Engineering topics

Nolet, Simon

Publications and source records attributed to Nolet, Simon.

5 records

NASA NTRS2012

Cassini Orbit Determination Performance (July 2008 - December 2011)

This paper reports on the orbit determination performance for the Cassini spacecraft from July 2008 to December 2011. During this period, Cassini made 85 revolutions around Saturn and had 52 close satellite encounters. 35 of those were with the massive Titan, 13 with the small, yet interesting, Enceladus as well as 2 with Rhea and 2 with Dione. The period also includes 4 double encounters, where engineers had to plan the trajectory for two close satellite encounters within days of each other at once. Navigation performance is characterized by ephemeris errors relative to in-flight predictions. Most Titan encounters 3-dimensional results are within a 1.5 formal sigma, with a few exceptions, mostly attributable to larger maneuver execution errors. Results for almost all other satellite encounter reconstructions are less than 3 sigma from their predictions. The errors are attributable to satellite ephemerides errors and in some cases to maneuver execution errors.

navigation performance↗

NASA NTRS2011

Optical navigation planning process for the Cassini Solstice Mission

During the Cassini Equinox Mission, the Optical Navigation strategy has gradually evolved toward maintenance of an acceptable level of uncertainty on the positions of the bodies to be observed. By counteracting the runoff of the uncertainty over time, this strategy helps satisfy the spacecraft pointing requirements throughout the Solstice Mission, while considerably reducing the required imaging frequency. Requirements for planning observations were established, and the planning process itself was largely automated to facilitate re-planning if it becomes necessary. This paper summarizes the process leading to the optical navigation schedule for the seven years of the Solstice Mission.

Cassini↗

NASA NTRS2010

Autonomous GN and C for Spacecraft Exploration of Comets and Asteroids

A spacecraft guidance, navigation, and control (GN&C) system is needed to enable a spacecraft to descend to a surface, take a sample using a touch-and-go (TAG) sampling approach, and then safely ascend. At the time of this reporting, a flyable GN&C system that can accomplish these goals is beyond state of the art. This article describes AutoGNC, which is a GN&C system capable of addressing these goals, which has recently been developed and demonstrated to a maturity TRL-5-plus. The AutoGNC solution matures and integrates two previously existing JPL capabilities into a single unified GN&C system. The two capabilities are AutoNAV and GREX. AutoNAV is JPL s current flight navigation system, and is fairly mature with respect to flybys and rendezvous with small bodies, but is lacking capability for close surface proximity operations, sampling, and contact. G-REX is a suite of low-TRL algorithms and capabilities that enables spacecraft operations in close surface proximity and for performing sampling/contact. The development and integration of AutoNAV and G-REX components into AutoGNC provides a single, unified GN&C capability for addressing the autonomy, close-proximity, and sampling/contact aspects of small-body sample return missions. AutoGNC is an integrated capability comprising elements that were developed separately. The main algorithms and component capabilities that have been matured and integrated are autonomy for near-surface operations, terrain-relative navigation (TRN), real-time image-based feedback guidance and control, and six degrees of freedom (6DOF) control of the TAG sampling event. Autonomy is achieved based on an AutoGNC Executive written in Virtual Machine Language (VML) incorporating high-level control, data management, and fault protection. In descending to the surface, the AutoGNC system uses camera images to determine its position and velocity relative to the terrain. This capability for TRN leverages native capabilities of the original AutoNAV system, but required advancements that integrate the separate capabilities for shape modeling, state estimation, image rendering, defining a database of onboard maps, and performing real-time landmark recognition against the stored maps. The ability to use images to guide the spacecraft requires the capability for image-based feedback control. In Auto- GNC, navigation estimates are fed into an onboard guidance and control system that keeps the spacecraft guided along a desired path, as it descends towards its targeted landing or sampling site. Once near the site, AutoGNC achieves a prescribed guidance condition for TAG sampling (position/orientation, velocity), and a prescribed force profile on the sampling end-effector. A dedicated 6DOF TAG control then implements the ascent burn while recovering from sampling disturbances and induced attitude rates. The control also minimizes structural interactions with flexible solar panels and disallows any part of the spacecraft from making contact with the ground (other than the intended end-effector).

Carson, John M.↗

NASA NTRS2010

Optical Navigation Plan and Strategy for the Lunar Lander Altair

This paper reviews the currently planned Altair Optical Navigation (OpNav) system. The discussion includes description of the OpNav camera manifest. The Altair OpNav plan envisions one, OpNav camera assembly, with perhaps a functional backup that includes a wide angle-imager (of 40 deg to 60 deg field of view - FOV), and a narrow angle imager (of 1 to 3 deg FOV) co-mounted on a 2-degree-of-freedom gimbal. Both imagers are assumed to be relatively wide aperture and large dynamic range to provide excellent short-exposure images at mid-latitudes, and adequate images of longer-exposure near the poles. Landmark modeling and tracking methodology is discussed, including the stereophotoclinometry method assumed to be used to obtain high-accuracy terrain maps at lunar landing sites of 1 - 2 m, and 50 - 100 m elsewhere, using the images expected to be obtained from the Lunar Reconnaissance Orbiter (LRO). Characteristics of the OpNav navigation system are discussed and architecture and results from landing simulations presented, showing expected landing accuracies of better than 10m.

TAG↗

NASA NTRS2004

SPHERES as Formation Flight Algorithm Development and Validation Testbed: Current Progress and Beyond

The MIT-SSL SPHERES testbed provides a facility for the development of algorithms necessary for the success of Distributed Satellite Systems (DSS). The initial development contemplated formation flight and docking control algorithms; SPHERES now supports the study of metrology, control, autonomy, artificial intelligence, and communications algorithms and their effects on DSS projects. To support this wide range of topics, the SPHERES design contemplated the need to support multiple researchers, as echoed from both the hardware and software designs. The SPHERES operational plan further facilitates the development of algorithms by multiple researchers, while the operational locations incrementally increase the ability of the tests to operate in a representative environment. In this paper, an overview of the SPHERES testbed is first presented. The SPHERES testbed serves as a model of the design philosophies that allow for the various researches being carried out on such a facility. The implementation of these philosophies are further highlighted in the three different programs that are currently scheduled for testing onboard the International Space Station (ISS) and three that are proposed for a re-flight mission: Mass Property Identification, Autonomous Rendezvous and Docking, TPF Multiple Spacecraft Formation Flight in the first flight and Precision Optical Pointing, Tethered Formation Flight and Mars Orbit Sample Retrieval for the re-flight mission.

Kong, Edmund M.↗