Engineering topics

Nickum, J. D.

Publications and source records attributed to Nickum, J. D..

8 records

NASA NTRS1983

Enhanced character sizes for the VDM-1 video display board

Use of a microprocessor for providing navigation information from the inherent hyperbolic geometries of Loran-C was discussed. The advantages Loran-C offers over VOR/DME as a primary navigation aid are identified. These advantages include long range coverage by several stations, coverage at low altitudes, and the capability to have nonprecision approaches at airports not already served by landing aids. Modern digital electronic technology is used to produce a device to convert Loran-C data to useful pilot information using simple software algorithms and low cost microprocessor devices. The cost and lack of availability of suitable processors to execute these algorithms have prevented a Loran-C navigator from being developed. Results indicate that the microprocessor based Loran-C navigator has an accuracy of 1.0 nm or less over an area typically covered by a triad of Loran-C stations and can execute a position update in less than 0.2 seconds.

Novacki, S. M., III↗

NASA NTRS1983

Weather data communication and utilization

The communication of weather data to aircraft is discussed. Problems encountered because of the great quantities of data available and the limited capacity to transfer this via radio link to an aircraft are discussed. Display devices are discussed.

Mcfarland, R. H.↗

NASA NTRS1982

Enhanced character sizes for the VDM-1 video display board

A display enhancement implemented on the new VDM-1 video display board installed in a LORAN-C navigation receiver is addressed. Increased character size for easier viewing of the 3.75 inch diagonal CRT display is provided.

Novacki, S. M., III↗

NASA NTRS1982

Cockpit weather radar display demonstrator and ground-to-air sferics telemetry system

The results of two methods of obtaining timely and accurate severe weather presentations in the cockpit are detailed. The first method described is a course up display of uplinked weather radar data. This involves the construction of a demonstrator that will show the feasibility of producing a course up display in the cockpit of the NASA simulator at Langley. A set of software algorithms was designed that could easily be implemented, along with data tapes generated to provide the cockpit simulation. The second method described involves the uplinking of sferic data from a ground based 3M-Ryan Stormscope. The technique involves transfer of the data on the CRT of the Stormscope to a remote CRT. This sferic uplink and display could also be included in an implementation on the NASA cockpit simulator, allowing evaluation of pilot responses based on real Stormscope data.

Nickum, J. D.↗

NASA NTRS1978

Initial flight test of a Loran-C receiver/data collection system

Development of a low cost Loran C receiver for general aviation use is discussed. The preparation and procedure of a flight test conducted with a receiver design which utilizes a phase locked loop oscillator to track the Loran C signals is described. It is indicated that such a receiver is a viable alternative for future work in developing a low cost Loran-C navigator.

Fischer, J. P.↗

NASA NTRS1978

Loran-C flight test software

The software package developed for the KIM-1 Micro-System and the Mini-L PLL receiver to simplify taking flight test data is described along with the address and data bus buffers used in the KIM-1 Micro-system. The interface hardware and timing are also presented to describe completely the software programs.

Nickum, J. D.↗

NASA NTRS1978

Stand-alone development system using a KIM-1 microcomputer module

A small microprocessor-based system designed to: contain all or most of the interface hardware, designed to be easy to access and modify the hardware, to be capable of being strapped to the seat of a small general aviation aircraft, and to be independent of the aircraft power system is described. The system is used to develop a low cost Loran C sensor processor, but is designed such that the Loran interface boards may be removed and other hardware interfaces inserted into the same connectors. This flexibility is achieved through memory-mapping techniques into the microprocessor.

Nickum, J. D.↗

NASA NTRS1977

Loran-C digital word generator for use with a KIM-1 microprocessor system

The problem of translating the time of occurrence of received Loran-C pulses into a time, referenced to a particular period of occurrence is addressed and applied to the design of a digital word generator for a Loran-C sensor processor package. The digital information from this word generator is processed in a KIM-1 microprocessor system which is based on the MOS 6502 CPU. This final system will consist of a complete time difference sensor processor for determining position information using Loran-C charts. The system consists of the KIM-1 microprocessor module, a 4K RAM memory board, a user interface, and the Loran-C word generator.

Nickum, J. D.↗