Search NASA⌕ Search

Engineering topics

Notestein, Justin

Publications and source records attributed to Notestein, Justin.

5 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Quantifying Kinetically Relevant Species on Zr‐SiO 2 Materials for MPV Reduction

Abstract On supported metal catalysts such as Zr‐SiO 2 , it can be challenging to isolate characteristics that result from intrinsic properties of the active site from those that result from the environment surrounding the active site. In this report, we utilize in situ titration of Lewis acid sites with phosphonic acid to accurately and quantitatively describe kinetically relevant Zr species on Zr‐SiO 2 materials for the MPV reduction of cyclohexanone. We find that rate of MPV reduction on Zr‐SiO 2 materials can be described as a combination of rate over titratable Zr, that is likely well dispersed Zr, and rate over non‐titratable Zr, that is likely supported ZrO x . The fraction of Zr that is well dispersed on the SiO 2 is dependent on the surface density at which Zr is grafted but not the choice of Zr precursor. We demonstrate that phosphonic acid titration can offer a more relevant, quantitative description of Zr dispersion than UV‐vis and can be used to quantitatively describe changes that occur to the material during regeneration.

Chase, Emily↗
DOE OSTI2024

Gas-phase surface modification to control catalyst structure and yields in methane dehydroaromatization

Methane dehydroaromatization (MDA) is a promising approach for direct methane transformation to aromatics and hydrogen. The benchmark catalyst Mo/H-ZSM-5 struggles to find commercial adoption because of thermodynamically-limited yields and rapid coking on Brønsted acid and molybdenum carbide species, especially on zeolite external surfaces. Here, gas-phase atomic layer deposition (ALD) overcoats H-ZSM-5 external surfaces with SiO 2 or Al 2 O 3 . NH 3 -TPD, HRTEM, and textural properties show that these overcoats exclusively passivate zeolite external surfaces. Under MDA conditions, SiO 2 gives softer coke and increases cumulative benzene yields by 25%, while Al 2 O 3 strongly decreases yields. H 2 -TPR and UV-visible and Raman spectroscopy show how the overcoats redisperse the MoO x precatalysts, especially over multiple deactivation and isothermal oxidative regeneration cycles. Combined with 27 Al-MAS NMR, MoO x redistribution and dealumination are seen as the causes of long-term deactivation over multiple regeneration cycles, and this process continues to occur regardless of the overcoat. Altogether, the deposition of a small amount of silica on the outer surface of Mo/H-ZSM-5 reduces the formation of hard coke, which could be regenerated by milder methods such as hydrogen treatment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Bimetallic NiCu catalysts supported on a Metal-Organic framework for Non-oxidative ethanol dehydrogenation

Non-oxidative ethanol dehydrogenation is a promising route to produce acetaldehyde and hydrogen from sustainable feedstock. Bimetallic NiCu catalysts have shown high efficiency and selectivity for this chemical transformation. In this study, we leverage the high porosity and uniform catalyst deposition sites on a Zr-based metal–organic framework (MOF) catalyst support, NU-1000, to understand how the changes in Cu:Ni ratio affects the reactivity for non-oxidative ethanol dehydrogenation. We found that increasing the Ni 2+ concentration significantly reduces the activation energy of the reaction due to the role of Ni 2+ in suppressing the onset of Cu reduction. Furthermore, this study illustrates how MOFs can be used as catalyst supports to fine-tune the catalyst compositions and understand their effect on the overall catalytic performances.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Molybdenum oxide and sulfide active sites for isobutane dehydrogenation with methanol as a probe molecule

Molybdenum oxides and sulfides are alternative catalysts for several reactions, including alkane dehydrogenation. Correlations have been developed between reactivity and structure, but it is difficult to compare different catalysts without determining numbers of active sites. Here, methanol temperature programmed surface reaction (TPSR) is applied to bulk MoS 2 and a series of supported molybdenum oxides and sulfides used for isobutane dehydrogenation. Rates and deactivation behavior are similar between supported molybdenum oxides and sulfides. Coking increases with loading and correlates well with the fraction of Mo-based CO 2 -forming sites from methanol TPSR. Normalizing isobutane dehydrogenation rates by formaldehyde-forming sites unifies rates over oxide and sulfide materials. Further, these measurements confirm earlier hypotheses that MoS 2 and higher loadings of oxides and sulfides are intrinsically fast catalysts, but they have few active sites and are prone to coking. In general, methanol TPSR is proposed as an accessible route to count sites on both supported oxides and sulfides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗