Search NASA⌕ Search

Engineering topics

Nguyen, Quang

Publications and source records attributed to Nguyen, Quang.

Photonuclear transmutation doping in gallium-based semiconductor materials

The present invention relates to various high quality n-type and p-type doped gallium-based semiconductor materials, electronic components incorporating these materials, and processes of producing these materials. In particular, The present invention relates processes to achieve high quality, uniform doping of a whole wafer or a thin layer of gallium-based semiconductor materials for various applications such as a vertical power transistor or diode.

Kwon, Jae Wan↗

Evaluation of Agricultural Equipment Manufacturing for a Bio-Based Economy

This report provides the analysis results of agricultural and preprocessing equipment and manufacturing requirements to support the mobilization of the Billion Ton projections utilizing the conventional supply chain logistics. This report discusses the number of required agricultural machinery and their market values, the drivers and barriers of the transition in agricultural equipment, the potential economic impacts to the US associated with expansion of these equipment manufacturing and the factors that impact the transition in agricultural machinery to support the growth of a large-scale biofuel and bio-products industry in short and long terms. Short and long terms refer to the early development and mature development phases of the cellulosic biofuels industry in the United States.

09 BIOMASS FUELS↗

Key factors in designing a robust biorefinery feedstock preprocessing system

One essential prerequisite for achieving design throughput and product conversion yield of cellulosic biofuel in commercial operation is a robust biomass feedstock preprocessing system. Such a system will reliably and steadily supply consistent quality feedstock to the conversion reactor. Pioneer cellulosic biofuel plants have encountered many feedstock handling challenges which lead to lengthy startup and difficulties in meeting plant nameplate production rate. Most of the biomass material handling challenges are caused by: (1) variability in biomass properties especially for herbaceous materials such as corn stover, (2) inadequate integrated testing of equipment, (3) not using the appropriate equipment or equipment design for the job, (4) mismatching of equipment capacity and turn down ratio, (5) lack of integrated control for the whole feedstock preprocessing system, and (6) inadequate surge capacity. This presentation will discuss the feedstock preprocessing challenges, identify key areas from equipment design and operation to process integration requiring optimization or further development to achieve robust integrated biomass feedstock preprocessing systems.

09 BIOMASS FUELS↗

Nanocomposite thermite powders with improved flowability prepared by mechanical milling

Nanocomposite thermite powders can be used in reactive parts and components. Manufacturing these components requires tailoring powder particle size distributions, particle shapes, and powder flowability. Specifically, an improved flowability is desired to use such powders as feedstock in additive manufacturing. Arrested reactive milling (ARM) offers a versatile and practical approach for preparing nanocomposite thermites with fully dense particles, which will retain their structures and mixedness between reactive components while being stored, handled, and processed. However, ARM products usually have broad particle size distributions, rock-like particle shapes, and poor flowability. Here in this study, ARM is modified to include a low-energy milling step to tune the shapes and flowability of the prepared powders. Experiments are performed with aluminum-rich Al·Fe 2 O 3 thermites. After the initial nanocomposite thermite is prepared in a planetary mill, it is additionally milled at a reduced rotation rate, replacing milling balls with smaller glass beads, and adding different liquid process control agents. Powders with modified particle shapes and size distributions are obtained, which have substantially improved flowability compared to the initial material. The reactivity of the initial and modified powders is evaluated using their ignition on a heated wire, by electro-static discharge, by thermal analysis (DSC) and in constant volume explosion tests. Finally, the reactivity of the modified powders is not diminished; instead, an improved reactivity is observed for selected samples.

36 MATERIALS SCIENCE↗

Lunar Reconnaissance Orbiter (LRO) Command and Data Handling Flight Electronics Subsystem

A document describes a high-performance, modular, and state-of-the-art Command and Data Handling (C&DH) system developed for use on the Lunar Reconnaissance Orbiter (LRO) mission. This system implements a complete hardware C&DH subsystem in a single chassis enclosure that includes a processor card, 48 Gbytes of solid-state recorder memory, data buses including MIL-STD-1553B, custom RS-422, SpaceWire, analog collection, switched power services, and interfaces to the Ka-Band and S-Band RF communications systems. The C&DH team capitalized on extensive experience with hardware and software with PCI bus design, SpaceWire networking, Actel FPGA design, digital flight design techniques, and the use of VxWorks for the real-time operating system. The resulting hardware architecture was implemented to meet the LRO mission requirements. The C&DH comprises an enclosure, a backplane, a low-voltage power converter, a single-board computer, a communications interface board, four data storage boards, a housekeeping and digital input/output board, and an analog data acquisition board. The interfaces between the C&DH and the instruments and avionics are connected through a SpaceWire network, a MIL-STD-1553 bus, and a combination of synchronous and asynchronous serial data transfers over RS-422 and LVDS (low-voltage differential-signaling) electrical interfaces. The C&DH acts as the spacecraft data system with an instrument data manager providing all software and internal bus scheduling, ingestion of science data, distribution of commands, and performing science operations in real time.

Nguyen, Quang↗

Final Technical Report DOE/GO/13142-1

This research adds to the understanding of the areas of residual starch and biomass conversion to alcohol, by providing data from pilot plant equipment of larger scale than the minimum required to give commercially scalable data. Instrumentation and control is in place to capture the information produced, for economic and technical evaluation. The impact of rheology, recycle streams, and residence time distributions on the technical and economic performance can be assessed. Various processes can be compared technically and economically because the pilot plants are readily modifiable. Several technologies for residual starch yield improvement have been identified, implemented, and patent applications filed. Various biomass-to-ethanol processes have been compared and one selected for technical optimization and commercialization. The technical and economic feasibility of the current simplified biomass conversion process is being confirmed by intensive pilot plant efforts as of this writing. Optimization of the feedstock handling and pretreatment is occurring to increase the alcohol yield above the minimum commercially viable level already demonstrated. Samples of biomass residue and reactor blowdown condensate are being collected to determine the technical and economic performance of the high-water-recycle waste treatment system being considered for the process. The project is of benefit to the public because it is advancing the efforts to achieve low-cost fermentable substrates for conversion to transportation fuels. This process combines the hydrolysis of agricultural residues with novel enzymes and organisms to convert the sugars released to transportation fuels. The process development is taking place at a scale allowing commercial development to proceed at a rapid pace.

09 BIOMASS FUELS↗