Search NASA⌕ Search

Engineering topics

Noring, Alex

Publications and source records attributed to Noring, Alex.

Techno-Economic Analysis of Reversible and Paired Solid Oxide Cell Systems for Hydrogen Production

This is the Journal of the Electrochemical Society manuscript that details an NETL analysis on comparing the performance and cost of reversible solid oxide cell (SOC) units versus paired fuel cell (SOFC) and electrolysis cell (SOEC) units. The analysis compares tradeoffs such as capital costs versus rate of performance degradation, sensitivity to natural gas prices, sensitivity to imported power costs, and other relevant analyses. The systems include a high rate (98%) of carbon capture. The analysis shows that given a certain cost of electricity input, either approach could be viable in the market and points to the need to incorporate into a full system to understand impacts.

Noring, Alex↗

Techno-Economic Analysis of an SOFC Hybrid Carbon Conversion Concept

This is a presentation prepared for the 2023 Hydrogen and Fuel Cell Seminar to take place in Long Beach, CA on February 7-9, 2023. The presentation highlights analysis recently conducted by NETL on the cost and performance associated with operating SOFC systems in a hybridized configuration with compressed air energy storage.

Buchheit, Kyle L.↗

Techno-Economic Analysis of Integrated Gasification Fuel Cell Systems

This National Energy Technology Laboratory (NETL) study describes the results of a pathway study for coal-based integrated gasification and solid oxide fuel cell (IGFC) power systems with and without carbon capture and storage. Two pathway scenarios are considered, based on the operating pressure of the SOFC. Three gasification technologies, including a conventional technology, differing in the syngas methane content, which has a significant effect on the IGFC system performance, were considered. The performance and cost benefits were estimated for a series of projected gains made through the development of advances in the component technologies or improvements in plant costs and availability. The objective of the study is to provide targeted research and development guidance to the FECM SOFC Program and SOFC commercial developers.

30 DIRECT ENERGY CONVERSION↗

Solid Oxide Cell and Stack Manufacturing Cost Tool

This is the user manual for the SOC Manufacturing Cost Tool spreadsheet. The manual details the use and meaning of each tab, color scheme, and spreadsheet operation. Also detailed are specific instructions for end-user modification and inputs to tailor the tool to their specific technology. To access the cost tool, please visit: <a href="https://netl.doe.gov/energy-analysis/details?id=d224ad08-6a38-402a-9cad-907db19e394f" rel="noopener noreferrer">Energy Analysis | netl.doe.gov</a>.

cost modeling↗

Solid Oxide Cell Manufacturing Cost Tool

NETL has developed a detailed solid oxide cell (SOC) cost modeling tool. The tool provides a fully customizable spreadsheet that aids in cost estimation of large volume manufacturing of SOC (both fuel cell and electrolysis cell). The tool can be used to assist commercial developers and other end users to evaluate the costs of producing cells and stack components as SOC systems increase in scale. The manufacturing materials, labor, component costs, and specific equipment can be tailored to accurately reflect the desired manufacturing process. The tool is paired with a detailed user manual to assist in the understanding of the full functionality. This document is the spreadsheet tool. To access the associated user guide, please visit: <a href="https://netl.doe.gov/energy-analysis/details?id=f5823130-0d20-4a04-9c53-341682e58ac1" rel="noopener noreferrer">Energy Analysis | netl.doe.gov</a>

cost modeling↗

Technical Assessment of Novel Hydrogen Producing Solid Oxide Fuel Cell Power System

Solid oxide cell-based electrolysis (SOEC) systems are being considered for hydrogen production due to their potential for high efficiencies and for their integrability with base load power generation systems when operated in solid oxide fuel cell (SOFC) mode. However, a cost prohibitive combination of SOFC power systems and SOEC systems may be required to operate the plant flexibly to produce a combination of H 2 and power on-demand. A single (consequently less expensive) reversible SOFC/SOEC system, on the other hand, poses technological challenges related to the on demand switching between power and H 2 production. This report provides a high-level technical assessment of a novel SOFC based H 2 production concept that averts the potential drawbacks of the SOEC systems. The novel concept combines the advantages of steam-reforming of natural gas to produce H 2 with the high efficiency power generation capabilities of a SOFC in a single package.

30 DIRECT ENERGY CONVERSION↗

Techno-Economic Analysis of Integrated Gasification Fuel Cell Systems

This is a presentation that was delivered virtually at the 2020 International Pittsburgh Coal Conference. In the presentation, details of the cost and performance parameter improvement due to incremental changes made in gasification and fuel cell operation and system configurations were presented. High level results indicate that SOFC fueled by coal-derived synthesis gas can be competitive with other fossil-based energy generation technologies when significant improvement to gasification technology is made and carbon capture is included. The cost of carbon capture of this system is very low due to the high efficiency of the SOFC and the high system fuel utilization due to the vent gas recirculation concept which recirculates hydrogen in the effluent back to the cell.

Noring, Alex↗

Wyoming CCUS Study: Regional Electricity and Environmental Markets

This study is accompanies the Leonardo Technologies, Inc. study performed for the Office of Fossil Energy entitled: ''Wyoming Carbon Capture, Utilization, and Storage (CCUS) Report''. In this study, NETL examined the regional electricity and environmental markets impacts of maintaining coal-fired generating units identified for retirement in the 2019 PacifiCorp Integrated Resource Plan (IRP) through retrofit with CCUS. In this study, the authors propose an alternative least cost resource portfolio that includes a CCUS option along with resources identified in the IRP required to meet service obligations. This alternative portfolio is estimated to produce a lower CO 2 emissions footprint and a lower cost to the consumer than the proposed IRP.

01 COAL, LIGNITE, AND PEAT↗