Search NASA⌕ Search

Engineering topics

Nolen, J

Publications and source records attributed to Nolen, J.

Fragment separator momentum compression schemes.

We present a scheme to use a fragment separator and profiled energy degraders to transfer longitudinal phase space into transverse phase space while maintaining achromatic beam transport. The first order beam optics theory of the method is presented and the consequent enlargement of the transverse phase space is discussed. An interesting consequence of the technique is that the first order mass resolving power of the system is determined by the first dispersive section up to the energy degrader, independent of whether or not momentum compression is used. The fragment separator at the Facility for Rare Isotope Beams is a specific application of this technique and is described along with simulations by the code COSY INFINITY.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Scalable direct Vlasov solver with discontinuous Galerkin method on unstructured mesh.

This paper presents the development of parallel direct Vlasov solvers with discontinuous Galerkin (DG) method for beam and plasma simulations in four dimensions. Both physical and velocity spaces are in two dimesions (2P2V) with unstructured mesh. Contrary to the standard particle-in-cell (PIC) approach for kinetic space plasma simulations, i.e., solving Vlasov-Maxwell equations, direct method has been used in this paper. There are several benefits to solving a Vlasov equation directly, such as avoiding noise associated with a finite number of particles and the capability to capture fine structure in the plasma. The most challanging part of a direct Vlasov solver comes from higher dimensions, as the computational cost increases as N{sup 2d}, where d is the dimension of the physical space. Recently, due to the fast development of supercomputers, the possibility has become more realistic. Many efforts have been made to solve Vlasov equations in low dimensions before; now more interest has focused on higher dimensions. Different numerical methods have been tried so far, such as the finite difference method, Fourier Spectral method, finite volume method, and spectral element method. This paper is based on our previous efforts to use the DG method. The DG method has been proven to be very successful in solving Maxwell equations, and this paper is our first effort in applying the DG method to Vlasov equations. DG has shown several advantages, such as local mass matrix, strong stability, and easy parallelization. These are particularly suitable for Vlasov equations. Domain decomposition in high dimensions has been used for parallelization; these include a highly scalable parallel two-dimensional Poisson solver. Benchmark results have been shown and simulation results will be reported.

99 GENERAL AND MISCELLANEOUS↗

Development of stripper options for FRIB

The US Department of Energy Facility for Rare Isotope Beams (FRIB) at Michigan State University includes a heavy ion superconducting linac capable of accelerating all ions up to uranium with energies higher than 200 MeV/u and beam power up to 400 kW. To achieve these goals with present ion source performance it is necessary to accelerate simultaneously two charge states of uranium from the ion source in the first section of the linac. At an energy of approximately 16.5 MeV/u it is planned to strip the uranium beam to reduce the voltage needed in the rest of the linac to achieve the final energy. Up to five different charge states are planned to be accelerated simultaneously after the stripper. The design of the stripper is a challenging problem due to the high power deposited (approximately 0.7 kW) in the stripper media by the beam in a small spot. To assure success of the project we have established a research and development program that includes several options: carbon or diamond foils, liquid lithium films, gas strippers and plasma strippers. We present in this paper the status of the different options.

43 PARTICLE ACCELERATORS↗

Identification of 45 new neutron-rich isotopes produced by in-flight fission of a {sup 238}U beam at 345 MeV/nucleon.

A search for new isotopes using in-flight fission of a 345 MeV/nucleon {sup 238}U beam has been carried out at the RI Beam Factory at the RIKEN Nishina Center. Fission fragments were analyzed and identified by using the superconducting in-flight separator BigRIPS. We observed 45 new neutron-rich isotopes: {sup 71}Mn, {sup 73,74}Fe, {sup 76}Co, {sup 79}Ni, {sup 81,82}Cu, {sup 84,85}Zn, {sup 87}Ga, {sup 90}Ge, {sup 95}Se, {sup 98}Br, {sup 101}Kr, {sup 103}Rb, {sup 106,107}Sr, {sup 108,109}Y, {sup 111,112}Zr, {sup 114,115}Nb, {sup 115,116,117}Mo, {sup 119,120}Tc, {sup 121,122,123,124}Ru, {sup 123,124,125,126}Rh, {sup 127,128}Pd, {sup 133}Cd, {sup 138}Sn, {sup 140}Sb, {sup 143}Te, {sup 145}I, {sup 148}Xe, and {sup 152}Ba.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Direct Vlasov solvers with high-order spectral element method.

This paper presents the development of parallel direct Vlasov solvers using the Spectral Element Method (SEM). Instead of the standard Particle-In-Cell (PIC) approach for kinetic space plasma simulation, i.e. solving the Vlasov-Maxwell equations, the direct method has been used in this paper. There are several benefits to solve the Vlasov equation directly, such as avoiding noise associated with the finite number of particles and the capability to capture the fine structure in the plasma, etc. The most challenging part of direct Vlasov solver comes from high dimension, as the computational cost increases as N{sup 2d}, where d is the dimension of the physical space. Recently due to fast development of supercomputers, the possibility of high dimensions becomes more realistic. A significant effort has been devoted to solve the Vlasov equation in low dimensions so far, now more interests focus on higher dimensions. Different numerical methods have been tried so far, such as finite difference method, Fourier spectral method, finite volume method, etc. In this paper SEM has been successfully applied to construct these solvers. SEM has shown several advantages, such as easy interpolation due to local element structure and long time integration due to its high order accuracy. Domain decomposition in high dimensions have been used for parallelization, these include scalable parallel 1D and 2D Poisson solvers. Benchmark results have been shown and simulation results have been reported for two different cases: one dimension (1P1V), and two dimensions (2P2V) in both physical and velocity spaces.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Experimental study of the {sup 56}Ni({sup 3}He,d){sup 57}Cu reaction in inverse kinematics

Measurements of ({sup 3}He,d) reactions can provide information on the proton widths of states that play a role in astrophysically important (p,{gamma}) reactions. We report on the first study of the ({sup 3}He,d) reaction in inverse kinematics with a {sup 56}Ni (T{sub 1/2}=6.1 d) ion beam. The Q-value resolution of {approx} keV achieved in this experiment was sufficient to separate the transitions populating the ground state and the 1/2{sup -}-5/2{sup -} doublet at E{sub x}{approx}1.1 MeV in {sup 57}Cu. Prospects for similar ({sup 3}He,d) experiments with improved energy resolution are also discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Development of a liquid lithium thin film for use as a heavy ion beam stripper.

A series of experiments was performed to investigate the feasibility of a liquid lithium thin film for a charge stripper in a high-power heavy ion linac. Various preliminary experiments using simulants were first conducted to determine the film formation scheme, to investigate the film stability, and to obtain the design parameters for a liquid lithium thin film system. Based on the results from these preliminary studies, a prototypical, high pressure liquid lithium system was constructed to demonstrate liquid lithium thin film formation. This system was capable of driving liquid lithium at {approx}< 300 C and up to 13.9 MPa (2000 psig) through a nozzle opening as large as 1 mm (40 mil) in diameter. This drive pressure corresponds to a Li velocity of >200 m/s. A thin lithium film of 9 mm in width at velocity of {approx}58 m/s was produced. Its thickness was estimated to be roughly {approx}< 13 {micro}m. High vacuum was maintained in the area of the film. This type of liquid metal thin film may also be used in other high power beam applications such as for intense X-ray or neutron sources.

74 ATOMIC AND MOLECULAR PHYSICS↗

Transfer map approach to an optical effects of energy degraders on the perfomance of fragment separators.

A second order analytical and an arbitrary order numerical procedure is developed for the computation of transfer maps of energy degraders. The incorporation of the wedges into the optics of fragment separators for next-generation exotic beam facilities, their optical effects, and the optimization of their performance is studied in detail. It is shown how to place and shape the degraders in the system such that aberrations are minimized and resolving powers are maximized.

43 PARTICLE ACCELERATORS↗

Conceptual design of a superconducting quadrupole with elliptical acceptance and tunable higher order multipoles.

For charged particle beams that are wider in the dispersive plane compared to the transverse plane it is cost efficient to utilize magnets that accept beams with elliptic cross section. In this paper we presents the conceptual design of a quadrupole magnet with elliptic cross section and with tunable higher order multipoles. The design consists of 18 superconducting race-track coils placed on two hollow concentric rhombic prism support structures. To compute the magnetic field for the proposed design a new method of calculating 2D and 3D fields for the air core magnets based on differential algebra (DA) techniques is developed. We will present the new method and discuss its implementation of new numerical tools based on this method in the code COSY Infinity.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Design study of a pre-separator for the LINAG super separator spectrometer.

The super separator spectrometer (S3) is a device being designed for experiments with the very high intensity stable beams of LINAG, the superconducting linear accelerator of GANIL, which will be built in the framework of SPIRAL2. These beams, which will be provided in the first phase of SPIRAL2, ions with A/q = 3 can reach intensities exceeding 100 p {mu}A for lighter ones A<40-50 depending on the final choice of the ECR (electron cyclotron resonance) ion source. These unprecedented intensities open new opportunities in several physics domains, e.g.: super-heavy and very-heavy nuclei, spectroscopy at and beyond the dripline, multi-nucleon transfer and deep-inelastic reactions, isomers, ground state properties and molecular resonances. An international collaboration has been formed for proposing physics experiments and developing technical solutions for this new instrument. All of the experiments mentioned have the common feature of requiring the separation of very rare events from intense backgrounds. Hence, the present study is aimed at finding an appropriate technical solution for a pre-separator stage of S3. In this paper we propose some possible approaches and discuss the challenges in addressing the ion optical issues of this device. Three different layouts have been considered to date. Further studies are in progress.

43 PARTICLE ACCELERATORS↗

On a thermal analysis of a second stripper for rare isotope accelerator.

This memo summarizes simple calculations and results of the thermal analysis on the second stripper to be used in the driver linac of Rare Isotope Accelerator (RIA). Both liquid (Sodium) and solid (Titanium and Vanadium) stripper concepts were considered. These calculations were intended to provide basic information to evaluate the feasibility of liquid (thick film) and solid (rotating wheel) second strippers. Nuclear physics calculations to estimate the volumetric heat generation in the stripper material were performed by 'LISE for Excel'. In the thermal calculations, the strippers were modeled as a thin 2D plate with uniform heat generation within the beam spot. Then, temperature distributions were computed by assuming that the heat spreads conductively in the plate in radial direction without radiative heat losses to surroundings.

43 PARTICLE ACCELERATORS↗

A parallel 3D poisson solver for space charge simulation in cylindrical coordinates.

This paper presents the development of a parallel three-dimensional Poisson solver in cylindrical coordinate system for the electrostatic potential of a charged particle beam in a circular tube. The Poisson solver uses Fourier expansions in the longitudinal and azimuthal directions, and Spectral Element discretization in the radial direction. A Dirichlet boundary condition is used on the cylinder wall, a natural boundary condition is used on the cylinder axis and a Dirichlet or periodic boundary condition is used in the longitudinal direction. A parallel 2D domain decomposition was implemented in the (r,{theta}) plane. This solver was incorporated into the parallel code PTRACK for beam dynamics simulations. Detailed benchmark results for the parallel solver and a beam dynamics simulation in a high-intensity proton LINAC are presented. When the transverse beam size is small relative to the aperture of the accelerator line, using the Poisson solver in a Cartesian coordinate system and a Cylindrical coordinate system produced similar results. When the transverse beam size is large or beam center located off-axis, the result from Poisson solver in Cartesian coordinate system is not accurate because different boundary condition used. While using the new solver, we can apply circular boundary condition easily and accurately for beam dynamic simulations in accelerator devices.

43 PARTICLE ACCELERATORS↗