Search NASA⌕ Search

Engineering topics

Norton, David P.

Publications and source records attributed to Norton, David P..

Pulsed laser deposition films from a Ba 2 FeMoO 6 target onto SrTiO 3 [001]: Chemical and magnetic inhomogeneity

Pulsed laser deposition films from Ba 2 FeMoO 6 (BFMO) targets onto SrTiO 3 [001] (STO) substrates have been reported previously to have non-zero magnetism at 300 K, a majority of magnetic ordering at 240 K that is less than the 370 K ordering temperature of polycrystalline BFMO, and suppressed saturation magnetization compared to polycrystalline BFMO. To interrogate these previously reported observations of BFMO on STO, here we have used a combination of x-ray diffraction, atomic force microscopy, x-ray and neutron reflectivity, and x-ray photoelectron spectroscopy that shows inhomogeneities. The present results show off-stoichiometry on the A-site by incorporation of Sr from the substrate and on the B-site to have %Fe/%Mo > 1 by evolution of BaMoO 4 . There is an enhanced ordering temperature and magnetic response nearer to the SrTiO 3 interface compared to the air interface. Depth dependent strain and microstructure are needed to explain the magnetic response. Finally, holistic considerations and implications are also discussed.

36 MATERIALS SCIENCE↗

Strain induced enhancement of magnetization in Ba{sub 2}FeMoO{sub 6} based heterostructure with (Ba{sub x}Sr{sub 1-x})TiO{sub 3}

High quality epitaxial Ba{sub 2}FeMoO{sub 6} thin films and Ba{sub 2}FeMoO{sub 6}–(Ba{sub x}Sr{sub 1−x})TiO{sub 3} bi-layer (BL) and superlattice (SL) structures were grown via pulsed laser deposition under low oxygen pressure, and their structural, magnetic, and magneto-transport properties were examined. Superlattice and bi-layer structures were confirmed by X-ray diffraction patterns. Low temperature magnetic measurement shows that the saturation magnetization (M{sub S}) is significantly higher for SLs and almost similar or lower for BLs, when compared to phase pure Ba{sub 2}FeMoO{sub 6} thin films. The variation of the coercive field (H{sub C}) follows exact opposite trend, where BL samples have higher H{sub C} and SL samples have lower H{sub C} than pure Ba{sub 2}FeMoO{sub 6} thin films. Also, a significant decrease of the Curie temperature is found in both BL and SL structures compared to pure Ba{sub 2}FeMoO{sub 6} thin films. Negative magneto-resistance is seen in all the BL and SL structures as well as in pure Ba{sub 2}FeMoO{sub 6} thin films. In contrast to the magnetic properties, the magneto-transport properties do not show much variation with induced strain.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The effects of oxygen pressure on disordering and magneto-transport properties of Ba{sub 2}FeMoO{sub 6} thin films grown via pulsed laser deposition

Epitaxial Ba{sub 2}FeMoO{sub 6} thin films were grown via pulsed laser deposition under low oxygen pressure and their structural, chemical, and magnetic properties were examined, focusing on the effects of oxygen pressure. The chemical disorder, off-stoichiometry in B site cations (Fe and Mo) increased with increasing oxygen pressure and thus magnetic properties were degraded. Interestingly, in contrast, negative magneto-resistance, which is the characteristics of this double perovskite material, was enhanced with increasing oxygen pressure. It is believed that phase segregation of highly disordered thin films is responsible for the increased magneto-resistance of thin films grown at high oxygen pressure. The anomalous Hall effect, which behaves hole-like, was also observed due to spin-polarized itinerant electrons under low magnetic field below 1 T and the ordinary electron-like Hall effect was dominant at higher magnetic fields.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Compositional tuning of the strain-induced structural phase transition and of ferromagnetism in Bi(1-x)Ba(x)FeO(3-delta)

Recent studies by a number of research groups have shown that the structure of epitaxial BiFeO{sub 3} (BFO) films changes drastically as a function of substrate-induced biaxial compression, with the crystal structure changing from one being nearly rhombohedral (R-like) to one being nearly tetragonal (T-like), where the ''T-like'' structure is characterized by a highly enhanced c/a ratio of out-of-plane c to in-plane a lattice parameters. In this work, we show that the critical compressive strain {sigma}{sub c} necessary to induce this transition can be reduced significantly by substituting 10% Ba for Bi [Bi{sub 0.9}Ba{sub 0.1}FeO{sub 3-{delta}} (BBFO)] and that the ''T-like'' phase in both BBFO and BFO is stable up to the decomposition temperatures of the films in air. Furthermore, our results show that the BBFO solid solution shows clear ferromagnetic properties in contrast to its undoped BFO counterpart.

36 MATERIALS SCIENCE↗

System for Hydrogen Sensing

A low-power, wireless gas-sensing system is designed to safeguard the apparatus to which it is attached, as well as associated personnel. It also ensures the efficiency and operational integrity of the hydrogen-powered apparatus. This sensing system can be operated with lower power consumption (less than 30 nanowatts), but still has a fast response. The detecting signal can be wirelessly transmitted to remote locations, or can be posted on the Web. This system can also be operated by harvesting energy.

Lin, Jenshan↗

Epitaxial growth of transparent tin oxide films on (0 0 0 1) sapphire by pulsed laser deposition

The growth of epitaxial SnO{sub 2} on (0 0 0 1) sapphire using pulsed laser deposition is examined. X-ray diffraction analysis shows that the films are highly a-axis oriented SnO{sub 2} with the rutile structure. Three distinct symmetry-equivalent in-plane epitaxial orientations were observed between the film and substrate. With increasing growth temperature, both the growth rate and surface roughness increase with columnar grain formation. Carrier concentration ranged from 10{sup 17} to 10{sup 19} cm{sup -3}, with mobility of 0.5-3 cm{sup 2}/V s. The resistivity of the films increases with increasing growth temperature, suggesting a lower density of oxygen vacancy-related defects formed during high temperature deposition.

36 MATERIALS SCIENCE↗

Epitaxial Growth of MgO/TiN Multilayers on Cu

The growth of epitaxial MgO/TiN multilayer films on (001) Cu has been investigated. In particular, epitaxial structures were grown on (001) Cu layers that were epitaxial on (001) SrTiO{sub 3}. X-ray diffraction and reflection high-energy electron diffraction indicate that the multilayer structures are epitaxial on the (001) Cu surface. The motivation is the use of crystalline MgO/TiN multilayers as a diffusion barrier to both copper and oxygen. MgO/TiN multilayers are potentially useful as diffusion barriers for Cu interconnects on semiconductors as well as for superconducting wires based on the epitaxial growth of cuprate superconductors on biaxially textured copper.

36 MATERIALS SCIENCE↗