Search NASA⌕ Search

Engineering topics

Niedziela, Jennifer

Publications and source records attributed to Niedziela, Jennifer.

10 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Thermally Induced Structural Transitions in Epoxy Thermoset Polymer Networks and Their Spectroscopic Responses

The polymer network structure of epoxy thermosets plays a significant role in its final material properties. However, the effects of mild thermal exposure on these network structures are poorly studied. In this work, wide-angle X-ray scattering was used to investigate the polymer network structure of two epoxy thermosets: homopolymerized bisphenol A (BPA) epoxy resin and BPA epoxy resin cured with a polyether amine hardener (BPA/T-403). Using density functional theory and wide-angle X-ray scattering, insights into the polymer network structure were obtained. Diffraction features were determined to originate from hardener-to-hardener molecular distance, perpendicular π–π stacking of aromatic p-phenylene rings, and the average carbon–carbon distance in the polymer. Thermal exposure was found to permanently alter these structural features for both thermosets, with an increase in the π–π stacking distance. Homopolymerized BPA had an additional decrease in the hardener-to-hardener distance. These structural alterations were found to be detectable using Fourier transform infrared spectroscopy and Raman spectroscopy, with changes in the hardener-to-hardener distance having the largest variations in the resulting spectra specifically at the aromatic and ether frequencies.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Inelastic neutron spectra of polyacrylonitrile-based carbon fibers

We present the vibrational spectra of polyacrylonitrile-based carbon fibers collected using inelastic neutron scattering. We ascertain the behavior of a broad range of vibrational spectra that are optically silent, and demonstrate a direct connection between these modes and thermomechanical properties of the fibers. We show directionally dependent coupling of hydrogen in the carbon fiber matrix, which is directly linked to mechanical properties. Further, we show hydrogen preferentially couples to the midband of the vibrational spectrum, and that there are higher overall mode populations in the traditional Raman D–G intervalley region, suggesting involvement of these modes in tensile strength reduction and transport properties.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Computational investigations of Dienes defect- and vacancy-induced changes in the electronic and vibrational properties of carbon fiber structural units

Carbon fiber (CF) is a promising lightweight alternative to steel and is of significant interest for energy applications. As CF continues to find new uses and is exposed to new external conditions, a noninvasive method of monitoring its structural integrity is critical. Raman spectroscopy is a commonly used method for this monitoring; however, it is highly inferential, and the interpretation of the data is not always straightforward. In this work, we perform density functional theory (DFT) calculations to investigate changes in the vibrational properties of CF structural units (i.e., graphene and graphite) caused by monovacancy and Dienes defects as a foundation for modeling more complex defects that move our model toward that of realistic CF. Using large computational supercells, we can understand how these defects change the electronic structure and vibrational properties of graphene and graphite for interdefect distances near those of the lower experimental limit. The monovacancy opens an electronic bandgap at the K point. Although no such electronic gap is opened by the Dienes defect, both defects introduce flat defect bands near the Fermi energy. The Dienes defect creates long-range deviations of the phonons, leading to substantial broadening of the highest frequency optical modes in the band structure compared to that of the pristine material. In contrast, the phonon changes caused by the monovacancy are short range, and only minor changes in the band structure or phonon density of states were observed. These findings can assist in the interpretation of experimental results by providing atomic-scale insight into key electronic and vibrational features.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Inelastic Neutron Spectra of Uranium Tetrafluoride Hydrate, UF 4 (H 2 O) 2.5

Uranium tetrafluoride hydrate (UFH) is formed by immersing anhydrous UF4 under water for 12 h. UFH is therefore clearly a chemical species of environmental concern, as anhydrous UF4 is an intermediate uranium form in the nuclear fuel cycle. We use inelastic neutron scattering (INS) to probe the full vibrational spectra of UFH and its deuterated analogue in an effort to improve the fundamental understanding of its vibrational spectra. Coupled with density functional theory (DFT) calculations, the first for this compound, and full spectral modeling, we generate the complete vibrational spectra of UFH and compare them to prior optical spectroscopic results. In particular, the combination of DFT with INS allows us to identify multiple distinct chemical environments in the water bending and OH stretching regions. Whereas the water molecules directly bound to the U atoms execute OH stretching around 3600 cm –1 , a second class of H-bonded waters vibrate below 3000 cm –1 , an indicator of strong H bonding. In addition, a class of librational water modes are observed between 400 and 900 cm–1, which themselves can be separated in energy according to their chemical environments. Furthermore, measurements presented herein directly assist in the assignment of certain spectral features in the infrared spectrum and will inform future investigations of UFH for environmental or forensics purposes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Measurement of the Generalized Spin Polarizabilities of the Neutron in the Low-Q{sup 2} Region

Understanding the nucleon spin structure in the regime where the strong interaction becomes truly strong poses a challenge to both experiment and theory. At energy scales below the nucleon mass of about 1 GeV, the intense interaction among the quarks and gluons inside the nucleon makes them highly correlated. Their coherent behaviour causes the emergence of effective degrees of freedom, requiring the application of non-perturbative techniques such as chiral effective field theory1. Here we present measurements of the neutron’s generalized spin polarizabilities that quantify the neutron’s spin precession under electromagnetic fields at very low energy-momentum transfer squared down to 0.035 GeV2. In this regime, chiral effective field theory calculations2–4 are expected to be applicable. Our data, however, show a strong discrepancy with these predictions, presenting a challenge to the current description of the neutron’s spin properties.

Sulkosky, Vincent↗
DOE OSTI2019

MECHANICAL CLASSIFICATION OF CARBON FIBERS FROM RAMAN AND X-RAY SCATTERING

Carbon fibers for application are produced from a wide variety of precursor phases and exhibit a broad range of mechanical characteristics that result from variations in the manufacturing process [1]. Raman spectroscopy, a nondestructive and potentially high-throughput tool, is highly sensitive to a host of phenomena in carbon-based materials [2]. Carbon fibers used in applications are naturally delineated along lines of macroscopic strength properties, and control of the macroscopic strength properties is well understood to be linked to the manufacturing process and ultimate firing temperature of the carbon fibers. Consequently, there are numerous characterizations of spectroscopic observables connected to macroscopic properties of carbon fibers, particularly to optimize production by attempting to quantify signatory changes in fibers [3]. Here we are specifically concerned with the evolution of spectroscopic data collected from carbon fibers as they connect to bulk mechanical properties as a baseline for studying spectral evolution under temperature and strain application. To this end, we present correlative results of experimental studies investigating the ability to connect the macroscopic properties of carbon fibers with microscopic observables across a broad range of macroscopic values.

Niedziela, Jennifer↗
DOE OSTI2018

Characterizing the Chemical Behavior of Uranium Compounds for Nuclear Forensics

Better characterization of uranium compounds related to the nuclear fuel cycle is a key goal of the nuclear forensics community. Understanding the chemical behavior of these compounds in various environmental conditions and the effect on observable properties is crucial to the identification of unknown materials. Uranyl fluoride, the hydrolysis product of uranium hexafluoride, is a material of particular interest. Previous studies have suggested that uranyl fluoride may degrade upon exposure to high humidity, but the chemical pathway of degradation was previously not well understood. Our work demonstrates that uranyl fluoride undergoes a chemical reaction with water vapor to form uranyl hydroxide and peroxide species. This understanding will help guide forensic analysis in the future.

Kirkegaard, Marie↗
DOE OSTI2016

Complex optimization for big computational and experimental neutron datasets

Here, we present a framework to use high performance computing to determine accurate solutions to the inverse optimization problem of big experimental data against computational models. We demonstrate how image processing, mathematical regularization, and hierarchical modeling can be used to solve complex optimization problems on big data. We also demonstrate how both model and data information can be used to further increase solution accuracy of optimization by providing confidence regions for the processing and regularization algorithms. Finally, we use the framework in conjunction with the software package SIMPHONIES to analyze results from neutron scattering experiments on silicon single crystals, and refine first principles calculations to better describe the experimental data.

36 MATERIALS SCIENCE↗