely on the precision with which the weak response of the argon nucleus can be estimated. In the E12-14-012 experiment at Jefferson Lab Hall A, we have studied the properties of the argon nucleus by scattering a high-quality electron beam off a high-pressure gaseous argon target. Here, we present the measured 40 Ar(e,e') double differential cross section at incident electron energy E = 2:222 GeV and scattering angle = 15:541 deg. The data cover a broad range of energy transfers, where quasi-elastic scattering and delta production are the dominant reaction mechanisms. The result for argon is compared to our previously reported cross sections for titanium and carbon, obtained in the same kinematical setup.

43 PARTICLE ACCELERATORS↗

Packed and fluidized bed absorber modeling for carbon capture with micro-encapsulated sodium carbonate solution

Micro-Encapsulated CO 2 Sorbents (MECS) are a promising technology for post-combustion carbon capture because they enable slow-reacting solvents like carbonate solution to compete with traditional amine solvents. Before scaling up MECS for pilot testing, modeling is needed to design a MECS absorber and quantify its size and energy penalty. To that end, a multi-scale model for MECS- that ranges from a single capsule to a 500 MWe power plant absorber- is developed and presented here in this paper. First, the individual capsule model is developed and fitted to experimental CO 2 absorption data collected on a 0.1 g sample of capsules filled with sodium carbonate solution. This capsule model is then validated against data collected on a 25 g batch of capsules exposed to flue gas conditions in a fluidized column. This model is then scaled up to represent two absorber designs: a multi-stage, counter-flow fluidized bed and a hollow, cylindrical packed bed with radial gas flow. These two absorber bed models are first optimized for a 1 MWe pilot-scale absorber, and then optimized for a 500 MWe coal plant. This model predicts absorbers of similar dimensions and smaller energy penalties than previously modeled absorbers filled with amine solvent capsules. Furthermore, it is demonstrated here that a few reasonable improvements to capsule design would result in absorber sizes and energy penalties lower than those of a benchmark amine solvent tower. These results demonstrate that micro-encapsulated carbonate solution can compete with faster-acting amine solvents for post-combustion carbon capture.

20 FOSSIL-FUELED POWER PLANTS↗

Search for three-nucleon short-range correlations in light nuclei

Here, we present new data probing short-range correlations (SRCs) in nuclei through the measurement of electron scattering off high-momentum nucleons in nuclei. The inclusive 4 He/ 3 He cross section ratio is observed to be both x and Q 2 independent for 1.5 < x < 2, confirming the dominance of two- nucleon (2N) short-range correlations (SRCs). For x > 2, our data do not support a previous claim of three-nucleon (3N) correlation dominance. While contributions beyond those from stationary 2N- SRCs are observed, our data show that isolating 3N-SRCs is more complicated than for 2N-SRCs.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Spray flow structure from twin-hole diesel injector nozzles

Two techniques were used to study non-evaporating diesel sprays from common rail injectors which were equipped with twin-hole and single-hole nozzles for comparison. To characterise the sprays, high speed optical imaging and x-ray radiography were used. The former was performed at the LTRAC laboratory at Monash University, while the latter was performed at the 7-BM beamline of the Advanced Photon Source at Argonne National Laboratory. The optical imaging made use of high temporal, high spatial resolution spray recordings on a digital camera from which peripheral parameters in the initial injection phase were investigated based on edge detection. The x-ray radiography was used to explore quantitative mass distributions, which were measured on a point-wise basis at roughly similar sampling rate. Three twin-hole nozzles of different subtended angles and a single-hole nozzle were investigated at injection pressure of 1000 bar in environments of 20 bar back pressure. Evidence of strong cavitation was found for all nozzles examined with their C D ranging from 0.62 to 0.69. Penetration of the twin-hole nozzles was found to lag the single-hole nozzle, even before the sprays merged. Finally, switching in hole dominance was observed from one twin-hole nozzle, and this was accompanied by greater instability in mass flow during the transient opening phase of the injector.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Heavy Quark Production at an Electron-Ion Collider

An Electron-Ion Collider (EIC) with center-of-mass energies sqrt(s_eN) ~ 20-100 GeV and luminosity L ~ 10 34 cm -2 s -1 would offer new opportunities to study heavy quark production in high-energy electron or photon scattering on protons and nuclei. We report about an R&D project exploring the feasibility of direct measurements of nuclear gluon densities at large x (gluonic EMC effect, antishadowing) using open charm production at EIC. We describe the charm production rates and angle-momentum distributions at large x and discuss methods of charm identification using next-generation detector capabilities (pi/K identification, vertex reconstruction). The results can be used also for other physics applications of heavy quark production at EIC (fragmentation functions, jets, heavy quark propagation in nuclei).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Quasi-Optimal Elimination Trees for 2D Grids with Singularities

We construct quasi-optimal elimination trees for 2D finite element meshes with singularities. These trees minimize the complexity of the solution of the discrete system. The computational cost estimates of the elimination process model the execution of the multifrontal algorithms in serial and in parallel shared-memory executions. Since the meshes considered are a subspace of all possible mesh partitions, we call these minimizers quasi-optimal. We minimize the cost functionals using dynamic programming. Finding these minimizers is more computationally expensive than solving the original algebraic system. Nevertheless, from the insights provided by the analysis of the dynamic programming minima, we propose a heuristic construction of the elimination trees that has cost O N e log ⁡ N e , where N e is the number of elements in the mesh. We show that this heuristic ordering has similar computational cost to the quasi-optimal elimination trees found with dynamic programming and outperforms state-of-the-art alternatives in our numerical experiments.

Paszyńska, A.↗