Search NASA⌕ Search

Engineering topics

Niedziela, Jennifer L.

Publications and source records attributed to Niedziela, Jennifer L..

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Strain-Induced Shifts in Defective Graphite Phonon Modes Predicted by Density Functional Theory

Carbon fiber composites have gained attention as a structural material because of their high strength-to-weight ratio, and understanding the effect of defects on reactivity and mechanical properties is important for the longevity and safety of the composite. Although it is known that strain causes the underlying graphitic vibrational modes to redshift, it is not clear how strain may alter reactivity and defect-induced vibrational changes. To investigate the strain-induced phonon changes of defective carbon fiber composites, density functional theory calculations of graphite are used, including intercalated hydrogen and fluorine defects. By comparing changes in the bond lengths, formation energies, and phonon density of states for uniaxially and biaxially strained graphite, strain was found to generally make defect formation more favorable and the specific behavior changes are dependent on the strain direction and defect identity. Specifically, intercalated fluorine phonons are more sensitive to strain than hydrogen intercalation phonons, and strain applied along the zigzag direction alters the calculated properties more than strain along the armchair direction. Finally, these results highlight the importance of understanding the microstructural effect of deviations from the ideal material because small changes in strain or defect type can significantly alter the behavior of the carbon fiber composite core.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Comment on ‘Resonant inelastic x-ray scattering from U 3 O 8 and UN’

In a recent manuscript, Lawrence Bright et al (2023 J. Phys.: Condens. Matter 35 175501) reported the resonant inelastic x-ray scattering spectra of U 3 O 8 , as well as UN. Their goal was to identify electronic multiplets associated with a 5f 1 configuration with ground state 2 F 5/2 . Complete active space self-consistent field with spin–orbit coupling (CASSCF-SOC) predicted that 2 F 5/2 transitions should be observable at 190 and 328 meV. However, these energies were not accessible in their experiment. Here they suggested that the recent inelastic neutron scattering results of Miskowiec et al (2021 Phys. Rev. B 103 205101) could have been sensitive to these transitions. Here we show that transitions of this possible origin appear in that dataset near 198, 262, 362, and potentially 448 meV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Product-specific kinetics reveal effect of epoxy crystallization on thermoset thermal degradation

Crystallization is a common problem for epoxy resins, which are ubiquitous in industrial and commercial use. Integration of crystallized epoxy monomers into cured thermosets has been shown to alter the thermosets’ final mechanical properties. However, no studies have investigated the impact of these crystals on the thermal stability of the thermoset. Here we investigate the degradation kinetics of a bisphenol F–based epoxy thermoset with and without crystallized monomers using Product-Specific Kinetic (PSK) analysis coupled with Evolved Gas Analysis-Mass Spectrometry (EGA-MS). PSK analysis revealed significant differences in evolved product ion kinetics, suggesting changes in the degradation kinetics between thermoset configurations. Further, it was concluded that early stages of degradation are influenced most by crystal presence due to the high concentration of unreacted epoxy monomers and lower cross-linking density of the cured network. After post-cure annealing, significant changes are observed in the degradation kinetics of thermosets without crystal inclusions. Conversely, post-cure annealing procedures of crystal integrated thermosets showed little change in the thermoset degradation kinetics across all conversion extents. These findings suggest that post-cure annealing of thermosets with crystals present at the onset does not alter the cross-linking density of the polymer network enough to significantly change the degradation kinetics. We hypothesize this is because the excess monomers from the melted crystals are unable to find suitable reaction sites for complete binding into the polymer network, which has direct implications for the material properties and final thermal stability of the thermoset.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Pressure modulated charge transfer and phonon interactions drive phase transitions in uranium–aluminum laves phases

Lanthanide AB 2 intermetallic compounds known as Laves phases have itinerant 3d and localized 4f electrons, which lead to interesting physical properties such as magnetic anisotropy and high Curie temperatures. Actinide Laves phases can display physical properties that are similarly intriguing. However, at reduced A–A spacing the C14 and C15 polytypes may exhibit larger wavefunction overlap for their 5f electron states and distinct characteristics for phases with more delocalized chemical bonding. The C36 polytype, on the other hand, is extraordinarily rare (<5% of known Laves phases). UAl 2 is the only known actinide Laves phase to show a pressure-controllable C15 → C36 transition. Here, we apply first principles calculations to determine the origin of the C15 → C36 phase transition and reveal the differences between the corresponding properties of each phase. Pressure increases lead to bond compression–induced electron transfer from Al to U, which drives dynamic instability in the C15 phonon modes because of the uniform U–U bonding environment. Further, the opposite phenomena is observed in C36: varied U–U bonding environments are vibronically more stable after charge transfer. We find that the interplay between charge transfer, chemical bonding, and phononic stability are central to predicting phase transitions and corresponding changes in physical properties for both C15 and C36 UAl 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2023

Nonthermal Bonding Origin of a Novel Photoexcited Lattice Instability in SnSe

Lattice dynamics measurements are often crucial tools for understanding how materials transform between different structures. Here, we report time-resolved x-ray scattering-based measurements of the nonequilibrium lattice dynamics in SnSe, a monochalcogenide reported to host a novel photoinduced lattice instability. By fitting interatomic force models to the fluence dependent excited-state dispersion, we determine the nonthermal origin of the lattice instability to be dominated by changes of interatomic interactions along a bilayer-connecting bond, rather than of an intralayer bonding network that is of primary importance to the lattice instability in thermal equilibrium.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Isoplethal study of phase formation and morphology in uranium-304L steel via scanning electron microscopy

Understanding the formation of uranium alloys with steel is important to advance nuclear technologies involving U metal fuels and machining U metal, and for nuclear forensics applications. No known phase diagram for the quaternary U-(M = Fe, Ni, Cr) system exists. For this work, we synthesize samples of U-304 L steel (nominal composition 70.1:18.3:10.4 at% Fe:Cr:Ni) across the U composition range 4.45—63.35 at%U by arc melting under inert conditions. Using the binary UFe phase diagram as a reference, we identify four U-steel alloy phases. We find the known U-Fe analogue phases UM 2 and U 6 M, and two low-U composition phases with nominal compositions UM 10 and U 2 M 7 . We apply a correlation length analysis to backscatter scanning electron microscopy images of sectioned and polished cross sections to quantify the domain formation length scale. We demonstrate that these depend heavily on the initial composition and range from 30 nm to 1.5 µm. This result, in particular, could be applicable to theoretical predictions of transport properties. Furthering our understanding of U alloy phase formation with important structural elements such as steel primaries is foundational in developing future nuclear technology.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Fluorescent aggregate structure revealed in bisphenol F epoxy thermoset

Bisphenol F (BPF) epoxy resin is a prepolymer component of thermosets used in construction of reinforced carbon fiber composites (RCFC). The fluorescence of this resin can provide information about chemical and structural alterations of the thermoset from thermal or mechanical damage. While some work has investigated the fluorescence spectra of bisphenol A epoxy resin, a structural analog of BPF, none have studied BPF. The purpose of this study is to investigate the baseline fluorescence spectra of the BPF epoxy resin for features that could be utilized for monitoring damage and structural alterations. Bisphenol F epoxy resin was found to have two emission peaks with a broad peak centered at 410 nm and a sharp peak centered at 550 nm. The broad emission peak was identified as the fluorescence from BPF epoxy monomer while the sharp emission peak was found to be from an aggregate structure present in the epoxy resin. It is hypothesized that this structure is an H-aggregate based on the emission features and structural stability of the aggregate compared to the alternative J-aggregate which was determined via density functional theory calculations. The H-aggregate was found to persist into one of the cured thermoset formulations evaluated but was lost when exposed to elevated temperatures below thermal degradation of the thermoset. This loss of aggregate structure was due to polymer network rearrangement. This new fluorescence signature can be used as an indicator of polymer network rearrangement from thermal exposure which may alter the expected material performance and precede thermal degradation.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Insights into the thermal history of carbon fibers using Raman spectroscopy and a novel kinetic model

Carbon fibers and carbon fiber composites are applied in high-performance applications, but a key consideration for application is their relative sensitivity to oxidative environments. To enable in-situ characterization of carbon fibers exposed to oxidative conditions, the Raman spectral response of T700 carbon fibers that have been exposed to a variety of dwell temperatures is reported herein with dwell times reaching up to 1 month. Here, we evaluate the spectra holistically by using integrated absolute difference analysis. By combining this analysis with straightforward kinetic models, we connect the total Raman spectral response to the temperature-time curve that could yield such a shift in spectral parameters. Our work connects the Raman spectral response of carbon fibers to their thermal history and can easily be extended to other graphitic materials, such as nuclear graphite.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Vibrational dynamics in the undercooled liquid of ultra-fragile metallic glasses

Here, the lattice vibrational dynamics in ultra-fragile Pt 57 Cu 23 P 20 and Pt 60 Cu 20 P 20 glasses were investigated using in situ inelastic neutron scattering to measure the evolution of the phonon density of states (DOS) through the glass transition, into the undercooled liquid phase, and through crystallization. The phonon DOS curves are remarkably similar for the undercooled liquids and the amorphous solids. The vibrational entropy was obtained with these phonon DOS curves, and changes in vibrational entropy caused by the glass transition are less than 0.05 k B /atom. For these highly fragile metal/metalloid glasses, the excess vibrational entropy of the undercooled liquid is about 0.5–1.5 Jmol -1 K -1 , compared to 0.1 Jmol -1 K -1 reported earlier for stronger Cu–Zr glasses. Our work suggests that, consistent with our previous report for less fragile metallic glasses, the fraction of the total excess entropy that is vibrational is small, and the discontinuity in excess entropy at the glass transition is mainly due to configurational entropy.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Computational investigation of hydrogen-induced phonon changes in carbon fiber

Optical vibrational spectroscopy has shown promise as a noninvasive means of monitoring the mechanical properties of carbon fiber (CF), which is increasingly used for industrial and consumer purposes. However, interpretation of optical vibrational spectra for solid materials is inferential, particularly when defects are present. Because inelastic neutron scattering (INS) spectroscopy is not subject to selection rules, the full vibrational spectra can be measured. And, identifying correlations between INS features and tensile properties can assist in the interpretation of spectra from more commonly used optical vibrational spectroscopic techniques, such as Raman and infrared (IR) spectroscopy. Recent INS experiments on high-performance commercial carbon fibers showed features near 900 and 1100 cm –1 in addition to a broad feature near 3000 cm –1 that increased in intensity with decreasing tensile strength. These features were assigned to hydrogen defects. Here, we use density functional theory to simulate the INS spectra of several hydrogen defect geometries in graphite as a model for carbon fiber structure units, confirming the experimental assignment of these peaks to hydrogen modes and providing insights into the structure and lattice dynamics of the defects.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Unexpected features in the optical vibrational spectra of δ-UO 3

Uranium trioxide displays a complex chemical phase space, with at least six structurally distinct polymorphs accessible via different synthetic routes. Remarkably, despite its technological importance, full structural and electronic characterization of these polymorphs remains an open area of study. δ-UO 3 in particular has attracted significant theoretical attention due to its high point group and space group symmetries, having U (VI) in octahedral coordination with polyhedra interconnected through corner-sharing to build a 3-D cubic lattice with space group symmetry Pm-3m and Z = 1. Critical experimental information, such as its optical vibrational spectra, are not known. Here, we study the Raman and infrared (IR) spectra of δ-UO 3 together with the support of density functional theory (DFT) calculations for spectral interpretation. A symmetry analysis of the DFT-predicted phonon eigenmodes indicates that δ-UO 3 should have two IR active modes and no Raman active modes. Experimental results, however, indicate significant Raman scattering from δ-UO 3 . We therefore propose four potential explanations for this apparent contradiction: a possible tetragonal distortion to the cubic cell, the existence of a surface impurity layer, vacancy scattering, and structural activation of Raman signal. We use powder X-ray diffraction and confocal Raman spectroscopy with depth profiling to investigate these possibilities and suggest future experiments to explore this phenomenon in more detail. Understanding the lattice dynamics of δ-UO 3 is important for identification of technogenic U phases via Raman and infrared spectroscopy and our results indicate that the simple understanding of δ-UO 3 as a high-symmetry cubic structure should be reconsidered.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2022

Density functional theory investigations into the magnetic ordering of U 3 O 8

Density functional theory (DFT) has been highly successful in supporting experimental materials science; however, a correct electronic ground state is required to realize the full theoretical capacity of DFT. The uranium oxides, α–U 3 O 8 in particular, are simultaneously technologically important materials and theoretically challenging for DFT because the uranium magnetic ground state is not obvious. This is true for both experiment and theory—magnetic susceptibility measurements indicate an antiferromagnetic (AFM) ground state with transitions near 4.2 and 8.0 K, but the ordering itself is not known. Theoretical literature reports are in contradiction, with independent studies finding paramagnetic, ferromagnetic (FM), and AFM states as the lowest energy configuration. However, recent inelastic neutron scattering experiments suggested an uninvestigated magnetic structure with ordering along the [0.5 1 1] plane, motivating a theoretical reinvestigation. Using this insight, we calculated the relative energy of FM and AFM orderings along [0.5 1 1], [0.5 0 0], [0 1 0], and [0 0 1] using noncollinear DFT calculations with spin-orbital coupling. In this work, we found that the [0.5 1 1] AFM structure is lower in energy than FM or AFM orderings along the low Miller index directions. We also investigated polarization of the magnetic moment along each lattice vector and found that polarization along the out-of-plane direction is the energetically preferred orientation for the AFM structures. Additionally, we found in all calculations that moments initially pointing along the in-plane lattice vectors significantly relax until they point along the coordinate between the two crystallographically distinct uranium sites with complex noncollinear magnetic configurations. The new [0.5 1 1] AFM magnetic structure provides an additional path forward toward understanding the electronic structure of α-U 3 O 8 and lends theoretical credibility to recent neutron scattering results.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Structural Characterization of Uranium Tetrafluoride Hydrate (UF 4 ·2.5H 2 O)

Uranium tetrafluoride is an important intermediate in the nuclear fuel cycle. Facile synthesis of its hydrate, uranium tetrafluoride hydrate (UF 4 ·2.5H 2 O), has recently been reported. The hydrate forms by contacting anhydrous UF 4 with neat H 2 O at room temperature for 24 h or by exposing anhydrous UF 4 to high relative humidity (>90%) conditions for several weeks. These pathways are of clear environmental relevance. Further understanding of the structure and optical spectra of UF 4 ·2.5H 2 O, especially of the water molecules, is therefore necessary. Herein, the structure of UF 4 ·2.5H 2 O was probed using time-of-flight neutron powder diffraction to improve understanding of the crystalline water environments in the structure. The complete structure was elucidated and compared to a previously reported partial structure for UF 4 ·2.5H 2 O and a predicted complete structure from density functional theory. The crystalline structure exhibits three distinct water environments: two of the three water sites are bound to uranium, and the third water is unbound or “free”. Furthermore, the completed structure reveals an extensive hydrogen bonding network involving water–fluorine and water–water interactions. One bound water site participates in hydrogen bonding with nearby fluoride ligands (O–H···F–U), and the second bound water site participates in hydrogen bonding with the unbound water (O–H···O) and a nearby fluoride ligand (O–H···F–U); the unbound water participates in hydrogen bonding with bound water (O–H···O–U). Low-temperature experiments and thermal analysis indicate UF 4 ·2.5H 2 O is thermally stable from 10 to 358 K, undergoes dehydration at higher temperatures, and is nearly dehydrated at 473 K. Structural measurements provide foundational understanding and will inform future investigations of the thermal and environmental stability of UF 4 ·2.5H 2 O.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Raman spectroscopy of thermally perturbed carbon fibers: Discriminating spectral responses of modulus classes and defect types

The mechanical strength properties of carbon fibers are generally thought to be correlated with the presence of underlying atomic-level defects. These defects serve to break the underlying translational symmetry of the graphitic or graphene subunits of the fiber construction, resulting in the emergence of new Raman-active spectral features. However, historical attempts to classify the precise origin of defect contributions to the Raman spectra have been challenging because of indistinct and overlapping features in the carbon fiber Raman spectra. Further, while substantial research exists on high-temperature exposure in inert atmospheres for carbon fiber composites, comparatively less addresses microscale behaviors and Raman spectral alterations to monofilament carbon fibers exposed to high-temperature atmospheric environments. Here, we report Raman spectral responses of nine commercially available high-performance, polyacrylonitrile-based carbon fibers exposed to various atmospheric heat treatments. In this work, we introduce a model-independent characterization method, the integrated absolute difference, to quantify the spectral responses to heat treatment of different fiber modulus classes. We combine this new method with a newly reported strategy to standardize spectral fitting for carbon fibers. With this approach, we show that atomic-scale defects in the underlying fiber microstructure manifest in measurably distinct manners and have distinct responses to thermal perturbation. These combined approaches may lay the foundation for disentangling contributions from specific defects in the Raman spectra of carbon fibers.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Product specific thermal degradation kinetics of bisphenol F epoxy in inert and oxidative atmospheres using evolved gas analysis–mass spectrometry

Knowledge of the degradation kinetics for polymer materials is important for understanding thermal stability. In this study, evolved gas analysis–mass spectrometry and pyrolysis gas-chromatography-mass spectrometry were evaluated for the potential to deliver additional insight into thermal degradation kinetics of diglycidal ether of bisphenol F (DGEBF) epoxy thermoset under inert and oxidative atmospheres. Degradation products of selected precursor ions were evaluated for their uniqueness to the specific precursor using extracted ion thermographs. Unique mass peaks, solely attributed to a single reaction pathway of a specific product, were determined from extracted ion thermographs and used to determine both activation energy (E a ) and pre-exponential factors for the specific primary reaction pathways. These primary reaction pathways for DGEBF epoxy degradation were then evaluated in the context of transition state theory (TST) and related transition state enthalpies (ΔH ‡ ) and entropies (ΔS ‡ ) of activation to further elucidate the degradation process. It was determined under pyrolysis conditions, as suggested by the E a , the formation of bisphenol F monomer was the rate-limiting step toward the formation of xanthene and phenol. In contrast, under thermo-oxidative conditions, reactions involving oxygen containing species were identified as the rate-limiting step for all observed products based on the large negative ΔS ‡ calculated from TST. This work demonstrates a powerful combination of technique and theory that can provide new insight into the degradation of polymer materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Optical vibrational spectra and proposed crystal structure of ε-UO 3

ε-UO 3 is an exotic polymorph in the uranium trioxide system with an undetermined crystal structure and limited optical vibrational spectroscopic data. To improve understanding of this compound, we synthesize and investigate the crystal structure and optical vibrational spectra of ε-UO 3 . Infrared spectra collected for ε-UO 3 are in good agreement with previously published results, and our studies extend the available data into the low-energy (600–100 cm –1 ) regime. For the first time, Raman spectra are presented for ε-UO 3 using both 785 and 532 nm excitation wavelengths. Previous reports suggest an impurity phase may be present in ε-UO 3 produced by calcination of U 3 O 8 ; however, spectral center-of-mass calculations, principal component analyses, and Raman spectroscopic mapping employed to investigate this possibility indicate that the product of U 3 O 8 calcined in O 3 (g) in this work is likely phase-pure. A possible novel structure solution for ε-UO 3 is determined via Rietveld refinement of powder X-ray diffraction data and is triclinic, P-1, with a = 4.01 Å, b = 3.85 Å, c = 4.18 Å, and α = 98.26°, β = 90.41°, γ = 120.46° (R wp = 8.30%). The asymmetric unit of ε-UO 3 consists of U(VI) in hexagonal bipyramidal coordination with displaced equatorial oxygen. Further analysis reveals that the structure of ε-UO3 is best described by a 2 × 1 × 2 supercell structure in P-1 with a = 8.03 Å, b = 3.86 Å, c = 8.37 Å with α = 98.26°, β = 90.41°, and γ = 120.46°, although a higher-symmetry structure is possible. Optical vibrational spectroscopic and structural measurements of ε-UO 3 presented here furthers our understanding of this complex uranium oxide and clarifies the origin of reported structural similarity to U 3 O 8 .

-UO3↗
DOE OSTI2021

Quantitative analysis of Raman spectral parameters for carbon fibers: practical considerations and connection to mechanical properties

Although the literature on the Raman spectra of carbon fibers is vast, no consistent, robust predictive relationship between mechanical properties of carbon fibers and spectral parameters exists. This shortcoming is due to the use of numerous fitting functions to evaluate Raman spectra of carbon fibers and the inconsistencies in establishing the best fitting models in a statistically robust fashion. To address this gap, we present a comprehensive work on the Raman spectra of carbon fibers that combines a vast library of experimental data with a robust numerical analysis and a statistical evaluation of a wide range of suggested fitting models. This manuscript begins with a brief review of the commonly applied fitting models. Then, the Raman spectra of 32 commercially available polyacrylonitrile-based carbon fibers collected at excitation wavelengths 532, 633, and 785 nm are presented and the best fit for all fibers is evaluated based on several statistical criteria in conjunction with numerical calculations and physical arguments. The results suggest that high-performance fibers must be fit with at least five peaks, whereas high-tensile modulus fibers are best fit with at least six distinct peaks. Finally, we employ simultaneous fitting of the Raman spectra of specific fibers and wavelengths and demonstrate that strong correlations exist between mechanical properties and the D1 peak position and shape across the range of evaluated mechanical properties. Finally, we suggest straightforward improvements in fitting analysis procedures that can be implemented to increase coherency in the understanding of the underlying carbon fiber microstructure intuited from Raman spectroscopy.

36 MATERIALS SCIENCE↗