Engineering topics
Nguyen, SonBinh T.
Publications and source records attributed to Nguyen, SonBinh T..
Template-Assisted, Seed-Mediated Synthesis of Hierarchically Mesoporous Core–Shell UiO-66: Enhancing Adsorption Capacity and Catalytic Activity through Iterative Growth
A hierarchically mesoporous (HM) UiO-66-F 4 shell with ~8 nm mesopores can be iteratively grown on top of UiO-66 nanoparticle (NP) seeds over several cycles templated by Pluronic F-127 micelles. Presumably, the Pluronic micelles that were formed in water can surround UiO-66 NPs to facilitate the overgrowth of an HM-UiO-66-F 4 shell in the presence of Zr IV precursors and BDC-F 4 linkers. The UiO-66 NP seeds play an important role in directing the continuous growth of the HM-UiO-66-F 4 shell, as only a nonporous phase was obtained in their absence. Furthermore, this template-assisted, seed-mediated method can be extended to produce other UiO-66-X (X = (OH) 2 , (COOH) 2 , etc.) shells, demonstrating its generality for the UiO-66 family of metal–organic frameworks. Notably, the incorporation of mesopores into the thrice-overgrown UiO-66@HM|3rd-UiO-66-F 4 materials leads to impressive enhancements in the per-mass uptake capacity of Direct Blue 86, a large anionic dye: 320% better than the parent UiO-66 seeds and 150% better than that for a [UiO-66 + UiO-66-F 4 ] physical mixture at the same mass proportion. Similar enhancements were also observed in the catalyzed oxidation of thioanisole.
Atomically Thin Polymer Layer Enhances Toughness of Graphene Oxide Monolayers
During the last decade, two-dimensional (2D)materials have emerged as versatile building blocks for the next generation of engineered materials. However, the intrinsically brittle behavior of 2D materials has thus far delayed their adoption in applications such as sensors and structural materials. Herein, we demonstrate a strategy for toughening graphene oxide (GO) through synergistic interfacial interactions between GO monolayers and ultrathin layers of strongly interacting poly(vinyl alcohol) (PVA). By creating GO-PVA and PVA-GO-PVA nanolaminates, we demonstrate a 2-fold increase in GO toughness, which translates into dramatic increases in energy dissipation and piercing resistance. Atomistic simulations show that this remarkable behavior arises from a polymer chain crack-bridging mechanism, resulting froma synergistic combination of interdomain reinforcements across the GO monolayer and extensive GO-polymer interfacial hydrogen-bonding interactions. Here, the reported findings highlight the potential for achieving engineered 2D materials with superior mechanical properties by incorporating deformation and failure-resistant mechanics arising from tailored chemical interactions between constituents.
Elucidating the mechanism of the UiO-66-catalyzed sulfide oxidation: activity and selectivity enhancements through changes in the node coordination environment and solvent
Benzoic acid modulators that “cap” the Zr 6 -oxo-hydroxo cluster nodes in UiO-66 metal–organic frameworks can be removed to increase the number of “open” sites ( i.e. , those that are terminated with [μ 1 -OH + μ 1 -OH 2 ]) up to 5 per node, enabling the “decapped” materials to exhibit enhanced catalytic activity in the oxidation of methyl phenyl sulfide. Here, computational modeling reveals that the labile Zr-μ 1 -OH groups on these open sites are likely converted into Zr-μ 1 -OOH species that are active in oxidizing the sulfide as well as its sulfoxide product. In solvents such as CH 3 CN and CH 2 Cl 2 , the sulfoxide product can additionally replace the aquo ligands of the Zr-μ 1 -OH 2 moieties to increase the concentration of the sulfoxide adjacent to the active Zr-μ 1 -OOH species, resulting in overoxidation to the sulfone. However, the use of CH 3 OH, a solvent that can compete with the sulfoxide and suppress this binding mode, can retard the overoxidation and lead to higher selectivities for the sulfoxide product.
Highly Stable, Ultrasmall Polymer-Grafted Nanobins (usPGNs) with Stimuli-Responsive Capability
In this work, highly stable and stimuli/pH-responsive ultrasmall polymer-grafted nanobins (usPGNs) have been developed by grafting a small amount (10 mol %) of short (4.3 kDa) cholesterol-terminated poly(acrylic acid) (Chol-PAA) into an ultrasmall unilamellar vesicle (uSUV). The usPGNs are stable against fusion and aggregation over several weeks, exhibiting over 10-fold enhanced cargo retention in biologically relevant media at pH 7.4 in comparison with the parent uSUV template. Coarse-grained molecular dynamics (CGMD) simulations confirm that the presence of the cholesterol moiety can greatly stabilize the lipid bilayer. They also show extended PAA chain conformations that can be interpreted as causing repulsion between colloidal particles, thus stabilizing them against fusion. Notably, CGMD predicted a clustering of the Chol-PAA chains on the lipid bilayer under acidic conditions due to intra- and interchain hydrogen bonding, leading to the destabilization of local membrane areas. This explains the experimental observation that usPGNs can be triggered to release a significant amount of cargo upon acidification to pH 5. These developments put the lipid-bilayer-embedded Chol-PAA in stark contrast with traditional poly(acrylic acid) systems where the molar mass (M n ) of the polymer chains must exceed 16.5 kDa to achieve stimuli-responsive changes in conformation. They also distinguish the small usPGNs from the much-larger polymer-caged nanobin platform where the Chol-PAA chains must be covalently cross-linked to engender stimuli-responsive behaviors.
Rendering High Surface Area, Mesoporous Metal–Organic Frameworks Electronically Conductive
Not provided.
Supported Aluminum Catalysts for Olefin Hydrogenation
Three-coordinate alkylaluminum sites were developed on a catechol-containing porous organic polymer support (CatPOP A2B1). The CatPOP-based alkylaluminum sites were characterized by solid-state attenuated total reflectance IR spectroscopy, 1H and 27Al magic-angle-spinning NMR spectroscopy, pair-distribution function X-ray absorption spectroscopy, and elemental analysis. The low-coordinate organoaluminum sites can hydrogenate and isomerize a range of mono- and disubstituted alkenes and alkynes under mild conditions (75–100 °C, 5–14 bar H2, 20 h). Results of experimental and computational mechanistic investigations suggest a heterolytic mechanism for the observed hydrogenation–isomerization activity.
The Significance of Multivalent Bonding Motifs and “Bond Order” in DNA-Directed Nanoparticle Crystallization
Multivalent oligonucleotide-based bonding elements have been synthesized and studied for the assembly and crystallization of gold nanoparticles. Through the use of organic branching points, divalent and trivalent DNA linkers were readily incorporated into the oligonucleotide shells that define DNA-nanoparticles and compared to monovalent linker systems. These multivalent bonding motifs enable the change of "bond strength" between particles and therefore modulate the effective "bond order." In addition, the improved accessibility of strands between neighboring particles, either due to multivalency or modifications to increase strand flexibility, gives rise to superlattices with less strain in the crystallites compared to traditional designs. Furthermore, the increased availability and number of binding modes also provide a new variable that allows previously unobserved crystal structures to be synthesized, as evidenced by the formation of a thorium phosphide superlattice.
Gas-Phase Dimerization of Ethylene under Mild Conditions Catalyzed by MOF Materials Containing (bpy)Ni II Complexes
NU-1000-(bpy)Ni II , a highly porous MOF material possessing well-defined (bpy)Ni II moieties, was prepared through solvent-assisted ligand incorporation (SALI). Treatment with Et 2 AlCl affords a single-site catalyst with excellent catalytic activity for ethylene dimerization (intrinsic activity for butenes that is up to an order of magnitude higher than the corresponding (bpy)NiCl 2 homogeneous analogue) and stability (can be reused at least three times). The high porosity of this catalyst results in outstanding levels of activity at ambient temperature in gas-phase ethylene dimerization reactions, both under batch and continuous flow conditions.
Enhancing DNA-Mediated Assemblies of Supramolecular Cage Dimers through Tuning Core Flexibility and DNA Length—A Combined Experimental–Modeling Study
We report two complementary small-molecule–DNA hybrid (SMDH) building blocks have been combined to form well-defined supramolecular cage dimers at DNA concentrations as high as 102 μM. This was made possible by combining a flexible small-molecule core and three DNA arms of moderate lengths (<20 base pairs). These results were successfully modeled by coarse-grained molecular dynamics simulations, which also revealed that the formation of illdefined networks in the case of longer DNA arms can be significantly biased by the presence of deep kinetic traps. Notably, melting point studies revealed that cooperative melting behavior can be used as a means to distinguish the relative propensities for dimer versus network formation from complementary flexible three-DNA-arm SMDH (fSMDH 3 ) components: sharp, enhanced melting transitions were observed for assemblies that result mostly in cage dimers, while no cooperative melting behavior was observed for assemblies that form ill-defined networks.
Entropy-Driven Crystallization Behavior in DNA-Mediated Nanoparticle Assembly
Abstract not provided
Synthesis and Catalytic Hydrogenation Reactivity of a Chromium Catecholate Porous Organic Polymer
A single-site chromium catecholate POP (catPOP A(2)B(1)) was synthesized and characterized via AT-IR, XAS, and EPR spectroscopy. The well-defined, four-coordinate, 11-electron Cr(III) centers bound to catecholate POP were demonstrated to be active hydrogenation catalysts for nonpolar unsaturated organic substrates under mild conditions (5 mol % of Cr, 200 psi of H-2, 60 degrees C). This material constitutes the first example of a well-defined, supported organometallic chromium hydrogenation precatalyst.
Key Factors Limiting Carbon Nanotube Yarn Strength: Exploring Processing-Structure-Property Relationships
Abstract not provided
Intramolecular ring-opening from a CO 2 -derived nucleophile as the origin of selectivity for 5-substituted oxazolidinone from the (salen)Cr-catalyzed [aziridine + CO 2 ] coupling
The (salen)Cr-catalyzed [aziridine + CO 2 ] coupling to form oxazolidinone was found to exhibit excellent selectivity for the 5-substituted oxazolidinone product in the absence of any cocatalyst. Quantum mechanical calculations suggest that the preferential opening of the substituted C–N bond of the aziridine over the unsubstituted C–N bond is a key factor for this selectivity, a result that is supported by experiment with several phenyl-substituted aziridines. In the presence of external nucleophile such as dimethyl aminopyridine (DMAP), the reaction changes pathway and the ring-opening process is regulated by the steric demand of the nucleophile.
New Carbon-Based Porous Materials with Increased Heats of Adsorption for Hydrogen Storage
Hydrogen fuel cell vehicles are a promising alternative to internal combustion engines that burn gasoline. A significant challenge in developing fuel cell vehicles is to store enough hydrogen on-board to allow the same driving range as current vehicles. One option for storing hydrogen on vehicles is to use tanks filled with porous materials that act as “sponges” to take up large quantities of hydrogen without the need for extremely high pressures. The materials must meet many requirements to make this possible. This project aimed to develop two related classes of porous materials to meet these requirements. All materials were synthesized from molecular constituents in a building-block approach, which allows for the creation of an incredibly wide variety of materials in a tailorable fashion. The materials have extremely high surface areas, to provide many locations for hydrogen to adsorb. In addition, they were designed to contain cations that create large electric fields to bind hydrogen strongly but not too strongly. Molecular modeling played a key role as a guide to experiment throughout the project. A major accomplishment of the project was the development of a material with record hydrogen uptake at cryogenic temperatures. Although the ultimate goal was materials that adsorb large quantities of hydrogen at room temperature, this achievement at cryogenic temperatures is an important step in the right direction. In addition, there is significant interest in applications at these temperatures. The hydrogen uptake, measured independently at NREL was 8.0 wt %. This is, to the best of our knowledge, the highest validated excess hydrogen uptake reported to date at 77 K. This material was originally sketched on paper based on a hypothesis that extended framework struts would yield materials with excellent hydrogen storage properties. However, before starting the synthesis, we used molecular modeling to assess the performance of the material for hydrogen uptake. Only after modeling suggested record-breaking hydrogen uptake at 77 K did we proceed to synthesize, characterize, and test the material, ultimately yielding experimental results that agreed closely with predictions that were made before the material was synthesized. We also synthesized, characterized, and computationally simulated the behavior of two new materials displaying the highest experimental Brunauer$-$Emmett$-$Teller (BET) surface areas of any porous materials reported to date (~7000 m 2 /g). Key to evacuating the initially solvent-filled materials without pore collapse, and thereby accessing the ultrahigh areas, was the use of a supercritical CO 2 activation technique developed by our team. In our efforts to increase the hydrogen binding energy, we developed the first examples of “zwitterionic” metal-organic frameworks (MOFs). The two structures feature zwitterionic characteristics arising from N-heterocyclic azolium groups in the linkers and negatively charged Zn 2 (CO 2 ) 5 nodes. These groups interact strongly with the H 2 quadrupole. High initial isosteric heats of adsorption for hydrogen were measured at low H 2 loading. Simulations were used to determine the H 2 binding sites, and results were compared with inelastic neutron scattering. In addition to MOFs, the project produced a variety of related materials known as porous organic frameworks (POFs), including robust catechol-functionalized POFs with tunable porosities and degrees of functionalization. Post-synthesis metalation was readily carried out with a wide range of metal precursors (Cu II , Mg II , and Mn II salts and complexes), resulting in metalated POFs with enhanced heats of hydrogen adsorption compared to the starting nonmetalated materials. Isosteric heats of adsorption as high as 9.6 kJ/mol were observed, compared to typical values around 5 kJ/mol in unfunctionalized MOFs and POFs. Modeling played an important role throughout the project. For example, we used molecular simulations to determine that the optimal isosteric heat of adsorption (Q st ) for maximum hydrogen delivery using MOFs is approximately 20 kJ/mol. If the heat of adsorption is too low, little hydrogen is adsorbed. If the heat of adsorption is too high, it is difficult to recover the hydrogen at the desorption pressure. The results supported the major premise of this project that increasing Q st for MOFs with large surface areas is required to attain current hydrogen storage targets in terms of deliverable capacity.
Importance of the DNA “bond” in programmable nanoparticle crystallization
If a solution of DNA-coated nanoparticles is allowed to crystallize, the thermodynamic structure can be predicted by a set of structural design rules analogous to Pauling's rules for ionic crystallization. The details of the crystallization process, however, have proved more difficult to characterize as they depend on a complex interplay of many factors. Here, we report that this crystallization process is dictated by the individual DNA bonds and that the effect of changing structural or environmental conditions can be understood by considering the effect of these parameters on free oligonucleotides. Specifically, we observed the reorganization of nanoparticle superlattices using time-resolved synchrotron small-angle X-ray scattering in systems with different DNA sequences, salt concentrations, and densities of DNA linkers on the surface of the nanoparticles. The agreement between bulk crystallization and the behavior of free oligonucleotides may bear important consequences for constructing novel classes of crystals and incorporating new interparticle bonds in a rational manner.